[PATCH 05/11] drm/meson: Add G12A support for OSD1 Plane

[Neil Armstrong <narmstrong@baylibre.com>]

Amlogic G12A SoC supports now up to 3 OSD planes (1 more than the
previous SoCs) and a brand new OSD plane blender module.

This patch uses the same OSD1 plane G12A, using the exact same scaler
and OSD1 setup registers, except using the new blender register to
disable the plane.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 drivers/gpu/drm/meson/meson_plane.c | 15 +++++++++++++--
 1 file changed, 13 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/meson/meson_plane.c b/drivers/gpu/drm/meson/meson_plane.c
index b7786218cb10..bf8f1fab63aa 100644
--- a/drivers/gpu/drm/meson/meson_plane.c
+++ b/drivers/gpu/drm/meson/meson_plane.c
@@ -294,6 +294,13 @@ static void meson_plane_atomic_update(struct drm_plane *plane,
 	priv->viu.osd1_blk0_cfg[3] = ((dest.x2 - 1) << 16) | dest.x1;
 	priv->viu.osd1_blk0_cfg[4] = ((dest.y2 - 1) << 16) | dest.y1;
 
+	if (meson_vpu_is_compatible(priv, "amlogic,meson-g12a-vpu")) {
+		priv->viu.osd_blend_din0_scope_h = ((dest.x2 - 1) << 16) | dest.x1;
+		priv->viu.osd_blend_din0_scope_v = ((dest.y2 - 1) << 16) | dest.y1;
+		priv->viu.osb_blend0_size = dst_h << 16 | dst_w;
+		priv->viu.osb_blend1_size = dst_h << 16 | dst_w;
+	}
+
 	/* Update Canvas with buffer address */
 	gem = drm_fb_cma_get_gem_obj(fb, 0);
 
@@ -320,8 +327,12 @@ static void meson_plane_atomic_disable(struct drm_plane *plane,
 	struct meson_drm *priv = meson_plane->priv;
 
 	/* Disable OSD1 */
-	writel_bits_relaxed(VPP_OSD1_POSTBLEND, 0,
-			    priv->io_base + _REG(VPP_MISC));
+	if (meson_vpu_is_compatible(priv, "amlogic,meson-g12a-vpu"))
+		writel_bits_relaxed(BIT(0) | BIT(21), 0,
+			priv->io_base + _REG(VIU_OSD1_CTRL_STAT));
+	else
+		writel_bits_relaxed(VPP_OSD1_POSTBLEND, 0,
+				    priv->io_base + _REG(VPP_MISC));
 
 	meson_plane->enabled = false;
 
-- 
2.21.0


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic