linux-amlogic.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Guillaume La Roque <glaroque@baylibre.com>
To: linus.walleij@linaro.org, khilman@baylibre.com
Cc: linux-gpio@vger.kernel.org, devicetree@vger.kernel.org,
	linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org,
	jbrunet@baylibre.com
Subject: [PATCH v4 6/6] pinctrl: meson: g12a: add DS bank value
Date: Thu,  9 May 2019 18:29:20 +0200	[thread overview]
Message-ID: <20190509162920.7054-7-glaroque@baylibre.com> (raw)
In-Reply-To: <20190509162920.7054-1-glaroque@baylibre.com>

add drive-strength bank regiter and bit value for G12A SoC

Signed-off-by: Guillaume La Roque <glaroque@baylibre.com>
---
 drivers/pinctrl/meson/pinctrl-meson-g12a.c | 36 +++++++++++-----------
 1 file changed, 18 insertions(+), 18 deletions(-)

diff --git a/drivers/pinctrl/meson/pinctrl-meson-g12a.c b/drivers/pinctrl/meson/pinctrl-meson-g12a.c
index d494492e98e9..3475cd7bd2af 100644
--- a/drivers/pinctrl/meson/pinctrl-meson-g12a.c
+++ b/drivers/pinctrl/meson/pinctrl-meson-g12a.c
@@ -1304,28 +1304,28 @@ static struct meson_pmx_func meson_g12a_aobus_functions[] = {
 };
 
 static struct meson_bank meson_g12a_periphs_banks[] = {
-	/* name  first  last  irq  pullen  pull  dir  out  in */
-	BANK("Z",    GPIOZ_0,    GPIOZ_15, 12, 27,
-	     4,  0,  4,  0,  12,  0,  13, 0,  14, 0),
-	BANK("H",    GPIOH_0,    GPIOH_8, 28, 36,
-	     3,  0,  3,  0,  9,  0,  10,  0,  11,  0),
-	BANK("BOOT", BOOT_0,     BOOT_15,  37, 52,
-	     0,  0,  0,  0,  0, 0,  1, 0,  2, 0),
-	BANK("C",    GPIOC_0,    GPIOC_7,  53, 60,
-	     1,  0,  1,  0,  3, 0,  4, 0,  5, 0),
-	BANK("A",    GPIOA_0,    GPIOA_15,  61, 76,
-	     5,  0,  5,  0,  16,  0,  17,  0,  18,  0),
-	BANK("X",    GPIOX_0,    GPIOX_19,   77, 96,
-	     2,  0,  2,  0,  6,  0,  7,  0,  8,  0),
+	/* name  first  last  irq  pullen  pull  dir  out  in  ds */
+	BANK_DS("Z",    GPIOZ_0,    GPIOZ_15, 12, 27,
+		4,  0,  4,  0,  12,  0,  13, 0,  14, 0, 5, 0),
+	BANK_DS("H",    GPIOH_0,    GPIOH_8, 28, 36,
+		3,  0,  3,  0,  9,  0,  10,  0,  11,  0, 4, 0),
+	BANK_DS("BOOT", BOOT_0,     BOOT_15,  37, 52,
+		0,  0,  0,  0,  0, 0,  1, 0,  2, 0, 0, 0),
+	BANK_DS("C",    GPIOC_0,    GPIOC_7,  53, 60,
+		1,  0,  1,  0,  3, 0,  4, 0,  5, 0, 1, 0),
+	BANK_DS("A",    GPIOA_0,    GPIOA_15,  61, 76,
+		5,  0,  5,  0,  16,  0,  17,  0,  18,  0, 6, 0),
+	BANK_DS("X",    GPIOX_0,    GPIOX_19,   77, 96,
+		2,  0,  2,  0,  6,  0,  7,  0,  8,  0, 2, 0),
 };
 
 static struct meson_bank meson_g12a_aobus_banks[] = {
-	/* name  first  last  irq  pullen  pull  dir  out  in  */
-	BANK("AO",   GPIOAO_0,  GPIOAO_11,  0, 11,
-	     3,  0,  2, 0,  0,  0,  4, 0,  1,  0),
+	/* name  first  last  irq  pullen  pull  dir  out  in  ds */
+	BANK_DS("AO", GPIOAO_0, GPIOAO_11, 0, 11, 3, 0, 2, 0, 0, 0, 4, 0, 1, 0,
+		0, 0),
 	/* GPIOE actually located in the AO bank */
-	BANK("E",   GPIOE_0,  GPIOE_2,   97, 99,
-	     3,  16,  2, 16,  0,  16,  4, 16,  1,  16),
+	BANK_DS("E", GPIOE_0, GPIOE_2, 97, 99, 3, 16, 2, 16, 0, 16, 4, 16, 1,
+		16, 1, 0),
 };
 
 static struct meson_pmx_bank meson_g12a_periphs_pmx_banks[] = {
-- 
2.17.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

  parent reply	other threads:[~2019-05-09 16:29 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-09 16:29 [PATCH v4 0/6] Add drive-strength in Meson pinctrl driver Guillaume La Roque
2019-05-09 16:29 ` [PATCH v4 1/6] dt-bindings: pinctrl: add a 'drive-strength-microamp' property Guillaume La Roque
2019-05-09 17:35   ` Kevin Hilman
2019-05-09 16:29 ` [PATCH v4 2/6] pinctrl: generic: add new 'drive-strength-microamp' property support Guillaume La Roque
2019-05-09 16:29 ` [PATCH v4 3/6] dt-bindings: pinctrl: meson: Add drive-strength-microamp property Guillaume La Roque
2019-05-09 16:29 ` [PATCH v4 4/6] pinctrl: meson: Rework enable/disable bias part Guillaume La Roque
2019-05-09 16:29 ` [PATCH v4 5/6] pinctrl: meson: add support of drive-strength-microamp Guillaume La Roque
2019-05-09 16:29 ` Guillaume La Roque [this message]
2019-05-09 17:34 ` [PATCH v4 0/6] Add drive-strength in Meson pinctrl driver Kevin Hilman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190509162920.7054-7-glaroque@baylibre.com \
    --to=glaroque@baylibre.com \
    --cc=devicetree@vger.kernel.org \
    --cc=jbrunet@baylibre.com \
    --cc=khilman@baylibre.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).