[PATCH v2 0/4] clk: meson8b: add the VPU clock tree

[PATCH v2 0/4] clk: meson8b: add the VPU clock tree

[Martin Blumenstingl]

This adds the VPU clock tree for Meson8, Meson8b and Meson8m2.
The VPU clock tree is slightly different on all three SoCs. The details
are explained in patch #4.

Meson8m2 requires the previously unsupported "gp_pll" PLL. This PLL only
exists on Meson8m2 - Meson8 and Meson8b don't have it.
A separate clk_hw_onecell_data is introduced for Meson8m2 (using the
compatible string which is already available) to account for this SoC
specific clock setup.

dependencies:
This series is meant to be applied on top of my other patch from [0]:
  dt-bindings: clock: meson8b: drop the "ABP" clock definition

changes since v1 at [1]:
- fixed typo in the subject of patch #2 (spotted by Neil)
- collected Reviewed-by tags from Neil (thank you!)


[0] https://patchwork.kernel.org/patch/10860387/
[1] https://patchwork.kernel.org/cover/10860401/


Martin Blumenstingl (4):
  dt-bindings: clock: meson8b: export the VPU clock
  clk: meson: meson8b: use a separate clock table for Meson8m2
  clk: meson: meson8b: add support for the GP_PLL clock on Meson8m2
  clk: meson: meson8b: add the VPU clock trees

 drivers/clk/meson/meson8b.c              | 422 ++++++++++++++++++++++-
 drivers/clk/meson/meson8b.h              |  12 +-
 include/dt-bindings/clock/meson8b-clkc.h |   1 +
 3 files changed, 433 insertions(+), 2 deletions(-)

-- 
2.21.0


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH v2 1/4] dt-bindings: clock: meson8b: export the VPU clock

[Martin Blumenstingl]

The VPU clock is an input the the "VPU" (Video Processing Unit), which is
one of the components of the display controller.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
 include/dt-bindings/clock/meson8b-clkc.h | 1 +
 1 file changed, 1 insertion(+)

diff --git a/include/dt-bindings/clock/meson8b-clkc.h b/include/dt-bindings/clock/meson8b-clkc.h
index cd11628f50f8..2ac9469a1c27 100644
--- a/include/dt-bindings/clock/meson8b-clkc.h
+++ b/include/dt-bindings/clock/meson8b-clkc.h
@@ -107,5 +107,6 @@
 #define CLKID_PERIPH		126
 #define CLKID_AXI		128
 #define CLKID_L2_DRAM		130
+#define CLKID_VPU		190
 
 #endif /* __MESON8B_CLKC_H */
-- 
2.21.0


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH v2 2/4] clk: meson: meson8b: use a separate clock table for Meson8m2

[Martin Blumenstingl]

Meson8, Meson8b and Meson8m2 implement a similar clock controller.
However, there are a few differences between the three actual IP blocks.

One example where Meson8m2 differs from Meson8b is the VPU clock setup:
- the VPU input mux can choose between "fclk_div4", "fclk_div3",
  "fclk_div5" and "fclk_div7" on Meson8b
- however, on Meson8m2 it can choose between "fclk_div4", "fclk_div3",
  "fclk_div5" and "gp_pll" (GP_PLL only exists on Meson8m2, it's the
  predecessor of the GP0_PLL clock on GXBB/GXL/GXM))

Add a separate clk_hw_onecell_data table for Meson8m2 so these
differences can be implemented in our clock controller driver. For now
meson8m2_hw_onecell_data is a clone of our existing
meson8b_hw_onecell_data.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
---
 drivers/clk/meson/meson8b.c | 193 +++++++++++++++++++++++++++++++++++-
 1 file changed, 192 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/meson/meson8b.c b/drivers/clk/meson/meson8b.c
index 576ad42252d0..c9e6ec67d649 100644
--- a/drivers/clk/meson/meson8b.c
+++ b/drivers/clk/meson/meson8b.c
@@ -2157,6 +2157,192 @@ static struct clk_hw_onecell_data meson8b_hw_onecell_data = {
 	.num = CLK_NR_CLKS,
 };
 
