Linux-Amlogic Archive on lore.kernel.org
 help / color / Atom feed
From: Jerome Brunet <jbrunet@baylibre.com>
To: Kevin Hilman <khilman@baylibre.com>
Cc: devicetree@vger.kernel.org, linux-amlogic@lists.infradead.org,
	linux-kernel@vger.kernel.org,
	Jerome Brunet <jbrunet@baylibre.com>
Subject: [PATCH 0/3] arm64: dts: meson: g12a: add i2c
Date: Tue, 14 May 2019 12:12:34 +0200
Message-ID: <20190514101237.13969-1-jbrunet@baylibre.com> (raw)

Add the i2c controllers and pinctrl definitions to the g12a DT then
the busses present on the u200 and sei510.

Notice the use of the pinconf DT property 'drive-strength-microamp'.
Support for this property is not yet merged in meson pinctrl driver but
the DT part as been acked by the DT maintainer [0] so it should be safe
to use.

[0]: https://lkml.kernel.org/r/20190513152451.GA25690@bogus

Guillaume La Roque (1):
  arm64: dts: meson: g12a: add i2c nodes

Jerome Brunet (2):
  arm64: dts: meson: u200: enable i2c busses
  arm64: dts: meson: sei510: enable i2c3

 .../boot/dts/amlogic/meson-g12a-sei510.dts    |   6 +
 .../boot/dts/amlogic/meson-g12a-u200.dts      |  21 ++
 arch/arm64/boot/dts/amlogic/meson-g12a.dtsi   | 268 ++++++++++++++++++
 3 files changed, 295 insertions(+)

-- 
2.20.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

             reply index

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-14 10:12 Jerome Brunet [this message]
2019-05-14 10:12 ` [PATCH 1/3] arm64: dts: meson: g12a: add i2c nodes Jerome Brunet
2019-05-14 10:12 ` [PATCH 2/3] arm64: dts: meson: u200: enable i2c busses Jerome Brunet
2019-05-14 10:12 ` [PATCH 3/3] arm64: dts: meson: sei510: enable i2c3 Jerome Brunet
2019-05-20 21:14 ` [PATCH 0/3] arm64: dts: meson: g12a: add i2c Kevin Hilman

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190514101237.13969-1-jbrunet@baylibre.com \
    --to=jbrunet@baylibre.com \
    --cc=devicetree@vger.kernel.org \
    --cc=khilman@baylibre.com \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-Amlogic Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-amlogic/0 linux-amlogic/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-amlogic linux-amlogic/ https://lore.kernel.org/linux-amlogic \
		linux-amlogic@lists.infradead.org linux-amlogic@archiver.kernel.org
	public-inbox-index linux-amlogic


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-amlogic


AGPL code for this site: git clone https://public-inbox.org/ public-inbox