From: afl1 <afl2001@gmail.com>
To: linux-amlogic@lists.infradead.org
Cc: afl1 <afl2001@gmail.com>
Subject: [PATCH] pinctrl: add tsin pins for meson-gxbb/gxl/gxm
Date: Sun, 3 Feb 2019 12:53:24 +0100 [thread overview]
Message-ID: <20190203115324.9097-2-afl2001@gmail.com> (raw)
In-Reply-To: <20190203115324.9097-1-afl2001@gmail.com>
---
drivers/pinctrl/meson/pinctrl-meson-gxbb.c | 31 ++++++++++++++++++++++
drivers/pinctrl/meson/pinctrl-meson-gxl.c | 13 +++++++++
2 files changed, 44 insertions(+)
diff --git a/drivers/pinctrl/meson/pinctrl-meson-gxbb.c b/drivers/pinctrl/meson/pinctrl-meson-gxbb.c
index 4edeb4cae72a..6de3d58277a1 100644
--- a/drivers/pinctrl/meson/pinctrl-meson-gxbb.c
+++ b/drivers/pinctrl/meson/pinctrl-meson-gxbb.c
@@ -237,10 +237,21 @@ static const unsigned int hdmi_hpd_pins[] = { GPIOH_0 };
static const unsigned int hdmi_sda_pins[] = { GPIOH_1 };
static const unsigned int hdmi_scl_pins[] = { GPIOH_2 };
+static const unsigned int tsin_a_d_valid_pins[] = { GPIOY_0 };
+static const unsigned int tsin_a_sop_pins[] = { GPIOY_1 };
+static const unsigned int tsin_a_clk_pins[] = { GPIOY_2 };
+static const unsigned int tsin_a_d0_pins[] = { GPIOY_3 };
+static const unsigned int tsin_a_dp_pins[] = { GPIOY_4, GPIOY_5, GPIOY_6, GPIOY_7, GPIOY_8, GPIOY_9, GPIOY_10 };
+static const unsigned int tsin_a_fail_pins[] = { GPIOY_11 };
static const unsigned int i2s_out_ch23_y_pins[] = { GPIOY_8 };
static const unsigned int i2s_out_ch45_y_pins[] = { GPIOY_9 };
static const unsigned int i2s_out_ch67_y_pins[] = { GPIOY_10 };
+static const unsigned int tsin_b_d_valid_pins[] = { GPIOX_6 };
+static const unsigned int tsin_b_sop_pins[] = { GPIOX_7 };
+static const unsigned int tsin_b_clk_pins[] = { GPIOX_8 };
+static const unsigned int tsin_b_d0_pins[] = { GPIOX_9 };
+
static const unsigned int spdif_out_y_pins[] = { GPIOY_12 };
static const unsigned int gen_clk_out_pins[] = { GPIOY_15 };
@@ -443,8 +454,18 @@ static struct meson_pmx_group meson_gxbb_periphs_groups[] = {
GROUP(pwm_a_x, 3, 17),
GROUP(pwm_e, 2, 30),
GROUP(pwm_f_x, 3, 18),
+ GROUP(tsin_b_d_valid, 3, 9),
+ GROUP(tsin_b_sop, 3, 8),
+ GROUP(tsin_b_clk, 3, 10),
+ GROUP(tsin_b_d0, 3, 7),
/* Bank Y */
+ GROUP(tsin_a_fail, 3, 3),
+ GROUP(tsin_a_d_valid, 3, 2),
+ GROUP(tsin_a_sop, 3, 1),
+ GROUP(tsin_a_clk, 3, 0),
+ GROUP(tsin_a_d0, 3, 4),
+ GROUP(tsin_a_dp, 3, 5),
GROUP(uart_cts_c, 1, 19),
GROUP(uart_rts_c, 1, 18),
GROUP(uart_tx_c, 1, 17),
@@ -607,6 +628,14 @@ static const char * const gpio_periphs_groups[] = {
"GPIOX_20", "GPIOX_21", "GPIOX_22",
};
+static const char * const tsin_a_groups[] = {
+ "tsin_a_clk", "tsin_a_sop", "tsin_a_d_valid", "tsin_a_d0",
+ "tsin_a_dp", "tsin_a_fail",
+};
+static const char * const tsin_b_groups[] = {
+ "tsin_b_clk", "tsin_b_sop", "tsin_b_d_valid", "tsin_b_d0",
+};
+
static const char * const emmc_groups[] = {
"emmc_nand_d07", "emmc_clk", "emmc_cmd", "emmc_ds",
};
@@ -798,6 +827,8 @@ static struct meson_pmx_func meson_gxbb_periphs_functions[] = {
FUNCTION(i2s_out),
FUNCTION(spdif_out),
FUNCTION(gen_clk_out),
+ FUNCTION(tsin_a),
+ FUNCTION(tsin_b),
};
static struct meson_pmx_func meson_gxbb_aobus_functions[] = {
diff --git a/drivers/pinctrl/meson/pinctrl-meson-gxl.c b/drivers/pinctrl/meson/pinctrl-meson-gxl.c
index 0c0a5018102b..c14090a56b61 100644
--- a/drivers/pinctrl/meson/pinctrl-meson-gxl.c
+++ b/drivers/pinctrl/meson/pinctrl-meson-gxl.c
@@ -246,6 +246,10 @@ static const unsigned int tsin_a_fail_pins[] = { GPIODV_11 };
static const unsigned int tsin_a_dp_pins[] = {
GPIODV_1, GPIODV_2, GPIODV_3, GPIODV_4, GPIODV_5, GPIODV_6, GPIODV_7,
};
+static const unsigned int tsin_b_clk_pins[] = { GPIOH_6 };
+static const unsigned int tsin_b_d0_pins[] = { GPIOH_7 };
+static const unsigned int tsin_b_sop_pins[] = { GPIOH_8 };
+static const unsigned int tsin_b_d_valid_pins[] = { GPIOH_9 };
static const struct pinctrl_pin_desc meson_gxl_aobus_pins[] = {
MESON_PIN(GPIOAO_0),
@@ -460,6 +464,10 @@ static struct meson_pmx_group meson_gxl_periphs_groups[] = {
GROUP(i2s_out_lr_clk, 6, 24),
GROUP(i2s_out_ch01, 6, 23),
GROUP(spdif_out_h, 6, 28),
+ GROUP(tsin_b_d0, 6, 17),
+ GROUP(tsin_b_sop, 6, 18),
+ GROUP(tsin_b_d_valid, 6, 19),
+ GROUP(tsin_b_clk, 6, 20),
/* Bank DV */
GROUP(uart_tx_b, 2, 16),
@@ -694,6 +702,10 @@ static const char * const tsin_a_groups[] = {
"tsin_a_d_valid", "tsin_a_d0",
"tsin_a_dp", "tsin_a_fail",
};
+static const char * const tsin_b_groups[] = {
+ "tsin_b_clk", "tsin_b_sop",
+ "tsin_b_d_valid", "tsin_b_d0",
+};
static const char * const gpio_aobus_groups[] = {
"GPIOAO_0", "GPIOAO_1", "GPIOAO_2", "GPIOAO_3", "GPIOAO_4",
@@ -770,6 +782,7 @@ static struct meson_pmx_func meson_gxl_periphs_functions[] = {
FUNCTION(spdif_out),
FUNCTION(eth_led),
FUNCTION(tsin_a),
+ FUNCTION(tsin_b),
};
static struct meson_pmx_func meson_gxl_aobus_functions[] = {
--
2.17.1
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
next prev parent reply other threads:[~2019-02-03 11:54 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-03 11:53 Add tsin pins for meson-gxbb/gxl/gxm afl1
2019-02-03 11:53 ` afl1 [this message]
2019-02-06 10:38 ` Neil Armstrong
2019-06-13 17:50 [PATCH] pinctrl: add " afl1
2019-06-13 18:02 ` afl1
2019-06-13 19:23 ` Maxime Jourdan
2019-06-13 18:38 afl1
2019-06-13 19:51 ` Kevin Hilman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190203115324.9097-2-afl2001@gmail.com \
--to=afl2001@gmail.com \
--cc=linux-amlogic@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).