+static struct clk_hw_onecell_data meson8m2_hw_onecell_data = {
+	.hws = {
+		[CLKID_XTAL] = &meson8b_xtal.hw,
+		[CLKID_PLL_FIXED] = &meson8b_fixed_pll.hw,
+		[CLKID_PLL_VID] = &meson8b_vid_pll.hw,
+		[CLKID_PLL_SYS] = &meson8b_sys_pll.hw,
+		[CLKID_FCLK_DIV2] = &meson8b_fclk_div2.hw,
+		[CLKID_FCLK_DIV3] = &meson8b_fclk_div3.hw,
+		[CLKID_FCLK_DIV4] = &meson8b_fclk_div4.hw,
+		[CLKID_FCLK_DIV5] = &meson8b_fclk_div5.hw,
+		[CLKID_FCLK_DIV7] = &meson8b_fclk_div7.hw,
+		[CLKID_CPUCLK] = &meson8b_cpu_clk.hw,
+		[CLKID_MPEG_SEL] = &meson8b_mpeg_clk_sel.hw,
+		[CLKID_MPEG_DIV] = &meson8b_mpeg_clk_div.hw,
+		[CLKID_CLK81] = &meson8b_clk81.hw,
+		[CLKID_DDR]		    = &meson8b_ddr.hw,
+		[CLKID_DOS]		    = &meson8b_dos.hw,
+		[CLKID_ISA]		    = &meson8b_isa.hw,
+		[CLKID_PL301]		    = &meson8b_pl301.hw,
+		[CLKID_PERIPHS]		    = &meson8b_periphs.hw,
+		[CLKID_SPICC]		    = &meson8b_spicc.hw,
+		[CLKID_I2C]		    = &meson8b_i2c.hw,
+		[CLKID_SAR_ADC]		    = &meson8b_sar_adc.hw,
+		[CLKID_SMART_CARD]	    = &meson8b_smart_card.hw,
+		[CLKID_RNG0]		    = &meson8b_rng0.hw,
+		[CLKID_UART0]		    = &meson8b_uart0.hw,
+		[CLKID_SDHC]		    = &meson8b_sdhc.hw,
+		[CLKID_STREAM]		    = &meson8b_stream.hw,
+		[CLKID_ASYNC_FIFO]	    = &meson8b_async_fifo.hw,
+		[CLKID_SDIO]		    = &meson8b_sdio.hw,
+		[CLKID_ABUF]		    = &meson8b_abuf.hw,
+		[CLKID_HIU_IFACE]	    = &meson8b_hiu_iface.hw,
+		[CLKID_ASSIST_MISC]	    = &meson8b_assist_misc.hw,
+		[CLKID_SPI]		    = &meson8b_spi.hw,
+		[CLKID_I2S_SPDIF]	    = &meson8b_i2s_spdif.hw,
+		[CLKID_ETH]		    = &meson8b_eth.hw,
+		[CLKID_DEMUX]		    = &meson8b_demux.hw,
+		[CLKID_AIU_GLUE]	    = &meson8b_aiu_glue.hw,
+		[CLKID_IEC958]		    = &meson8b_iec958.hw,
+		[CLKID_I2S_OUT]		    = &meson8b_i2s_out.hw,
+		[CLKID_AMCLK]		    = &meson8b_amclk.hw,
+		[CLKID_AIFIFO2]		    = &meson8b_aififo2.hw,
+		[CLKID_MIXER]		    = &meson8b_mixer.hw,
+		[CLKID_MIXER_IFACE]	    = &meson8b_mixer_iface.hw,
+		[CLKID_ADC]		    = &meson8b_adc.hw,
+		[CLKID_BLKMV]		    = &meson8b_blkmv.hw,
+		[CLKID_AIU]		    = &meson8b_aiu.hw,
+		[CLKID_UART1]		    = &meson8b_uart1.hw,
+		[CLKID_G2D]		    = &meson8b_g2d.hw,
+		[CLKID_USB0]		    = &meson8b_usb0.hw,
+		[CLKID_USB1]		    = &meson8b_usb1.hw,
+		[CLKID_RESET]		    = &meson8b_reset.hw,
+		[CLKID_NAND]		    = &meson8b_nand.hw,
+		[CLKID_DOS_PARSER]	    = &meson8b_dos_parser.hw,
+		[CLKID_USB]		    = &meson8b_usb.hw,
+		[CLKID_VDIN1]		    = &meson8b_vdin1.hw,
+		[CLKID_AHB_ARB0]	    = &meson8b_ahb_arb0.hw,
+		[CLKID_EFUSE]		    = &meson8b_efuse.hw,
+		[CLKID_BOOT_ROM]	    = &meson8b_boot_rom.hw,
+		[CLKID_AHB_DATA_BUS]	    = &meson8b_ahb_data_bus.hw,
+		[CLKID_AHB_CTRL_BUS]	    = &meson8b_ahb_ctrl_bus.hw,
+		[CLKID_HDMI_INTR_SYNC]	    = &meson8b_hdmi_intr_sync.hw,
+		[CLKID_HDMI_PCLK]	    = &meson8b_hdmi_pclk.hw,
+		[CLKID_USB1_DDR_BRIDGE]	    = &meson8b_usb1_ddr_bridge.hw,
+		[CLKID_USB0_DDR_BRIDGE]	    = &meson8b_usb0_ddr_bridge.hw,
+		[CLKID_MMC_PCLK]	    = &meson8b_mmc_pclk.hw,
+		[CLKID_DVIN]		    = &meson8b_dvin.hw,
+		[CLKID_UART2]		    = &meson8b_uart2.hw,
+		[CLKID_SANA]		    = &meson8b_sana.hw,
+		[CLKID_VPU_INTR]	    = &meson8b_vpu_intr.hw,
+		[CLKID_SEC_AHB_AHB3_BRIDGE] = &meson8b_sec_ahb_ahb3_bridge.hw,
+		[CLKID_CLK81_A9]	    = &meson8b_clk81_a9.hw,
+		[CLKID_VCLK2_VENCI0]	    = &meson8b_vclk2_venci0.hw,
+		[CLKID_VCLK2_VENCI1]	    = &meson8b_vclk2_venci1.hw,
+		[CLKID_VCLK2_VENCP0]	    = &meson8b_vclk2_vencp0.hw,
+		[CLKID_VCLK2_VENCP1]	    = &meson8b_vclk2_vencp1.hw,
+		[CLKID_GCLK_VENCI_INT]	    = &meson8b_gclk_venci_int.hw,
+		[CLKID_GCLK_VENCP_INT]	    = &meson8b_gclk_vencp_int.hw,
+		[CLKID_DAC_CLK]		    = &meson8b_dac_clk.hw,
+		[CLKID_AOCLK_GATE]	    = &meson8b_aoclk_gate.hw,
+		[CLKID_IEC958_GATE]	    = &meson8b_iec958_gate.hw,
+		[CLKID_ENC480P]		    = &meson8b_enc480p.hw,
+		[CLKID_RNG1]		    = &meson8b_rng1.hw,
+		[CLKID_GCLK_VENCL_INT]	    = &meson8b_gclk_vencl_int.hw,
+		[CLKID_VCLK2_VENCLMCC]	    = &meson8b_vclk2_venclmcc.hw,
+		[CLKID_VCLK2_VENCL]	    = &meson8b_vclk2_vencl.hw,
+		[CLKID_VCLK2_OTHER]	    = &meson8b_vclk2_other.hw,
+		[CLKID_EDP]		    = &meson8b_edp.hw,
+		[CLKID_AO_MEDIA_CPU]	    = &meson8b_ao_media_cpu.hw,
+		[CLKID_AO_AHB_SRAM]	    = &meson8b_ao_ahb_sram.hw,
+		[CLKID_AO_AHB_BUS]	    = &meson8b_ao_ahb_bus.hw,
+		[CLKID_AO_IFACE]	    = &meson8b_ao_iface.hw,
+		[CLKID_MPLL0]		    = &meson8b_mpll0.hw,
+		[CLKID_MPLL1]		    = &meson8b_mpll1.hw,
+		[CLKID_MPLL2]		    = &meson8b_mpll2.hw,
+		[CLKID_MPLL0_DIV]	    = &meson8b_mpll0_div.hw,
+		[CLKID_MPLL1_DIV]	    = &meson8b_mpll1_div.hw,
+		[CLKID_MPLL2_DIV]	    = &meson8b_mpll2_div.hw,
+		[CLKID_CPU_IN_SEL]	    = &meson8b_cpu_in_sel.hw,
+		[CLKID_CPU_IN_DIV2]	    = &meson8b_cpu_in_div2.hw,
+		[CLKID_CPU_IN_DIV3]	    = &meson8b_cpu_in_div3.hw,
+		[CLKID_CPU_SCALE_DIV]	    = &meson8b_cpu_scale_div.hw,
+		[CLKID_CPU_SCALE_OUT_SEL]   = &meson8b_cpu_scale_out_sel.hw,
+		[CLKID_MPLL_PREDIV]	    = &meson8b_mpll_prediv.hw,
+		[CLKID_FCLK_DIV2_DIV]	    = &meson8b_fclk_div2_div.hw,
+		[CLKID_FCLK_DIV3_DIV]	    = &meson8b_fclk_div3_div.hw,
+		[CLKID_FCLK_DIV4_DIV]	    = &meson8b_fclk_div4_div.hw,
+		[CLKID_FCLK_DIV5_DIV]	    = &meson8b_fclk_div5_div.hw,
+		[CLKID_FCLK_DIV7_DIV]	    = &meson8b_fclk_div7_div.hw,
+		[CLKID_NAND_SEL]	    = &meson8b_nand_clk_sel.hw,
+		[CLKID_NAND_DIV]	    = &meson8b_nand_clk_div.hw,
+		[CLKID_NAND_CLK]	    = &meson8b_nand_clk_gate.hw,
+		[CLKID_PLL_FIXED_DCO]	    = &meson8b_fixed_pll_dco.hw,
+		[CLKID_HDMI_PLL_DCO]	    = &meson8b_hdmi_pll_dco.hw,
+		[CLKID_PLL_SYS_DCO]	    = &meson8b_sys_pll_dco.hw,
+		[CLKID_CPU_CLK_DIV2]	    = &meson8b_cpu_clk_div2.hw,
+		[CLKID_CPU_CLK_DIV3]	    = &meson8b_cpu_clk_div3.hw,
+		[CLKID_CPU_CLK_DIV4]	    = &meson8b_cpu_clk_div4.hw,
+		[CLKID_CPU_CLK_DIV5]	    = &meson8b_cpu_clk_div5.hw,
+		[CLKID_CPU_CLK_DIV6]	    = &meson8b_cpu_clk_div6.hw,
+		[CLKID_CPU_CLK_DIV7]	    = &meson8b_cpu_clk_div7.hw,
+		[CLKID_CPU_CLK_DIV8]	    = &meson8b_cpu_clk_div8.hw,
+		[CLKID_APB_SEL]		    = &meson8b_apb_clk_sel.hw,
+		[CLKID_APB]		    = &meson8b_apb_clk_gate.hw,
+		[CLKID_PERIPH_SEL]	    = &meson8b_periph_clk_sel.hw,
+		[CLKID_PERIPH]		    = &meson8b_periph_clk_gate.hw,
+		[CLKID_AXI_SEL]		    = &meson8b_axi_clk_sel.hw,
+		[CLKID_AXI]		    = &meson8b_axi_clk_gate.hw,
+		[CLKID_L2_DRAM_SEL]	    = &meson8b_l2_dram_clk_sel.hw,
+		[CLKID_L2_DRAM]		    = &meson8b_l2_dram_clk_gate.hw,
+		[CLKID_HDMI_PLL_LVDS_OUT]   = &meson8b_hdmi_pll_lvds_out.hw,
+		[CLKID_HDMI_PLL_HDMI_OUT]   = &meson8b_hdmi_pll_hdmi_out.hw,
+		[CLKID_VID_PLL_IN_SEL]	    = &meson8b_vid_pll_in_sel.hw,
+		[CLKID_VID_PLL_IN_EN]	    = &meson8b_vid_pll_in_en.hw,
+		[CLKID_VID_PLL_PRE_DIV]	    = &meson8b_vid_pll_pre_div.hw,
+		[CLKID_VID_PLL_POST_DIV]    = &meson8b_vid_pll_post_div.hw,
+		[CLKID_VID_PLL_FINAL_DIV]   = &meson8b_vid_pll_final_div.hw,
+		[CLKID_VCLK_IN_SEL]	    = &meson8b_vclk_in_sel.hw,
+		[CLKID_VCLK_IN_EN]	    = &meson8b_vclk_in_en.hw,
+		[CLKID_VCLK_DIV1]	    = &meson8b_vclk_div1_gate.hw,
+		[CLKID_VCLK_DIV2_DIV]	    = &meson8b_vclk_div2_div.hw,
+		[CLKID_VCLK_DIV2]	    = &meson8b_vclk_div2_div_gate.hw,
+		[CLKID_VCLK_DIV4_DIV]	    = &meson8b_vclk_div4_div.hw,
+		[CLKID_VCLK_DIV4]	    = &meson8b_vclk_div4_div_gate.hw,
+		[CLKID_VCLK_DIV6_DIV]	    = &meson8b_vclk_div6_div.hw,
+		[CLKID_VCLK_DIV6]	    = &meson8b_vclk_div6_div_gate.hw,
+		[CLKID_VCLK_DIV12_DIV]	    = &meson8b_vclk_div12_div.hw,
+		[CLKID_VCLK_DIV12]	    = &meson8b_vclk_div12_div_gate.hw,
+		[CLKID_VCLK2_IN_SEL]	    = &meson8b_vclk2_in_sel.hw,
+		[CLKID_VCLK2_IN_EN]	    = &meson8b_vclk2_clk_in_en.hw,
+		[CLKID_VCLK2_DIV1]	    = &meson8b_vclk2_div1_gate.hw,
+		[CLKID_VCLK2_DIV2_DIV]	    = &meson8b_vclk2_div2_div.hw,
+		[CLKID_VCLK2_DIV2]	    = &meson8b_vclk2_div2_div_gate.hw,
+		[CLKID_VCLK2_DIV4_DIV]	    = &meson8b_vclk2_div4_div.hw,
+		[CLKID_VCLK2_DIV4]	    = &meson8b_vclk2_div4_div_gate.hw,
+		[CLKID_VCLK2_DIV6_DIV]	    = &meson8b_vclk2_div6_div.hw,
+		[CLKID_VCLK2_DIV6]	    = &meson8b_vclk2_div6_div_gate.hw,
+		[CLKID_VCLK2_DIV12_DIV]	    = &meson8b_vclk2_div12_div.hw,
+		[CLKID_VCLK2_DIV12]	    = &meson8b_vclk2_div12_div_gate.hw,
+		[CLKID_CTS_ENCT_SEL]	    = &meson8b_cts_enct_sel.hw,
+		[CLKID_CTS_ENCT]	    = &meson8b_cts_enct.hw,
+		[CLKID_CTS_ENCP_SEL]	    = &meson8b_cts_encp_sel.hw,
+		[CLKID_CTS_ENCP]	    = &meson8b_cts_encp.hw,
+		[CLKID_CTS_ENCI_SEL]	    = &meson8b_cts_enci_sel.hw,
+		[CLKID_CTS_ENCI]	    = &meson8b_cts_enci.hw,
+		[CLKID_HDMI_TX_PIXEL_SEL]   = &meson8b_hdmi_tx_pixel_sel.hw,
+		[CLKID_HDMI_TX_PIXEL]	    = &meson8b_hdmi_tx_pixel.hw,
+		[CLKID_CTS_ENCL_SEL]	    = &meson8b_cts_encl_sel.hw,
+		[CLKID_CTS_ENCL]	    = &meson8b_cts_encl.hw,
+		[CLKID_CTS_VDAC0_SEL]	    = &meson8b_cts_vdac0_sel.hw,
+		[CLKID_CTS_VDAC0]	    = &meson8b_cts_vdac0.hw,
+		[CLKID_HDMI_SYS_SEL]	    = &meson8b_hdmi_sys_sel.hw,
+		[CLKID_HDMI_SYS_DIV]	    = &meson8b_hdmi_sys_div.hw,
+		[CLKID_HDMI_SYS]	    = &meson8b_hdmi_sys.hw,
+		[CLKID_MALI_0_SEL]	    = &meson8b_mali_0_sel.hw,
+		[CLKID_MALI_0_DIV]	    = &meson8b_mali_0_div.hw,
+		[CLKID_MALI_0]		    = &meson8b_mali_0.hw,
+		[CLKID_MALI_1_SEL]	    = &meson8b_mali_1_sel.hw,
+		[CLKID_MALI_1_DIV]	    = &meson8b_mali_1_div.hw,
+		[CLKID_MALI_1]		    = &meson8b_mali_1.hw,
+		[CLKID_MALI]		    = &meson8b_mali.hw,
+		[CLK_NR_CLKS]		    = NULL,
+	},
+	.num = CLK_NR_CLKS,
+};
+
 static struct clk_regmap *const meson8b_clk_regmaps[] = {
 	&meson8b_clk81,
 	&meson8b_ddr,
@@ -2558,9 +2744,14 @@ static void __init meson8b_clkc_init(struct device_node *np)
 	return meson8b_clkc_init_common(np, &meson8b_hw_onecell_data);
 }
 
+static void __init meson8m2_clkc_init(struct device_node *np)
+{
+	return meson8b_clkc_init_common(np, &meson8m2_hw_onecell_data);
+}
+
 CLK_OF_DECLARE_DRIVER(meson8_clkc, "amlogic,meson8-clkc",
 		      meson8_clkc_init);
 CLK_OF_DECLARE_DRIVER(meson8b_clkc, "amlogic,meson8b-clkc",
 		      meson8b_clkc_init);
 CLK_OF_DECLARE_DRIVER(meson8m2_clkc, "amlogic,meson8m2-clkc",
-		      meson8b_clkc_init);
+		      meson8m2_clkc_init);
-- 
2.21.0


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH v2 3/4] clk: meson: meson8b: add support for the GP_PLL clock on Meson8m2

[Martin Blumenstingl]

Meson8m2 has a GP_PLL clock (similar to GP0_PLL on GXBB/GXL/GXM) which
is used as input for the VPU clocks.
The only supported frequency (based on Amlogic's vendor kernel sources)
is 364MHz which is achieved using the following parameters:
- input: XTAL (24MHz)
- M = 182
- N = 3
- OD = 2 ^ 2

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
---
 drivers/clk/meson/meson8b.c | 62 +++++++++++++++++++++++++++++++++++++
 drivers/clk/meson/meson8b.h |  5 ++-
 2 files changed, 66 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/meson/meson8b.c b/drivers/clk/meson/meson8b.c
index c9e6ec67d649..0d08f1ef7af8 100644
--- a/drivers/clk/meson/meson8b.c
+++ b/drivers/clk/meson/meson8b.c
@@ -1703,6 +1703,64 @@ static struct clk_regmap meson8b_mali = {
 	},
 };
 
+static const struct pll_params_table meson8m2_gp_pll_params_table[] = {
+	PLL_PARAMS(182, 3),
+	{ /* sentinel */ },
+};
+
+static struct clk_regmap meson8m2_gp_pll_dco = {
+	.data = &(struct meson_clk_pll_data){
+		.en = {
+			.reg_off = HHI_GP_PLL_CNTL,
+			.shift   = 30,
+			.width   = 1,
+		},
+		.m = {
+			.reg_off = HHI_GP_PLL_CNTL,
+			.shift   = 0,
+			.width   = 9,
+		},
+		.n = {
+			.reg_off = HHI_GP_PLL_CNTL,
+			.shift   = 9,
+			.width   = 5,
+		},
+		.l = {
+			.reg_off = HHI_GP_PLL_CNTL,
+			.shift   = 31,
+			.width   = 1,
+		},
+		.rst = {
+			.reg_off = HHI_GP_PLL_CNTL,
+			.shift   = 29,
+			.width   = 1,
+		},
+		.table = meson8m2_gp_pll_params_table,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "gp_pll_dco",
+		.ops = &meson_clk_pll_ops,
+		.parent_names = (const char *[]){ "xtal" },
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap meson8m2_gp_pll = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = HHI_GP_PLL_CNTL,
+		.shift = 16,
+		.width = 2,
+		.flags = CLK_DIVIDER_POWER_OF_TWO,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "gp_pll",
+		.ops = &clk_regmap_divider_ops,
+		.parent_names = (const char *[]){ "gp_pll_dco" },
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
 /* Everything Else (EE) domain gates */
 
 static MESON_GATE(meson8b_ddr, HHI_GCLK_MPEG0, 0);
@@ -2338,6 +2396,8 @@ static struct clk_hw_onecell_data meson8m2_hw_onecell_data = {
 		[CLKID_MALI_1_DIV]	    = &meson8b_mali_1_div.hw,
 		[CLKID_MALI_1]		    = &meson8b_mali_1.hw,
 		[CLKID_MALI]		    = &meson8b_mali.hw,
+		[CLKID_GP_PLL_DCO]	    = &meson8m2_gp_pll_dco.hw,
+		[CLKID_GP_PLL]		    = &meson8m2_gp_pll.hw,
 		[CLK_NR_CLKS]		    = NULL,
 	},
 	.num = CLK_NR_CLKS,
@@ -2500,6 +2560,8 @@ static struct clk_regmap *const meson8b_clk_regmaps[] = {
 	&meson8b_mali_1_div,
 	&meson8b_mali_1,
 	&meson8b_mali,
+	&meson8m2_gp_pll_dco,
+	&meson8m2_gp_pll,
 };
 
 static const struct meson8b_clk_reset_line {
diff --git a/drivers/clk/meson/meson8b.h b/drivers/clk/meson/meson8b.h
index b8c58faeae52..a45f7102c558 100644
--- a/drivers/clk/meson/meson8b.h
+++ b/drivers/clk/meson/meson8b.h
@@ -19,6 +19,7 @@
  *
  * [0] http://dn.odroid.com/S805/Datasheet/S805_Datasheet%20V0.8%2020150126.pdf
  */
+#define HHI_GP_PLL_CNTL			0x40  /* 0x10 offset in data sheet */
 #define HHI_VIID_CLK_DIV		0x128 /* 0x4a offset in data sheet */
 #define HHI_VIID_CLK_CNTL		0x12c /* 0x4b offset in data sheet */
 #define HHI_GCLK_MPEG0			0x140 /* 0x50 offset in data sheet */
@@ -146,8 +147,10 @@
 #define CLKID_MALI_1_SEL	178
 #define CLKID_MALI_1_DIV	179
 #define CLKID_MALI_1		180
+#define CLKID_GP_PLL_DCO	181
+#define CLKID_GP_PLL		182
 
-#define CLK_NR_CLKS		181
+#define CLK_NR_CLKS		183
 
 /*
  * include the CLKID and RESETID that have
-- 
2.21.0


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH v2 4/4] clk: meson: meson8b: add the VPU clock trees

[Martin Blumenstingl]

The VPU clock tree is slightly different on all three supported SoCs:

Meson8 only has an input mux (which chooses between "fclk_div4",
"fclk_div3", "fclk_div5" and "fclk_div7"), a divider and a gate.

Meson8b has two VPU clock trees, each with an input mux (using the same
parents as the input mux on Meson8), divider and a gates. The final VPU
clock is a glitch-free mux which chooses between VPU_1 and VPU_2.

Meson8m2 uses a similar clock tree as Meson8b but the last input clock
is different: instead of using "fclk_div7" as input Meson8m2 uses
"gp_pll". This was probably done in hardware to improve the accuracy of
the clock because fclk_div7 gives us 2550MHz / 7 = 364.286MHz while
GP_PLL can achieve 364.0MHz.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
---
 drivers/clk/meson/meson8b.c | 167 ++++++++++++++++++++++++++++++++++++
 drivers/clk/meson/meson8b.h |   9 +-
 2 files changed, 175 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/meson/meson8b.c b/drivers/clk/meson/meson8b.c
index 0d08f1ef7af8..8e091c2d10e6 100644
--- a/drivers/clk/meson/meson8b.c
+++ b/drivers/clk/meson/meson8b.c
@@ -1761,6 +1761,147 @@ static struct clk_regmap meson8m2_gp_pll = {
 	},
 };
 
+static const char * const mmeson8b_vpu_0_1_parent_names[] = {
+	"fclk_div4", "fclk_div3", "fclk_div5", "fclk_div7"
+};
+
+static const char * const mmeson8m2_vpu_0_1_parent_names[] = {
+	"fclk_div4", "fclk_div3", "fclk_div5", "gp_pll"
+};
+
+static struct clk_regmap meson8b_vpu_0_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = HHI_VPU_CLK_CNTL,
+		.mask = 0x3,
+		.shift = 9,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "vpu_0_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_names = mmeson8b_vpu_0_1_parent_names,
+		.num_parents = ARRAY_SIZE(mmeson8b_vpu_0_1_parent_names),
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap meson8m2_vpu_0_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = HHI_VPU_CLK_CNTL,
+		.mask = 0x3,
+		.shift = 9,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "vpu_0_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_names = mmeson8m2_vpu_0_1_parent_names,
+		.num_parents = ARRAY_SIZE(mmeson8m2_vpu_0_1_parent_names),
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap meson8b_vpu_0_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = HHI_VPU_CLK_CNTL,
+		.shift = 0,
+		.width = 7,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "vpu_0_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_names = (const char *[]){ "vpu_0_sel" },
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap meson8b_vpu_0 = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = HHI_VPU_CLK_CNTL,
+		.bit_idx = 8,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "vpu_0",
+		.ops = &clk_regmap_gate_ops,
+		.parent_names = (const char *[]){ "vpu_0_div" },
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap meson8b_vpu_1_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = HHI_VPU_CLK_CNTL,
+		.mask = 0x3,
+		.shift = 25,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "vpu_1_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_names = mmeson8b_vpu_0_1_parent_names,
+		.num_parents = ARRAY_SIZE(mmeson8b_vpu_0_1_parent_names),
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap meson8m2_vpu_1_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = HHI_VPU_CLK_CNTL,
+		.mask = 0x3,
+		.shift = 25,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "vpu_1_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_names = mmeson8m2_vpu_0_1_parent_names,
+		.num_parents = ARRAY_SIZE(mmeson8m2_vpu_0_1_parent_names),
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap meson8b_vpu_1_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = HHI_VPU_CLK_CNTL,
+		.shift = 16,
+		.width = 7,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "vpu_1_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_names = (const char *[]){ "vpu_1_sel" },
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap meson8b_vpu_1 = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = HHI_VPU_CLK_CNTL,
+		.bit_idx = 24,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "vpu_1",
+		.ops = &clk_regmap_gate_ops,
+		.parent_names = (const char *[]){ "vpu_1_div" },
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap meson8b_vpu = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = HHI_VPU_CLK_CNTL,
+		.mask = 1,
+		.shift = 31,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "vpu",
+		.ops = &clk_regmap_mux_ops,
+		.parent_names = (const char *[]){ "vpu_0", "vpu_1" },
+		.num_parents = 2,
+		.flags = CLK_SET_RATE_NO_REPARENT,
+	},
+};
+
 /* Everything Else (EE) domain gates */
 
 static MESON_GATE(meson8b_ddr, HHI_GCLK_MPEG0, 0);
@@ -2024,6 +2165,9 @@ static struct clk_hw_onecell_data meson8_hw_onecell_data = {
 		[CLKID_MALI_0_SEL]	    = &meson8b_mali_0_sel.hw,
 		[CLKID_MALI_0_DIV]	    = &meson8b_mali_0_div.hw,
 		[CLKID_MALI]		    = &meson8b_mali_0.hw,
+		[CLKID_VPU_0_SEL]	    = &meson8b_vpu_0_sel.hw,
+		[CLKID_VPU_0_DIV]	    = &meson8b_vpu_0_div.hw,
+		[CLKID_VPU]		    = &meson8b_vpu_0.hw,
 		[CLK_NR_CLKS]		    = NULL,
 	},
 	.num = CLK_NR_CLKS,
@@ -2210,6 +2354,13 @@ static struct clk_hw_onecell_data meson8b_hw_onecell_data = {
 		[CLKID_MALI_1_DIV]	    = &meson8b_mali_1_div.hw,
 		[CLKID_MALI_1]		    = &meson8b_mali_1.hw,
 		[CLKID_MALI]		    = &meson8b_mali.hw,
+		[CLKID_VPU_0_SEL]	    = &meson8b_vpu_0_sel.hw,
+		[CLKID_VPU_0_DIV]	    = &meson8b_vpu_0_div.hw,
+		[CLKID_VPU_0]		    = &meson8b_vpu_0.hw,
+		[CLKID_VPU_1_SEL]	    = &meson8b_vpu_1_sel.hw,
+		[CLKID_VPU_1_DIV]	    = &meson8b_vpu_1_div.hw,
+		[CLKID_VPU_1]		    = &meson8b_vpu_1.hw,
+		[CLKID_VPU]		    = &meson8b_vpu.hw,
 		[CLK_NR_CLKS]		    = NULL,
 	},
 	.num = CLK_NR_CLKS,
@@ -2398,6 +2549,13 @@ static struct clk_hw_onecell_data meson8m2_hw_onecell_data = {
 		[CLKID_MALI]		    = &meson8b_mali.hw,
 		[CLKID_GP_PLL_DCO]	    = &meson8m2_gp_pll_dco.hw,
 		[CLKID_GP_PLL]		    = &meson8m2_gp_pll.hw,
+		[CLKID_VPU_0_SEL]	    = &meson8m2_vpu_0_sel.hw,
+		[CLKID_VPU_0_DIV]	    = &meson8b_vpu_0_div.hw,
+		[CLKID_VPU_0]		    = &meson8b_vpu_0.hw,
+		[CLKID_VPU_1_SEL]	    = &meson8m2_vpu_1_sel.hw,
+		[CLKID_VPU_1_DIV]	    = &meson8b_vpu_1_div.hw,
+		[CLKID_VPU_1]		    = &meson8b_vpu_1.hw,
+		[CLKID_VPU]		    = &meson8b_vpu.hw,
 		[CLK_NR_CLKS]		    = NULL,
 	},
 	.num = CLK_NR_CLKS,
@@ -2562,6 +2720,15 @@ static struct clk_regmap *const meson8b_clk_regmaps[] = {
 	&meson8b_mali,
 	&meson8m2_gp_pll_dco,
 	&meson8m2_gp_pll,
+	&meson8b_vpu_0_sel,
+	&meson8m2_vpu_0_sel,
+	&meson8b_vpu_0_div,
+	&meson8b_vpu_0,
+	&meson8b_vpu_1_sel,
+	&meson8m2_vpu_1_sel,
+	&meson8b_vpu_1_div,
+	&meson8b_vpu_1,
+	&meson8b_vpu,
 };
 
 static const struct meson8b_clk_reset_line {
diff --git a/drivers/clk/meson/meson8b.h b/drivers/clk/meson/meson8b.h
index a45f7102c558..e775f91ccce9 100644
--- a/drivers/clk/meson/meson8b.h
+++ b/drivers/clk/meson/meson8b.h
@@ -35,6 +35,7 @@
 #define HHI_VID_DIVIDER_CNTL		0x198 /* 0x66 offset in data sheet */
 #define HHI_SYS_CPU_CLK_CNTL0		0x19c /* 0x67 offset in data sheet */
 #define HHI_MALI_CLK_CNTL		0x1b0 /* 0x6c offset in data sheet */
+#define HHI_VPU_CLK_CNTL		0x1bc /* 0x6f offset in data sheet */
 #define HHI_HDMI_CLK_CNTL		0x1cc /* 0x73 offset in data sheet */
 #define HHI_NAND_CLK_CNTL		0x25c /* 0x97 offset in data sheet */
 #define HHI_MPLL_CNTL			0x280 /* 0xa0 offset in data sheet */
@@ -149,8 +150,14 @@
 #define CLKID_MALI_1		180
 #define CLKID_GP_PLL_DCO	181
 #define CLKID_GP_PLL		182
+#define CLKID_VPU_0_SEL		183
+#define CLKID_VPU_0_DIV		184
+#define CLKID_VPU_0		185
+#define CLKID_VPU_1_SEL		186
+#define CLKID_VPU_1_DIV		187
+#define CLKID_VPU_1		189
 
-#define CLK_NR_CLKS		183
+#define CLK_NR_CLKS		191
 
 /*
  * include the CLKID and RESETID that have
-- 
2.21.0


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH v2 0/4] clk: meson8b: add the VPU clock tree

[Jerome Brunet]

On Sun, 2019-03-24 at 16:11 +0100, Martin Blumenstingl wrote:
> This adds the VPU clock tree for Meson8, Meson8b and Meson8m2.
> The VPU clock tree is slightly different on all three SoCs. The details
> are explained in patch #4.
> 
> Meson8m2 requires the previously unsupported "gp_pll" PLL. This PLL only
> exists on Meson8m2 - Meson8 and Meson8b don't have it.
> A separate clk_hw_onecell_data is introduced for Meson8m2 (using the
> compatible string which is already available) to account for this SoC
> specific clock setup.
> 
> dependencies:
> This series is meant to be applied on top of my other patch from [0]:
>   dt-bindings: clock: meson8b: drop the "ABP" clock definition
> 
> changes since v1 at [1]:
> - fixed typo in the subject of patch #2 (spotted by Neil)
> - collected Reviewed-by tags from Neil (thank you!)
> 
> 
> [0] https://patchwork.kernel.org/patch/10860387/
> [1] https://patchwork.kernel.org/cover/10860401/
> 
> 
> Martin Blumenstingl (4):
>   dt-bindings: clock: meson8b: export the VPU clock
>   clk: meson: meson8b: use a separate clock table for Meson8m2
>   clk: meson: meson8b: add support for the GP_PLL clock on Meson8m2
>   clk: meson: meson8b: add the VPU clock trees
> 
>  drivers/clk/meson/meson8b.c              | 422 ++++++++++++++++++++++-
>  drivers/clk/meson/meson8b.h              |  12 +-
>  include/dt-bindings/clock/meson8b-clkc.h |   1 +
>  3 files changed, 433 insertions(+), 2 deletions(-)
> 

Looks sane.

Acked-by: Jerome Brunet <jbrunet@baylibre.com>


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH v2 1/4] dt-bindings: clock: meson8b: export the VPU clock

[Rob Herring]

On Sun, 24 Mar 2019 16:11:01 +0100, Martin Blumenstingl wrote:
> The VPU clock is an input the the "VPU" (Video Processing Unit), which is
> one of the components of the display controller.
> 
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> ---
>  include/dt-bindings/clock/meson8b-clkc.h | 1 +
>  1 file changed, 1 insertion(+)
> 

Reviewed-by: Rob Herring <robh@kernel.org>


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH v2 0/4] clk: meson8b: add the VPU clock tree

[Neil Armstrong]

On 24/03/2019 16:11, Martin Blumenstingl wrote:
> This adds the VPU clock tree for Meson8, Meson8b and Meson8m2.
> The VPU clock tree is slightly different on all three SoCs. The details
> are explained in patch #4.
> 
> Meson8m2 requires the previously unsupported "gp_pll" PLL. This PLL only
> exists on Meson8m2 - Meson8 and Meson8b don't have it.
> A separate clk_hw_onecell_data is introduced for Meson8m2 (using the
> compatible string which is already available) to account for this SoC
> specific clock setup.
> 
> dependencies:
> This series is meant to be applied on top of my other patch from [0]:
>   dt-bindings: clock: meson8b: drop the "ABP" clock definition
> 
> changes since v1 at [1]:
> - fixed typo in the subject of patch #2 (spotted by Neil)
> - collected Reviewed-by tags from Neil (thank you!)
> 
> 
> [0] https://patchwork.kernel.org/patch/10860387/
> [1] https://patchwork.kernel.org/cover/10860401/
> 
> 
> Martin Blumenstingl (4):
>   dt-bindings: clock: meson8b: export the VPU clock
>   clk: meson: meson8b: use a separate clock table for Meson8m2
>   clk: meson: meson8b: add support for the GP_PLL clock on Meson8m2
>   clk: meson: meson8b: add the VPU clock trees
> 
>  drivers/clk/meson/meson8b.c              | 422 ++++++++++++++++++++++-
>  drivers/clk/meson/meson8b.h              |  12 +-
>  include/dt-bindings/clock/meson8b-clkc.h |   1 +
>  3 files changed, 433 insertions(+), 2 deletions(-)
> 

Applied [1] to next/headers the [2,3,4] to next/drivers for Linux 5.2-rc1

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic