Linux-Amlogic Archive on
 help / color / Atom feed
* [PATCH/RFT] arm64: dts: meson: odroid-c2: add missing mmc modes
@ 2019-05-13 13:26 Jerome Brunet
  0 siblings, 0 replies; only message in thread
From: Jerome Brunet @ 2019-05-13 13:26 UTC (permalink / raw)
  To: Kevin Hilman; +Cc: devicetree, linux-amlogic, linux-kernel, Jerome Brunet

Add sdcard uhs modes up to DDR50 and push eMMC up to 200Mhz
With the new tuning method, these modes appear to be stable

Signed-off-by: Jerome Brunet <>

 This particular board has always been painful when it comes to
 its eMMC modules. While testing the new tuning method introduced
 in the last cycle, I have not seen any issue with HS200@200Mhz.
 That being said, I only have the 16GB module.

 In the past, problems have been reported with other modules while
 it was fine on the one I have. Clearly, I don't have the full

 Kevin, I don't know how you prefer to proceed. I am personally in
 no rush to see this applied. I'm sending this mainly to make sure
 it is shared and give people a chance to report issues.

 arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
index 1cc9dc68ef00..5a139e7b1c60 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
@@ -255,6 +255,10 @@
 	bus-width = <4>;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-ddr50;
 	max-frequency = <100000000>;
@@ -272,7 +276,7 @@
 	pinctrl-names = "default", "clk-gate";
 	bus-width = <8>;
-	max-frequency = <100000000>;
+	max-frequency = <200000000>;

linux-amlogic mailing list

^ permalink raw reply	[flat|nested] only message in thread

only message in thread, back to index

Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-05-13 13:26 [PATCH/RFT] arm64: dts: meson: odroid-c2: add missing mmc modes Jerome Brunet

Linux-Amlogic Archive on

Archives are clonable:
	git clone --mirror linux-amlogic/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-amlogic linux-amlogic/ \
	public-inbox-index linux-amlogic

Newsgroup available over NNTP:

AGPL code for this site: git clone public-inbox