Linux-Amlogic Archive on lore.kernel.org
 help / color / Atom feed
From: Jerome Brunet <jbrunet@baylibre.com>
To: Kevin Hilman <khilman@baylibre.com>
Cc: devicetree@vger.kernel.org, Jerome Brunet <jbrunet@baylibre.com>,
	Guillaume La Roque <glaroque@baylibre.com>,
	linux-kernel@vger.kernel.org, linux-amlogic@lists.infradead.org
Subject: [PATCH 1/3] arm64: dts: meson: g12a: add i2c nodes
Date: Tue, 14 May 2019 12:12:35 +0200
Message-ID: <20190514101237.13969-2-jbrunet@baylibre.com> (raw)
In-Reply-To: <20190514101237.13969-1-jbrunet@baylibre.com>

From: Guillaume La Roque <glaroque@baylibre.com>

Add pinctrl and nodes for i2c support on amlogic g12a

Signed-off-by: Guillaume La Roque <glaroque@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
 arch/arm64/boot/dts/amlogic/meson-g12a.dtsi | 268 ++++++++++++++++++++
 1 file changed, 268 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
index ca01064a771a..e6c0c19b3223 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
@@ -244,6 +244,188 @@
 						};
 					};
 
+
+					i2c0_sda_c_pins: i2c0-sda-c {
+						mux {
+							groups = "i2c0_sda_c";
+							function = "i2c0";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+
+						};
+					};
+
+					i2c0_sck_c_pins: i2c0-sck-c {
+						mux {
+							groups = "i2c0_sck_c";
+							function = "i2c0";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					i2c0_sda_z0_pins: i2c0-sda-z0 {
+						mux {
+							groups = "i2c0_sda_z0";
+							function = "i2c0";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					i2c0_sck_z1_pins: i2c0-sck-z1 {
+						mux {
+							groups = "i2c0_sck_z1";
+							function = "i2c0";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					i2c0_sda_z7_pins: i2c0-sda-z7 {
+						mux {
+							groups = "i2c0_sda_z7";
+							function = "i2c0";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					i2c0_sda_z8_pins: i2c0-sda-z8 {
+						mux {
+							groups = "i2c0_sda_z8";
+							function = "i2c0";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					i2c1_sda_x_pins: i2c1-sda-x {
+						mux {
+							groups = "i2c1_sda_x";
+							function = "i2c1";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					i2c1_sck_x_pins: i2c1-sck-x {
+						mux {
+							groups = "i2c1_sck_x";
+							function = "i2c1";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					i2c1_sda_h2_pins: i2c1-sda-h2 {
+						mux {
+							groups = "i2c1_sda_h2";
+							function = "i2c1";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					i2c1_sck_h3_pins: i2c1-sck-h3 {
+						mux {
+							groups = "i2c1_sck_h3";
+							function = "i2c1";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					i2c1_sda_h6_pins: i2c1-sda-h6 {
+						mux {
+							groups = "i2c1_sda_h6";
+							function = "i2c1";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					i2c1_sck_h7_pins: i2c1-sck-h7 {
+						mux {
+							groups = "i2c1_sck_h7";
+							function = "i2c1";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					i2c2_sda_x_pins: i2c2-sda-x {
+						mux {
+							groups = "i2c2_sda_x";
+							function = "i2c2";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					i2c2_sck_x_pins: i2c2-sck-x {
+						mux {
+							groups = "i2c2_sck_x";
+							function = "i2c2";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					i2c2_sda_z_pins: i2c2-sda-z {
+						mux {
+							groups = "i2c2_sda_z";
+							function = "i2c2";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					i2c2_sck_z_pins: i2c2-sck-z {
+						mux {
+							groups = "i2c2_sck_z";
+							function = "i2c2";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					i2c3_sda_h_pins: i2c3-sda-h {
+						mux {
+							groups = "i2c3_sda_h";
+							function = "i2c3";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					i2c3_sck_h_pins: i2c3-sck-h {
+						mux {
+							groups = "i2c3_sck_h";
+							function = "i2c3";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					i2c3_sda_a_pins: i2c3-sda-a {
+						mux {
+							groups = "i2c3_sda_a";
+							function = "i2c3";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					i2c3_sck_a_pins: i2c3-sck-a {
+						mux {
+							groups = "i2c3_sck_a";
+							function = "i2c3";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
 					pwm_a_pins: pwm-a {
 						mux {
 							groups = "pwm_a";
@@ -589,6 +771,42 @@
 						gpio-ranges = <&ao_pinctrl 0 0 15>;
 					};
 
+					i2c_ao_sck_pins: i2c_ao_sck_pins {
+						mux {
+							groups = "i2c_ao_sck";
+							function = "i2c_ao";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					i2c_ao_sda_pins: i2c_ao_sda {
+						mux {
+							groups = "i2c_ao_sda";
+							function = "i2c_ao";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					i2c_ao_sck_e_pins: i2c_ao_sck_e {
+						mux {
+							groups = "i2c_ao_sck_e";
+							function = "i2c_ao";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					i2c_ao_sda_e_pins: i2c_ao_sda_e {
+						mux {
+							groups = "i2c_ao_sda_e";
+							function = "i2c_ao";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
 					uart_ao_a_pins: uart-a-ao {
 						mux {
 							groups = "uart_ao_a_tx",
@@ -723,6 +941,16 @@
 				status = "disabled";
 			};
 
+			i2c_AO: i2c@5000 {
+				compatible = "amlogic,meson-axg-i2c";
+				status = "disabled";
+				reg = <0x0 0x05000 0x0 0x20>;
+				interrupts = <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&clkc CLKID_I2C>;
+			};
+
 			pwm_AO_ab: pwm@7000 {
 				compatible = "amlogic,meson-g12a-ao-pwm-ab";
 				reg = <0x0 0x7000 0x0 0x20>;
@@ -826,6 +1054,46 @@
 				status = "disabled";
 			};
 
+			i2c3: i2c@1c000 {
+				compatible = "amlogic,meson-axg-i2c";
+				status = "disabled";
+				reg = <0x0 0x1c000 0x0 0x20>;
+				interrupts = <GIC_SPI 39 IRQ_TYPE_EDGE_RISING>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&clkc CLKID_I2C>;
+			};
+
+			i2c2: i2c@1d000 {
+				compatible = "amlogic,meson-axg-i2c";
+				status = "disabled";
+				reg = <0x0 0x1d000 0x0 0x20>;
+				interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&clkc CLKID_I2C>;
+			};
+
+			i2c1: i2c@1e000 {
+				compatible = "amlogic,meson-axg-i2c";
+				status = "disabled";
+				reg = <0x0 0x1e000 0x0 0x20>;
+				interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&clkc CLKID_I2C>;
+			};
+
+			i2c0: i2c@1f000 {
+				compatible = "amlogic,meson-axg-i2c";
+				status = "disabled";
+				reg = <0x0 0x1f000 0x0 0x20>;
+				interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&clkc CLKID_I2C>;
+			};
+
 			clk_msr: clock-measure@18000 {
 				compatible = "amlogic,meson-g12a-clk-measure";
 				reg = <0x0 0x18000 0x0 0x10>;
-- 
2.20.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

  reply index

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-14 10:12 [PATCH 0/3] arm64: dts: meson: g12a: add i2c Jerome Brunet
2019-05-14 10:12 ` Jerome Brunet [this message]
2019-05-14 10:12 ` [PATCH 2/3] arm64: dts: meson: u200: enable i2c busses Jerome Brunet
2019-05-14 10:12 ` [PATCH 3/3] arm64: dts: meson: sei510: enable i2c3 Jerome Brunet
2019-05-20 21:14 ` [PATCH 0/3] arm64: dts: meson: g12a: add i2c Kevin Hilman

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190514101237.13969-2-jbrunet@baylibre.com \
    --to=jbrunet@baylibre.com \
    --cc=devicetree@vger.kernel.org \
    --cc=glaroque@baylibre.com \
    --cc=khilman@baylibre.com \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-Amlogic Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-amlogic/0 linux-amlogic/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-amlogic linux-amlogic/ https://lore.kernel.org/linux-amlogic \
		linux-amlogic@lists.infradead.org linux-amlogic@archiver.kernel.org
	public-inbox-index linux-amlogic


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-amlogic


AGPL code for this site: git clone https://public-inbox.org/ public-inbox