[PATCH 0/8] arm64: dts: meson: g12a: add audio devices

[PATCH 0/8] arm64: dts: meson: g12a: add audio devices

[Jerome Brunet]

This patchset adds audio related devices to g12a SoC family.
It adds the clock controller as well as the memory, tdm, spdif
and pdm interfaces.

At this stage, the HDMI and internal audio DAC are still missing.

Notice the use of the pinconf DT property 'drive-strength-microamp'.
Support for this property is not yet merged in meson pinctrl driver but
the DT part as been acked by the DT maintainer [0] so it should be safe
to use.

[0]: https://lkml.kernel.org/r/20190513152451.GA25690@bogus

Jerome Brunet (8):
  arm64: dts: meson: g12a: add audio clock controller
  arm64: dts: meson: g12a: add audio memory arbitrer
  arm64: dts: meson: g12a: add audio fifos
  arm64: dts: meson: g12a: add tdm
  arm64: dts: meson: g12a: add spdifouts
  arm64: dts: meson: g12a: add pdm
  arm64: dts: meson: g12a: add spdifin
  arm64: dts: meson: g12a: enable hdmi_tx sound dai provider

 arch/arm64/boot/dts/amlogic/meson-g12a.dtsi | 1227 +++++++++++++++++--
 1 file changed, 1136 insertions(+), 91 deletions(-)

-- 
2.20.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH 1/8] arm64: dts: meson: g12a: add audio clock controller

[Jerome Brunet]

Add the g12a clock controller dedicated to audio.

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
 arch/arm64/boot/dts/amlogic/meson-g12a.dtsi | 36 +++++++++++++++++++++
 1 file changed, 36 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
index e6c0c19b3223..09aa024d9f0e 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
@@ -673,6 +673,42 @@
 				};
 			};
 
+			audio: bus@42000 {
+				compatible = "simple-bus";
+				reg = <0x0 0x42000 0x0 0x2000>;
+				#address-cells = <2>;
+				#size-cells = <2>;
+				ranges = <0x0 0x0 0x0 0x42000 0x0 0x2000>;
+
+				clkc_audio: clock-controller@0 {
+					status = "disabled";
+					compatible = "amlogic,g12a-audio-clkc";
+					reg = <0x0 0x0 0x0 0xb4>;
+					#clock-cells = <1>;
+
+					clocks = <&clkc CLKID_AUDIO>,
+						 <&clkc CLKID_MPLL0>,
+						 <&clkc CLKID_MPLL1>,
+						 <&clkc CLKID_MPLL2>,
+						 <&clkc CLKID_MPLL3>,
+						 <&clkc CLKID_HIFI_PLL>,
+						 <&clkc CLKID_FCLK_DIV3>,
+						 <&clkc CLKID_FCLK_DIV4>,
+						 <&clkc CLKID_GP0_PLL>;
+					clock-names = "pclk",
+						      "mst_in0",
+						      "mst_in1",
+						      "mst_in2",
+						      "mst_in3",
+						      "mst_in4",
+						      "mst_in5",
+						      "mst_in6",
+						      "mst_in7";
+
+					resets = <&reset RESET_AUDIO>;
+				};
+			};
+
 			usb3_pcie_phy: phy@46000 {
 				compatible = "amlogic,g12a-usb3-pcie-phy";
 				reg = <0x0 0x46000 0x0 0x2000>;
-- 
2.20.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH 2/8] arm64: dts: meson: g12a: add audio memory arbitrer

[Jerome Brunet]

Add the audio DDR memory arbitrer of the g12a SoC family.

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
 arch/arm64/boot/dts/amlogic/meson-g12a.dtsi | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
index 09aa024d9f0e..2d5bccad4035 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
@@ -5,6 +5,7 @@
 
 #include <dt-bindings/phy/phy.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/axg-audio-clkc.h>
 #include <dt-bindings/clock/g12a-clkc.h>
 #include <dt-bindings/clock/g12a-aoclkc.h>
 #include <dt-bindings/interrupt-controller/irq.h>
@@ -707,6 +708,14 @@
 
 					resets = <&reset RESET_AUDIO>;
 				};
+
+				arb: reset-controller@280 {
+					status = "disabled";
+					compatible = "amlogic,meson-axg-audio-arb";
+					reg = <0x0 0x280 0x0 0x4>;
+					#reset-cells = <1>;
+					clocks = <&clkc_audio AUD_CLKID_DDR_ARB>;
+				};
 			};
 
 			usb3_pcie_phy: phy@46000 {
-- 
2.20.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH 3/8] arm64: dts: meson: g12a: add audio fifos

[Jerome Brunet]

Add the playback and capture memory interfaces of the g12a SoC family.

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
 arch/arm64/boot/dts/amlogic/meson-g12a.dtsi | 67 +++++++++++++++++++++
 1 file changed, 67 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
index 2d5bccad4035..299df8131a0c 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
@@ -10,6 +10,7 @@
 #include <dt-bindings/clock/g12a-aoclkc.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset/amlogic,meson-axg-audio-arb.h>
 #include <dt-bindings/reset/amlogic,meson-g12a-reset.h>
 
 / {
@@ -709,6 +710,72 @@
 					resets = <&reset RESET_AUDIO>;
 				};
 
+				toddr_a: audio-controller@100 {
+					compatible = "amlogic,g12a-toddr";
+					reg = <0x0 0x100 0x0 0x1c>;
+					#sound-dai-cells = <0>;
+					sound-name-prefix = "TODDR_A";
+					interrupts = <GIC_SPI 148 IRQ_TYPE_EDGE_RISING>;
+					clocks = <&clkc_audio AUD_CLKID_TODDR_A>;
+					resets = <&arb AXG_ARB_TODDR_A>;
+					status = "disabled";
+				};
+
+				toddr_b: audio-controller@140 {
+					compatible = "amlogic,g12a-toddr";
+					reg = <0x0 0x140 0x0 0x1c>;
+					#sound-dai-cells = <0>;
+					sound-name-prefix = "TODDR_B";
+					interrupts = <GIC_SPI 149 IRQ_TYPE_EDGE_RISING>;
+					clocks = <&clkc_audio AUD_CLKID_TODDR_B>;
+					resets = <&arb AXG_ARB_TODDR_B>;
+					status = "disabled";
+				};
+
+				toddr_c: audio-controller@180 {
+					compatible = "amlogic,g12a-toddr";
+					reg = <0x0 0x180 0x0 0x1c>;
+					#sound-dai-cells = <0>;
+					sound-name-prefix = "TODDR_C";
+					interrupts = <GIC_SPI 150 IRQ_TYPE_EDGE_RISING>;
+					clocks = <&clkc_audio AUD_CLKID_TODDR_C>;
+					resets = <&arb AXG_ARB_TODDR_C>;
+					status = "disabled";
+				};
+
+				frddr_a: audio-controller@1c0 {
+					compatible = "amlogic,g12a-frddr";
+					reg = <0x0 0x1c0 0x0 0x1c>;
+					#sound-dai-cells = <0>;
+					sound-name-prefix = "FRDDR_A";
+					interrupts = <GIC_SPI 152 IRQ_TYPE_EDGE_RISING>;
+					clocks = <&clkc_audio AUD_CLKID_FRDDR_A>;
+					resets = <&arb AXG_ARB_FRDDR_A>;
+					status = "disabled";
+				};
+
+				frddr_b: audio-controller@200 {
+					compatible = "amlogic,g12a-frddr";
+					reg = <0x0 0x200 0x0 0x1c>;
+					#sound-dai-cells = <0>;
+					sound-name-prefix = "FRDDR_B";
+					interrupts = <GIC_SPI 153 IRQ_TYPE_EDGE_RISING>;
+					clocks = <&clkc_audio AUD_CLKID_FRDDR_B>;
+					resets = <&arb AXG_ARB_FRDDR_B>;
+					status = "disabled";
+				};
+
+				frddr_c: audio-controller@240 {
+					compatible = "amlogic,g12a-frddr";
+					reg = <0x0 0x240 0x0 0x1c>;
+					#sound-dai-cells = <0>;
+					sound-name-prefix = "FRDDR_C";
+					interrupts = <GIC_SPI 154 IRQ_TYPE_EDGE_RISING>;
+					clocks = <&clkc_audio AUD_CLKID_FRDDR_C>;
+					resets = <&arb AXG_ARB_FRDDR_C>;
+					status = "disabled";
+				};
+
 				arb: reset-controller@280 {
 					status = "disabled";
 					compatible = "amlogic,meson-axg-audio-arb";
-- 
2.20.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH 4/8] arm64: dts: meson: g12a: add tdm

[Jerome Brunet]

Add the devices and pinctrl definitions for the tdm interfaces of
the g12a SoC family.

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
 arch/arm64/boot/dts/amlogic/meson-g12a.dtsi | 658 ++++++++++++++++++++
 1 file changed, 658 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
index 299df8131a0c..825e874918c2 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
@@ -20,6 +20,39 @@
 	#address-cells = <2>;
 	#size-cells = <2>;
 
+	tdmif_a: audio-controller-0 {
+		compatible = "amlogic,axg-tdm-iface";
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "TDM_A";
+		clocks = <&clkc_audio AUD_CLKID_MST_A_MCLK>,
+			 <&clkc_audio AUD_CLKID_MST_A_SCLK>,
+			 <&clkc_audio AUD_CLKID_MST_A_LRCLK>;
+		clock-names = "mclk", "sclk", "lrclk";
+		status = "disabled";
+	};
+
+	tdmif_b: audio-controller-1 {
+		compatible = "amlogic,axg-tdm-iface";
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "TDM_B";
+		clocks = <&clkc_audio AUD_CLKID_MST_B_MCLK>,
+			 <&clkc_audio AUD_CLKID_MST_B_SCLK>,
+			 <&clkc_audio AUD_CLKID_MST_B_LRCLK>;
+		clock-names = "mclk", "sclk", "lrclk";
+		status = "disabled";
+	};
+
+	tdmif_c: audio-controller-2 {
+		compatible = "amlogic,axg-tdm-iface";
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "TDM_C";
+		clocks = <&clkc_audio AUD_CLKID_MST_C_MCLK>,
+			 <&clkc_audio AUD_CLKID_MST_C_SCLK>,
+			 <&clkc_audio AUD_CLKID_MST_C_LRCLK>;
+		clock-names = "mclk", "sclk", "lrclk";
+		status = "disabled";
+	};
+
 	cpus {
 		#address-cells = <0x2>;
 		#size-cells = <0x0>;
@@ -428,6 +461,42 @@
 						};
 					};
 
+					mclk0_a_pins: mclk0_a {
+						mux {
+							groups = "mclk0_a";
+							function = "mclk0";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					mclk1_a_pins: mclk1_a {
+						mux {
+							groups = "mclk1_a";
+							function = "mclk1";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					mclk1_x_pins: mclk1_x {
+						mux {
+							groups = "mclk1_x";
+							function = "mclk1";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					mclk1_z_pins: mclk1_z {
+						mux {
+							groups = "mclk1_z";
+							function = "mclk1";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
 					pwm_a_pins: pwm-a {
 						mux {
 							groups = "pwm_a";
@@ -574,6 +643,399 @@
 						};
 					};
 
+					tdm_a_din0_pins: tdm-a-din0 {
+						mux {
+							groups = "tdm_a_din0";
+							function = "tdm_a";
+							bias-disable;
+						};
+					};
+
+
+					tdm_a_din1_pins: tdm-a-din1 {
+						mux {
+							groups = "tdm_a_din1";
+							function = "tdm_a";
+							bias-disable;
+						};
+					};
+
+					tdm_a_dout0_pins: tdm-a-dout0 {
+						mux {
+							groups = "tdm_a_dout0";
+							function = "tdm_a";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_a_dout1_pins: tdm-a-dout1 {
+						mux {
+							groups = "tdm_a_dout1";
+							function = "tdm_a";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_a_fs_pins: tdm-a-fs {
+						mux {
+							groups = "tdm_a_fs";
+							function = "tdm_a";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_a_sclk_pins: tdm-a-sclk {
+						mux {
+							groups = "tdm_a_sclk";
+							function = "tdm_a";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_a_slv_fs_pins: tdm-a-slv-fs {
+						mux {
+							groups = "tdm_a_slv_fs";
+							function = "tdm_a";
+							bias-disable;
+						};
+					};
+
+
+					tdm_a_slv_sclk_pins: tdm-a-slv-sclk {
+						mux {
+							groups = "tdm_a_slv_sclk";
+							function = "tdm_a";
+							bias-disable;
+						};
+					};
+
+					tdm_b_din0_pins: tdm-b-din0 {
+						mux {
+							groups = "tdm_b_din0";
+							function = "tdm_b";
+							bias-disable;
+						};
+					};
+
+					tdm_b_din1_pins: tdm-b-din1 {
+						mux {
+							groups = "tdm_b_din1";
+							function = "tdm_b";
+							bias-disable;
+						};
+					};
+
+					tdm_b_din2_pins: tdm-b-din2 {
+						mux {
+							groups = "tdm_b_din2";
+							function = "tdm_b";
+							bias-disable;
+						};
+					};
+
+					tdm_b_din3_a_pins: tdm-b-din3-a {
+						mux {
+							groups = "tdm_b_din3_a";
+							function = "tdm_b";
+							bias-disable;
+						};
+					};
+
+					tdm_b_din3_h_pins: tdm-b-din3-h {
+						mux {
+							groups = "tdm_b_din3_h";
+							function = "tdm_b";
+							bias-disable;
+						};
+					};
+
+					tdm_b_dout0_pins: tdm-b-dout0 {
+						mux {
+							groups = "tdm_b_dout0";
+							function = "tdm_b";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_b_dout1_pins: tdm-b-dout1 {
+						mux {
+							groups = "tdm_b_dout1";
+							function = "tdm_b";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_b_dout2_pins: tdm-b-dout2 {
+						mux {
+							groups = "tdm_b_dout2";
+							function = "tdm_b";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_b_dout3_a_pins: tdm-b-dout3-a {
+						mux {
+							groups = "tdm_b_dout3_a";
+							function = "tdm_b";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_b_dout3_h_pins: tdm-b-dout3-h {
+						mux {
+							groups = "tdm_b_dout3_h";
+							function = "tdm_b";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_b_fs_pins: tdm-b-fs {
+						mux {
+							groups = "tdm_b_fs";
+							function = "tdm_b";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_b_sclk_pins: tdm-b-sclk {
+						mux {
+							groups = "tdm_b_sclk";
+							function = "tdm_b";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_b_slv_fs_pins: tdm-b-slv-fs {
+						mux {
+							groups = "tdm_b_slv_fs";
+							function = "tdm_b";
+							bias-disable;
+						};
+					};
+
+					tdm_b_slv_sclk_pins: tdm-b-slv-sclk {
+						mux {
+							groups = "tdm_b_slv_sclk";
+							function = "tdm_b";
+							bias-disable;
+						};
+					};
+
+					tdm_c_din0_a_pins: tdm-c-din0-a {
+						mux {
+							groups = "tdm_c_din0_a";
+							function = "tdm_c";
+							bias-disable;
+						};
+					};
+
+					tdm_c_din0_z_pins: tdm-c-din0-z {
+						mux {
+							groups = "tdm_c_din0_z";
+							function = "tdm_c";
+							bias-disable;
+						};
+					};
+
+					tdm_c_din1_a_pins: tdm-c-din1-a {
+						mux {
+							groups = "tdm_c_din1_a";
+							function = "tdm_c";
+							bias-disable;
+						};
+					};
+
+					tdm_c_din1_z_pins: tdm-c-din1-z {
+						mux {
+							groups = "tdm_c_din1_z";
+							function = "tdm_c";
+							bias-disable;
+						};
+					};
+
+					tdm_c_din2_a_pins: tdm-c-din2-a {
+						mux {
+							groups = "tdm_c_din2_a";
+							function = "tdm_c";
+							bias-disable;
+						};
+					};
+
+					tdm_c_din2_z_pins: tdm-c-din2-z {
+						mux {
+							groups = "tdm_c_din2_z";
+							function = "tdm_c";
+							bias-disable;
+						};
+					};
+
+					tdm_c_din3_a_pins: tdm-c-din3-a {
+						mux {
+							groups = "tdm_c_din3_a";
+							function = "tdm_c";
+							bias-disable;
+						};
+					};
+
+					tdm_c_din3_z_pins: tdm-c-din3-z {
+						mux {
+							groups = "tdm_c_din3_z";
+							function = "tdm_c";
+							bias-disable;
+						};
+					};
+
+					tdm_c_dout0_a_pins: tdm-c-dout0-a {
+						mux {
+							groups = "tdm_c_dout0_a";
+							function = "tdm_c";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_c_dout0_z_pins: tdm-c-dout0-z {
+						mux {
+							groups = "tdm_c_dout0_z";
+							function = "tdm_c";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_c_dout1_a_pins: tdm-c-dout1-a {
+						mux {
+							groups = "tdm_c_dout1_a";
+							function = "tdm_c";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_c_dout1_z_pins: tdm-c-dout1-z {
+						mux {
+							groups = "tdm_c_dout1_z";
+							function = "tdm_c";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_c_dout2_a_pins: tdm-c-dout2-a {
+						mux {
+							groups = "tdm_c_dout2_a";
+							function = "tdm_c";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_c_dout2_z_pins: tdm-c-dout2-z {
+						mux {
+							groups = "tdm_c_dout2_z";
+							function = "tdm_c";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_c_dout3_a_pins: tdm-c-dout3-a {
+						mux {
+							groups = "tdm_c_dout3_a";
+							function = "tdm_c";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_c_dout3_z_pins: tdm-c-dout3-z {
+						mux {
+							groups = "tdm_c_dout3_z";
+							function = "tdm_c";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_c_fs_a_pins: tdm-c-fs-a {
+						mux {
+							groups = "tdm_c_fs_a";
+							function = "tdm_c";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_c_fs_z_pins: tdm-c-fs-z {
+						mux {
+							groups = "tdm_c_fs_z";
+							function = "tdm_c";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_c_sclk_a_pins: tdm-c-sclk-a {
+						mux {
+							groups = "tdm_c_sclk_a";
+							function = "tdm_c";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_c_sclk_z_pins: tdm-c-sclk-z {
+						mux {
+							groups = "tdm_c_sclk_z";
+							function = "tdm_c";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_c_slv_fs_a_pins: tdm-c-slv-fs-a {
+						mux {
+							groups = "tdm_c_slv_fs_a";
+							function = "tdm_c";
+							bias-disable;
+						};
+					};
+
+					tdm_c_slv_fs_z_pins: tdm-c-slv-fs-z {
+						mux {
+							groups = "tdm_c_slv_fs_z";
+							function = "tdm_c";
+							bias-disable;
+						};
+					};
+
+					tdm_c_slv_sclk_a_pins: tdm-c-slv-sclk-a {
+						mux {
+							groups = "tdm_c_slv_sclk_a";
+							function = "tdm_c";
+							bias-disable;
+						};
+					};
+
+					tdm_c_slv_sclk_z_pins: tdm-c-slv-sclk-z {
+						mux {
+							groups = "tdm_c_slv_sclk_z";
+							function = "tdm_c";
+							bias-disable;
+						};
+					};
+
 					uart_a_pins: uart-a {
 						mux {
 							groups = "uart_a_tx",
@@ -783,6 +1245,108 @@
 					#reset-cells = <1>;
 					clocks = <&clkc_audio AUD_CLKID_DDR_ARB>;
 				};
+
+				tdmin_a: audio-controller@300 {
+					compatible = "amlogic,g12a-tdmin",
+						     "amlogic,axg-tdmin";
+					reg = <0x0 0x300 0x0 0x40>;
+					sound-name-prefix = "TDMIN_A";
+					clocks = <&clkc_audio AUD_CLKID_TDMIN_A>,
+						 <&clkc_audio AUD_CLKID_TDMIN_A_SCLK>,
+						 <&clkc_audio AUD_CLKID_TDMIN_A_SCLK_SEL>,
+						 <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>,
+						 <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>;
+					clock-names = "pclk", "sclk", "sclk_sel",
+						      "lrclk", "lrclk_sel";
+					status = "disabled";
+				};
+
+				tdmin_b: audio-controller@340 {
+					compatible = "amlogic,g12a-tdmin",
+						     "amlogic,axg-tdmin";
+					reg = <0x0 0x340 0x0 0x40>;
+					sound-name-prefix = "TDMIN_B";
+					clocks = <&clkc_audio AUD_CLKID_TDMIN_B>,
+						 <&clkc_audio AUD_CLKID_TDMIN_B_SCLK>,
+						 <&clkc_audio AUD_CLKID_TDMIN_B_SCLK_SEL>,
+						 <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>,
+						 <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>;
+					clock-names = "pclk", "sclk", "sclk_sel",
+						      "lrclk", "lrclk_sel";
+					status = "disabled";
+				};
+
+				tdmin_c: audio-controller@380 {
+					compatible = "amlogic,g12a-tdmin",
+						     "amlogic,axg-tdmin";
+					reg = <0x0 0x380 0x0 0x40>;
+					sound-name-prefix = "TDMIN_C";
+					clocks = <&clkc_audio AUD_CLKID_TDMIN_C>,
+						 <&clkc_audio AUD_CLKID_TDMIN_C_SCLK>,
+						 <&clkc_audio AUD_CLKID_TDMIN_C_SCLK_SEL>,
+						 <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>,
+						 <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>;
+					clock-names = "pclk", "sclk", "sclk_sel",
+						      "lrclk", "lrclk_sel";
+					status = "disabled";
+				};
+
+				tdmin_lb: audio-controller@3c0 {
+					compatible = "amlogic,g12a-tdmin",
+						     "amlogic,axg-tdmin";
+					reg = <0x0 0x3c0 0x0 0x40>;
+					sound-name-prefix = "TDMIN_LB";
+					clocks = <&clkc_audio AUD_CLKID_TDMIN_LB>,
+						 <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK>,
+						 <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK_SEL>,
+						 <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>,
+						 <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>;
+					clock-names = "pclk", "sclk", "sclk_sel",
+						      "lrclk", "lrclk_sel";
+					status = "disabled";
+				};
+
+				tdmout_a: audio-controller@500 {
+					compatible = "amlogic,g12a-tdmout";
+					reg = <0x0 0x500 0x0 0x40>;
+					sound-name-prefix = "TDMOUT_A";
+					clocks = <&clkc_audio AUD_CLKID_TDMOUT_A>,
+						 <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK>,
+						 <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK_SEL>,
+						 <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>,
+						 <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>;
+					clock-names = "pclk", "sclk", "sclk_sel",
+						      "lrclk", "lrclk_sel";
+					status = "disabled";
+				};
+
+				tdmout_b: audio-controller@540 {
+					compatible = "amlogic,g12a-tdmout";
+					reg = <0x0 0x540 0x0 0x40>;
+					sound-name-prefix = "TDMOUT_B";
+					clocks = <&clkc_audio AUD_CLKID_TDMOUT_B>,
+						 <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK>,
+						 <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK_SEL>,
+						 <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>,
+						 <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>;
+					clock-names = "pclk", "sclk", "sclk_sel",
+						      "lrclk", "lrclk_sel";
+					status = "disabled";
+				};
+
+				tdmout_c: audio-controller@580 {
+					compatible = "amlogic,g12a-tdmout";
+					reg = <0x0 0x580 0x0 0x40>;
+					sound-name-prefix = "TDMOUT_C";
+					clocks = <&clkc_audio AUD_CLKID_TDMOUT_C>,
+						 <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK>,
+						 <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK_SEL>,
+						 <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>,
+						 <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>;
+					clock-names = "pclk", "sclk", "sclk_sel",
+						      "lrclk", "lrclk_sel";
+					status = "disabled";
+				};
 			};
 
 			usb3_pcie_phy: phy@46000 {
@@ -919,6 +1483,100 @@
 						};
 					};
 
+					mclk0_ao_pins: mclk0-ao {
+						mux {
+							groups = "mclk0_ao";
+							function = "mclk0_ao";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_ao_b_din0_pins: tdm-ao-b-din0 {
+						mux {
+							groups = "tdm_ao_b_din0";
+							function = "tdm_ao_b";
+							bias-disable;
+						};
+					};
+
+					tdm_ao_b_din1_pins: tdm-ao-b-din1 {
+						mux {
+							groups = "tdm_ao_b_din1";
+							function = "tdm_ao_b";
+							bias-disable;
+						};
+					};
+
+					tdm_ao_b_din2_pins: tdm-ao-b-din2 {
+						mux {
+							groups = "tdm_ao_b_din2";
+							function = "tdm_ao_b";
+							bias-disable;
+						};
+					};
+
+					tdm_ao_b_dout0_pins: tdm-ao-b-dout0 {
+						mux {
+							groups = "tdm_ao_b_dout0";
+							function = "tdm_ao_b";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_ao_b_dout1_pins: tdm-ao-b-dout1 {
+						mux {
+							groups = "tdm_ao_b_dout1";
+							function = "tdm_ao_b";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_ao_b_dout2_pins: tdm-ao-b-dout2 {
+						mux {
+							groups = "tdm_ao_b_dout2";
+							function = "tdm_ao_b";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_ao_b_fs_pins: tdm-ao-b-fs {
+						mux {
+							groups = "tdm_ao_b_fs";
+							function = "tdm_ao_b";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_ao_b_sclk_pins: tdm-ao-b-sclk {
+						mux {
+							groups = "tdm_ao_b_sclk";
+							function = "tdm_ao_b";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_ao_b_slv_fs_pins: tdm-ao-b-slv-fs {
+						mux {
+							groups = "tdm_ao_b_slv_fs";
+							function = "tdm_ao_b";
+							bias-disable;
+						};
+					};
+
+					tdm_ao_b_slv_sclk_pins: tdm-ao-b-slv-sclk {
+						mux {
+							groups = "tdm_ao_b_slv_sclk";
+							function = "tdm_ao_b";
+							bias-disable;
+						};
+					};
+
 					uart_ao_a_pins: uart-a-ao {
 						mux {
 							groups = "uart_ao_a_tx",
-- 
2.20.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH 5/8] arm64: dts: meson: g12a: add spdifouts

[Jerome Brunet]

Add the devices nodes and pinctrl definitions for the spdif outputs of
the g12a SoC family

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
 arch/arm64/boot/dts/amlogic/meson-g12a.dtsi | 60 +++++++++++++++++++++
 1 file changed, 60 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
index 825e874918c2..fa10d6fbf370 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
@@ -643,6 +643,33 @@
 						};
 					};
 
+					spdif_out_h_pins: spdif-out-h {
+						mux {
+							groups = "spdif_out_h";
+							function = "spdif_out";
+							drive-strength-microamp = <500>;
+							bias-disable;
+						};
+					};
+
+					spdif_out_a11_pins: spdif-out-a11 {
+						mux {
+							groups = "spdif_out_a11";
+							function = "spdif_out";
+							drive-strength-microamp = <500>;
+							bias-disable;
+						};
+					};
+
+					spdif_out_a13_pins: spdif-out-a13 {
+						mux {
+							groups = "spdif_out_a13";
+							function = "spdif_out";
+							drive-strength-microamp = <500>;
+							bias-disable;
+						};
+					};
+
 					tdm_a_din0_pins: tdm-a-din0 {
 						mux {
 							groups = "tdm_a_din0";
@@ -1306,6 +1333,18 @@
 					status = "disabled";
 				};
 
+				spdifout: audio-controller@480 {
+					compatible = "amlogic,g12a-spdifout",
+						     "amlogic,axg-spdifout";
+					reg = <0x0 0x480 0x0 0x50>;
+					#sound-dai-cells = <0>;
+					sound-name-prefix = "SPDIFOUT";
+					clocks = <&clkc_audio AUD_CLKID_SPDIFOUT>,
+						 <&clkc_audio AUD_CLKID_SPDIFOUT_CLK>;
+					clock-names = "pclk", "mclk";
+					status = "disabled";
+				};
+
 				tdmout_a: audio-controller@500 {
 					compatible = "amlogic,g12a-tdmout";
 					reg = <0x0 0x500 0x0 0x40>;
@@ -1347,6 +1386,18 @@
 						      "lrclk", "lrclk_sel";
 					status = "disabled";
 				};
+
+				spdifout_b: audio-controller@680 {
+					compatible = "amlogic,g12a-spdifout",
+						     "amlogic,axg-spdifout";
+					reg = <0x0 0x680 0x0 0x50>;
+					#sound-dai-cells = <0>;
+					sound-name-prefix = "SPDIFOUT_B";
+					clocks = <&clkc_audio AUD_CLKID_SPDIFOUT_B>,
+						 <&clkc_audio AUD_CLKID_SPDIFOUT_B_CLK>;
+					clock-names = "pclk", "mclk";
+					status = "disabled";
+				};
 			};
 
 			usb3_pcie_phy: phy@46000 {
@@ -1500,6 +1551,15 @@
 						};
 					};
 
+					spdif_ao_out_pins: spdif_ao_out {
+						mux {
+							groups = "spdif_ao_out";
+							function = "spdif_ao_out";
+							drive-strength-microamp = <500>;
+							bias-disable;
+						};
+					};
+
 					tdm_ao_b_din1_pins: tdm-ao-b-din1 {
 						mux {
 							groups = "tdm_ao_b_din1";
-- 
2.20.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH 6/8] arm64: dts: meson: g12a: add pdm

[Jerome Brunet]

Add the pdm device node and the pinctrl definition for this capture
interface g12a SoC family

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
 arch/arm64/boot/dts/amlogic/meson-g12a.dtsi | 177 ++++++++++++++++++++
 1 file changed, 177 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
index fa10d6fbf370..37119564274b 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
@@ -497,6 +497,170 @@
 						};
 					};
 
+					pdm_din0_a_pins: pdm_din0_a {
+						mux {
+							groups = "pdm_din0_a";
+							function = "pdm";
+							bias-disable;
+						};
+					};
+
+					pdm_din0_c_pins: pdm_din0_c {
+						mux {
+							groups = "pdm_din0_c";
+							function = "pdm";
+							bias-disable;
+						};
+					};
+
+					pdm_din0_x_pins: pdm_din0_x {
+						mux {
+							groups = "pdm_din0_x";
+							function = "pdm";
+							bias-disable;
+						};
+					};
+
+					pdm_din0_z_pins: pdm_din0_z {
+						mux {
+							groups = "pdm_din0_z";
+							function = "pdm";
+							bias-disable;
+						};
+					};
+
+					pdm_din1_a_pins: pdm_din1_a {
+						mux {
+							groups = "pdm_din1_a";
+							function = "pdm";
+							bias-disable;
+						};
+					};
+
+					pdm_din1_c_pins: pdm_din1_c {
+						mux {
+							groups = "pdm_din1_c";
+							function = "pdm";
+							bias-disable;
+						};
+					};
+
+					pdm_din1_x_pins: pdm_din1_x {
+						mux {
+							groups = "pdm_din1_x";
+							function = "pdm";
+							bias-disable;
+						};
+					};
+
+					pdm_din1_z_pins: pdm_din1_z {
+						mux {
+							groups = "pdm_din1_z";
+							function = "pdm";
+							bias-disable;
+						};
+					};
+
+					pdm_din2_a_pins: pdm_din2_a {
+						mux {
+							groups = "pdm_din2_a";
+							function = "pdm";
+							bias-disable;
+						};
+					};
+
+					pdm_din2_c_pins: pdm_din2_c {
+						mux {
+							groups = "pdm_din2_c";
+							function = "pdm";
+							bias-disable;
+						};
+					};
+
+					pdm_din2_x_pins: pdm_din2_x {
+						mux {
+							groups = "pdm_din2_x";
+							function = "pdm";
+							bias-disable;
+						};
+					};
+
+					pdm_din2_z_pins: pdm_din2_z {
+						mux {
+							groups = "pdm_din2_z";
+							function = "pdm";
+							bias-disable;
+						};
+					};
+
+					pdm_din3_a_pins: pdm_din3_a {
+						mux {
+							groups = "pdm_din3_a";
+							function = "pdm";
+							bias-disable;
+						};
+					};
+
+					pdm_din3_c_pins: pdm_din3_c {
+						mux {
+							groups = "pdm_din3_c";
+							function = "pdm";
+							bias-disable;
+						};
+					};
+
+					pdm_din3_x_pins: pdm_din3_x {
+						mux {
+							groups = "pdm_din3_x";
+							function = "pdm";
+							bias-disable;
+						};
+					};
+
+					pdm_din3_z_pins: pdm_din3_z {
+						mux {
+							groups = "pdm_din3_z";
+							function = "pdm";
+							bias-disable;
+						};
+					};
+
+					pdm_dclk_a_pins: pdm_dclk_a {
+						mux {
+							groups = "pdm_dclk_a";
+							function = "pdm";
+							bias-disable;
+							drive-strength-microamp = <500>;
+						};
+					};
+
+					pdm_dclk_c_pins: pdm_dclk_c {
+						mux {
+							groups = "pdm_dclk_c";
+							function = "pdm";
+							bias-disable;
+							drive-strength-microamp = <500>;
+						};
+					};
+
+					pdm_dclk_x_pins: pdm_dclk_x {
+						mux {
+							groups = "pdm_dclk_x";
+							function = "pdm";
+							bias-disable;
+							drive-strength-microamp = <500>;
+						};
+					};
+
+					pdm_dclk_z_pins: pdm_dclk_z {
+						mux {
+							groups = "pdm_dclk_z";
+							function = "pdm";
+							bias-disable;
+							drive-strength-microamp = <500>;
+						};
+					};
+
 					pwm_a_pins: pwm-a {
 						mux {
 							groups = "pwm_a";
@@ -1164,6 +1328,19 @@
 				};
 			};
 
+			pdm: audio-controller@40000 {
+				compatible = "amlogic,g12a-pdm",
+					     "amlogic,axg-pdm";
+				reg = <0x0 0x40000 0x0 0x34>;
+				#sound-dai-cells = <0>;
+				sound-name-prefix = "PDM";
+				clocks = <&clkc_audio AUD_CLKID_PDM>,
+					 <&clkc_audio AUD_CLKID_PDM_DCLK>,
+					 <&clkc_audio AUD_CLKID_PDM_SYSCLK>;
+				clock-names = "pclk", "dclk", "sysclk";
+				status = "disabled";
+			};
+
 			audio: bus@42000 {
 				compatible = "simple-bus";
 				reg = <0x0 0x42000 0x0 0x2000>;
-- 
2.20.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH 7/8] arm64: dts: meson: g12a: add spdifin

[Jerome Brunet]

Add the spdif input device node and the pinctrl definition for
this capture interface g12a SoC family

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
 arch/arm64/boot/dts/amlogic/meson-g12a.dtsi | 37 +++++++++++++++++++++
 1 file changed, 37 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
index 37119564274b..d4fc645f0ff3 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
@@ -807,6 +807,30 @@
 						};
 					};
 
+					spdif_in_a10_pins: spdif-in-a10 {
+						mux {
+							groups = "spdif_in_a10";
+							function = "spdif_in";
+							bias-disable;
+						};
+					};
+
+					spdif_in_a12_pins: spdif-in-a12 {
+						mux {
+							groups = "spdif_in_a12";
+							function = "spdif_in";
+							bias-disable;
+						};
+					};
+
+					spdif_in_h_pins: spdif-in-h {
+						mux {
+							groups = "spdif_in_h";
+							function = "spdif_in";
+							bias-disable;
+						};
+					};
+
 					spdif_out_h_pins: spdif-out-h {
 						mux {
 							groups = "spdif_out_h";
@@ -1510,6 +1534,19 @@
 					status = "disabled";
 				};
 
+				spdifin: audio-controller@400 {
+					compatible = "amlogic,g12a-spdifin",
+						     "amlogic,axg-spdifin";
+					reg = <0x0 0x400 0x0 0x30>;
+					#sound-dai-cells = <0>;
+					sound-name-prefix = "SPDIFIN";
+					interrupts = <GIC_SPI 151 IRQ_TYPE_EDGE_RISING>;
+					clocks = <&clkc_audio AUD_CLKID_SPDIFIN>,
+						 <&clkc_audio AUD_CLKID_SPDIFIN_CLK>;
+					clock-names = "pclk", "refclk";
+					status = "disabled";
+				};
+
 				spdifout: audio-controller@480 {
 					compatible = "amlogic,g12a-spdifout",
 						     "amlogic,axg-spdifout";
-- 
2.20.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH 8/8] arm64: dts: meson: g12a: enable hdmi_tx sound dai provider

[Jerome Brunet]

At the moment the sysnopsys hdmi i2s driver provides a single playback
DAI. Add the corresponding sound-dai-cell to the hdmi device node.

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
 arch/arm64/boot/dts/amlogic/meson-g12a.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
index d4fc645f0ff3..5c8c93ff4816 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
@@ -158,6 +158,7 @@
 				clock-names = "isfr", "iahb", "venci";
 				#address-cells = <1>;
 				#size-cells = <0>;
+				#sound-dai-cells = <0>;
 				status = "disabled";
 
 				/* VPU VENC Input */
-- 
2.20.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic