* [PATCH v4 0/6] Add drive-strength in Meson pinctrl driver
@ 2019-05-09 16:28 Guillaume La Roque
2019-05-09 16:28 ` [PATCH v4 1/6] dt-bindings: pinctrl: add a 'drive-strength-microamp' property Guillaume La Roque
0 siblings, 1 reply; 4+ messages in thread
From: Guillaume La Roque @ 2019-05-09 16:28 UTC (permalink / raw)
To: linus.walleij, khilman
Cc: linux-gpio, devicetree, linux-amlogic, linux-kernel, jbrunet
The purpose of this patchset is to add drive-strength support in meson pinconf
driver. This is a new feature that was added on the g12a. It is critical for us
to support this since many functions are failing with default pad drive-strength.
The value achievable by the SoC are 0.5mA, 2.5mA, 3mA and 4mA and the DT property
'drive-strength' is expressed in mA.
So this patch add another generic property "drive-strength-uA". The change to do so
would be minimal and could be benefit to other platforms later on.
Cheers
Guillaume
Changes since v3:
- remove dev_err in meson_get_drive_strength
- cleanup code
Changes since v2:
- update driver-strength-uA property to be compliant with DT documentation
- rework patch series for better understanding
- rework set_bias function
Changes since v1:
- fix missing break
- implement new pinctrl generic property "drive-strength-uA"
[1] https://lkml.kernel.org/r/20190314163725.7918-1-jbrunet@baylibre.com
Guillaume La Roque (6):
dt-bindings: pinctrl: add a 'drive-strength-microamp' property
pinctrl: generic: add new 'drive-strength-microamp' property support
dt-bindings: pinctrl: meson: Add drive-strength-microamp property
pinctrl: meson: Rework enable/disable bias part
pinctrl: meson: add support of drive-strength-microamp
pinctrl: meson: g12a: add DS bank value
.../bindings/pinctrl/meson,pinctrl.txt | 4 +
.../bindings/pinctrl/pinctrl-bindings.txt | 3 +
drivers/pinctrl/meson/pinctrl-meson-g12a.c | 36 ++--
drivers/pinctrl/meson/pinctrl-meson.c | 180 ++++++++++++++----
drivers/pinctrl/meson/pinctrl-meson.h | 18 +-
drivers/pinctrl/pinconf-generic.c | 2 +
include/linux/pinctrl/pinconf-generic.h | 3 +
7 files changed, 193 insertions(+), 53 deletions(-)
--
2.17.1
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 4+ messages in thread
* [PATCH v4 1/6] dt-bindings: pinctrl: add a 'drive-strength-microamp' property
2019-05-09 16:28 [PATCH v4 0/6] Add drive-strength in Meson pinctrl driver Guillaume La Roque
@ 2019-05-09 16:28 ` Guillaume La Roque
0 siblings, 0 replies; 4+ messages in thread
From: Guillaume La Roque @ 2019-05-09 16:28 UTC (permalink / raw)
To: linus.walleij, khilman
Cc: linux-gpio, devicetree, linux-amlogic, linux-kernel, jbrunet
This property allow drive-strength parameter in uA instead of mA.
Signed-off-by: Guillaume La Roque <glaroque@baylibre.com>
---
Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt | 3 +++
1 file changed, 3 insertions(+)
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
index cef2b5855d60..84adce9f2a75 100644
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
@@ -258,6 +258,7 @@ drive-push-pull - drive actively high and low
drive-open-drain - drive with open drain
drive-open-source - drive with open source
drive-strength - sink or source at most X mA
+drive-strength-microamp - sink or source at most X uA
input-enable - enable input on pin (no effect on output, such as
enabling an input buffer)
input-disable - disable input on pin (no effect on output, such as
@@ -326,6 +327,8 @@ arguments are described below.
- drive-strength takes as argument the target strength in mA.
+- drive-strength-uA takes as argument the target strength in uA.
+
- input-debounce takes the debounce time in usec as argument
or 0 to disable debouncing
--
2.17.1
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH v4 0/6] Add drive-strength in Meson pinctrl driver
2019-05-09 16:29 [PATCH v4 0/6] Add drive-strength in Meson pinctrl driver Guillaume La Roque
@ 2019-05-09 17:34 ` Kevin Hilman
0 siblings, 0 replies; 4+ messages in thread
From: Kevin Hilman @ 2019-05-09 17:34 UTC (permalink / raw)
To: Guillaume La Roque, linus.walleij
Cc: linux-gpio, devicetree, linux-amlogic, linux-kernel, jbrunet
Guillaume La Roque <glaroque@baylibre.com> writes:
> The purpose of this patchset is to add drive-strength support in meson pinconf
> driver. This is a new feature that was added on the g12a. It is critical for us
> to support this since many functions are failing with default pad drive-strength.
>
> The value achievable by the SoC are 0.5mA, 2.5mA, 3mA and 4mA and the DT property
> 'drive-strength' is expressed in mA.
> So this patch add another generic property "drive-strength-uA". The change to do so
Looks like you forgot to update the cover letter.
The new property in this series is actually named
"drive-strengh-micromap"
> would be minimal and could be benefit to other platforms later on.
>
> Cheers
> Guillaume
>
> Changes since v3:
> - remove dev_err in meson_get_drive_strength
> - cleanup code
You didn't mention the property rename.
Kevin
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 4+ messages in thread
* [PATCH v4 0/6] Add drive-strength in Meson pinctrl driver
@ 2019-05-09 16:29 Guillaume La Roque
2019-05-09 17:34 ` Kevin Hilman
0 siblings, 1 reply; 4+ messages in thread
From: Guillaume La Roque @ 2019-05-09 16:29 UTC (permalink / raw)
To: linus.walleij, khilman
Cc: linux-gpio, devicetree, linux-amlogic, linux-kernel, jbrunet
The purpose of this patchset is to add drive-strength support in meson pinconf
driver. This is a new feature that was added on the g12a. It is critical for us
to support this since many functions are failing with default pad drive-strength.
The value achievable by the SoC are 0.5mA, 2.5mA, 3mA and 4mA and the DT property
'drive-strength' is expressed in mA.
So this patch add another generic property "drive-strength-uA". The change to do so
would be minimal and could be benefit to other platforms later on.
Cheers
Guillaume
Changes since v3:
- remove dev_err in meson_get_drive_strength
- cleanup code
Changes since v2:
- update driver-strength-uA property to be compliant with DT documentation
- rework patch series for better understanding
- rework set_bias function
Changes since v1:
- fix missing break
- implement new pinctrl generic property "drive-strength-uA"
[1] https://lkml.kernel.org/r/20190314163725.7918-1-jbrunet@baylibre.com
Guillaume La Roque (6):
dt-bindings: pinctrl: add a 'drive-strength-microamp' property
pinctrl: generic: add new 'drive-strength-microamp' property support
dt-bindings: pinctrl: meson: Add drive-strength-microamp property
pinctrl: meson: Rework enable/disable bias part
pinctrl: meson: add support of drive-strength-microamp
pinctrl: meson: g12a: add DS bank value
.../bindings/pinctrl/meson,pinctrl.txt | 4 +
.../bindings/pinctrl/pinctrl-bindings.txt | 3 +
drivers/pinctrl/meson/pinctrl-meson-g12a.c | 36 ++--
drivers/pinctrl/meson/pinctrl-meson.c | 180 ++++++++++++++----
drivers/pinctrl/meson/pinctrl-meson.h | 18 +-
drivers/pinctrl/pinconf-generic.c | 2 +
include/linux/pinctrl/pinconf-generic.h | 3 +
7 files changed, 193 insertions(+), 53 deletions(-)
--
2.17.1
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2019-05-09 17:34 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-05-09 16:28 [PATCH v4 0/6] Add drive-strength in Meson pinctrl driver Guillaume La Roque
2019-05-09 16:28 ` [PATCH v4 1/6] dt-bindings: pinctrl: add a 'drive-strength-microamp' property Guillaume La Roque
2019-05-09 16:29 [PATCH v4 0/6] Add drive-strength in Meson pinctrl driver Guillaume La Roque
2019-05-09 17:34 ` Kevin Hilman
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).