From: Guillaume La Roque <glaroque@baylibre.com>
To: linus.walleij@linaro.org, khilman@baylibre.com
Cc: linux-gpio@vger.kernel.org, devicetree@vger.kernel.org,
linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org,
jbrunet@baylibre.com
Subject: [PATCH v6 4/6] pinctrl: meson: Rework enable/disable bias part
Date: Tue, 14 May 2019 10:26:50 +0200 [thread overview]
Message-ID: <20190514082652.20686-5-glaroque@baylibre.com> (raw)
In-Reply-To: <20190514082652.20686-1-glaroque@baylibre.com>
rework bias enable/disable part to prepare drive-strength integration
no functional changes
Signed-off-by: Guillaume La Roque <glaroque@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
drivers/pinctrl/meson/pinctrl-meson.c | 85 +++++++++++++++------------
1 file changed, 49 insertions(+), 36 deletions(-)
diff --git a/drivers/pinctrl/meson/pinctrl-meson.c b/drivers/pinctrl/meson/pinctrl-meson.c
index 96a4a72708e4..8ea5c1527064 100644
--- a/drivers/pinctrl/meson/pinctrl-meson.c
+++ b/drivers/pinctrl/meson/pinctrl-meson.c
@@ -174,62 +174,75 @@ int meson_pmx_get_groups(struct pinctrl_dev *pcdev, unsigned selector,
return 0;
}
-static int meson_pinconf_set(struct pinctrl_dev *pcdev, unsigned int pin,
- unsigned long *configs, unsigned num_configs)
+static int meson_pinconf_disable_bias(struct meson_pinctrl *pc,
+ unsigned int pin)
{
- struct meson_pinctrl *pc = pinctrl_dev_get_drvdata(pcdev);
struct meson_bank *bank;
- enum pin_config_param param;
- unsigned int reg, bit;
- int i, ret;
+ unsigned int reg, bit = 0;
+ int ret;
ret = meson_get_bank(pc, pin, &bank);
if (ret)
return ret;
+ meson_calc_reg_and_bit(bank, pin, REG_PULLEN, ®, &bit);
+ ret = regmap_update_bits(pc->reg_pullen, reg, BIT(bit), 0);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int meson_pinconf_enable_bias(struct meson_pinctrl *pc, unsigned int pin,
+ bool pull_up)
+{
+ struct meson_bank *bank;
+ unsigned int reg, bit, val = 0;
+ int ret;
+
+ ret = meson_get_bank(pc, pin, &bank);
+ if (ret)
+ return ret;
+
+ meson_calc_reg_and_bit(bank, pin, REG_PULL, ®, &bit);
+ if (pull_up)
+ val = BIT(bit);
+
+ ret = regmap_update_bits(pc->reg_pull, reg, BIT(bit), val);
+ if (ret)
+ return ret;
+
+ meson_calc_reg_and_bit(bank, pin, REG_PULLEN, ®, &bit);
+ ret = regmap_update_bits(pc->reg_pullen, reg, BIT(bit), BIT(bit));
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int meson_pinconf_set(struct pinctrl_dev *pcdev, unsigned int pin,
+ unsigned long *configs, unsigned num_configs)
+{
+ struct meson_pinctrl *pc = pinctrl_dev_get_drvdata(pcdev);
+ enum pin_config_param param;
+ int i, ret;
+
for (i = 0; i < num_configs; i++) {
param = pinconf_to_config_param(configs[i]);
switch (param) {
case PIN_CONFIG_BIAS_DISABLE:
- dev_dbg(pc->dev, "pin %u: disable bias\n", pin);
-
- meson_calc_reg_and_bit(bank, pin, REG_PULLEN, ®,
- &bit);
- ret = regmap_update_bits(pc->reg_pullen, reg,
- BIT(bit), 0);
+ ret = meson_pinconf_disable_bias(pc, pin);
if (ret)
return ret;
break;
case PIN_CONFIG_BIAS_PULL_UP:
- dev_dbg(pc->dev, "pin %u: enable pull-up\n", pin);
-
- meson_calc_reg_and_bit(bank, pin, REG_PULLEN,
- ®, &bit);
- ret = regmap_update_bits(pc->reg_pullen, reg,
- BIT(bit), BIT(bit));
- if (ret)
- return ret;
-
- meson_calc_reg_and_bit(bank, pin, REG_PULL, ®, &bit);
- ret = regmap_update_bits(pc->reg_pull, reg,
- BIT(bit), BIT(bit));
+ ret = meson_pinconf_enable_bias(pc, pin, true);
if (ret)
return ret;
break;
case PIN_CONFIG_BIAS_PULL_DOWN:
- dev_dbg(pc->dev, "pin %u: enable pull-down\n", pin);
-
- meson_calc_reg_and_bit(bank, pin, REG_PULLEN,
- ®, &bit);
- ret = regmap_update_bits(pc->reg_pullen, reg,
- BIT(bit), BIT(bit));
- if (ret)
- return ret;
-
- meson_calc_reg_and_bit(bank, pin, REG_PULL, ®, &bit);
- ret = regmap_update_bits(pc->reg_pull, reg,
- BIT(bit), 0);
+ ret = meson_pinconf_enable_bias(pc, pin, false);
if (ret)
return ret;
break;
--
2.17.1
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
next prev parent reply other threads:[~2019-05-14 8:27 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-14 8:26 [PATCH v6 0/6] Add drive-strength in Meson pinctrl driver Guillaume La Roque
2019-05-14 8:26 ` [PATCH v6 1/6] dt-bindings: pinctrl: add a 'drive-strength-microamp' property Guillaume La Roque
2019-05-14 8:26 ` [PATCH v6 2/6] pinctrl: generic: add new 'drive-strength-microamp' property support Guillaume La Roque
2019-05-14 8:26 ` [PATCH v6 3/6] dt-bindings: pinctrl: meson: Add drive-strength-microamp property Guillaume La Roque
2019-05-14 8:26 ` Guillaume La Roque [this message]
2019-05-14 8:26 ` [PATCH v6 5/6] pinctrl: meson: add support of drive-strength-microamp Guillaume La Roque
2019-05-14 8:26 ` [PATCH v6 6/6] pinctrl: meson: g12a: add DS bank value Guillaume La Roque
2019-05-16 12:52 ` [PATCH v6 0/6] Add drive-strength in Meson pinctrl driver Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190514082652.20686-5-glaroque@baylibre.com \
--to=glaroque@baylibre.com \
--cc=devicetree@vger.kernel.org \
--cc=jbrunet@baylibre.com \
--cc=khilman@baylibre.com \
--cc=linus.walleij@linaro.org \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).