From: Jerome Brunet <jbrunet@baylibre.com>
To: Kevin Hilman <khilman@baylibre.com>
Cc: devicetree@vger.kernel.org, linux-amlogic@lists.infradead.org,
linux-kernel@vger.kernel.org,
Jerome Brunet <jbrunet@baylibre.com>
Subject: [PATCH 5/8] arm64: dts: meson: g12a: add spdifouts
Date: Tue, 14 May 2019 13:15:07 +0200 [thread overview]
Message-ID: <20190514111510.23299-6-jbrunet@baylibre.com> (raw)
In-Reply-To: <20190514111510.23299-1-jbrunet@baylibre.com>
Add the devices nodes and pinctrl definitions for the spdif outputs of
the g12a SoC family
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
arch/arm64/boot/dts/amlogic/meson-g12a.dtsi | 60 +++++++++++++++++++++
1 file changed, 60 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
index 825e874918c2..fa10d6fbf370 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
@@ -643,6 +643,33 @@
};
};
+ spdif_out_h_pins: spdif-out-h {
+ mux {
+ groups = "spdif_out_h";
+ function = "spdif_out";
+ drive-strength-microamp = <500>;
+ bias-disable;
+ };
+ };
+
+ spdif_out_a11_pins: spdif-out-a11 {
+ mux {
+ groups = "spdif_out_a11";
+ function = "spdif_out";
+ drive-strength-microamp = <500>;
+ bias-disable;
+ };
+ };
+
+ spdif_out_a13_pins: spdif-out-a13 {
+ mux {
+ groups = "spdif_out_a13";
+ function = "spdif_out";
+ drive-strength-microamp = <500>;
+ bias-disable;
+ };
+ };
+
tdm_a_din0_pins: tdm-a-din0 {
mux {
groups = "tdm_a_din0";
@@ -1306,6 +1333,18 @@
status = "disabled";
};
+ spdifout: audio-controller@480 {
+ compatible = "amlogic,g12a-spdifout",
+ "amlogic,axg-spdifout";
+ reg = <0x0 0x480 0x0 0x50>;
+ #sound-dai-cells = <0>;
+ sound-name-prefix = "SPDIFOUT";
+ clocks = <&clkc_audio AUD_CLKID_SPDIFOUT>,
+ <&clkc_audio AUD_CLKID_SPDIFOUT_CLK>;
+ clock-names = "pclk", "mclk";
+ status = "disabled";
+ };
+
tdmout_a: audio-controller@500 {
compatible = "amlogic,g12a-tdmout";
reg = <0x0 0x500 0x0 0x40>;
@@ -1347,6 +1386,18 @@
"lrclk", "lrclk_sel";
status = "disabled";
};
+
+ spdifout_b: audio-controller@680 {
+ compatible = "amlogic,g12a-spdifout",
+ "amlogic,axg-spdifout";
+ reg = <0x0 0x680 0x0 0x50>;
+ #sound-dai-cells = <0>;
+ sound-name-prefix = "SPDIFOUT_B";
+ clocks = <&clkc_audio AUD_CLKID_SPDIFOUT_B>,
+ <&clkc_audio AUD_CLKID_SPDIFOUT_B_CLK>;
+ clock-names = "pclk", "mclk";
+ status = "disabled";
+ };
};
usb3_pcie_phy: phy@46000 {
@@ -1500,6 +1551,15 @@
};
};
+ spdif_ao_out_pins: spdif_ao_out {
+ mux {
+ groups = "spdif_ao_out";
+ function = "spdif_ao_out";
+ drive-strength-microamp = <500>;
+ bias-disable;
+ };
+ };
+
tdm_ao_b_din1_pins: tdm-ao-b-din1 {
mux {
groups = "tdm_ao_b_din1";
--
2.20.1
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
next prev parent reply other threads:[~2019-05-14 11:15 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-14 11:15 [PATCH 0/8] arm64: dts: meson: g12a: add audio devices Jerome Brunet
2019-05-14 11:15 ` [PATCH 1/8] arm64: dts: meson: g12a: add audio clock controller Jerome Brunet
2019-05-14 11:15 ` [PATCH 2/8] arm64: dts: meson: g12a: add audio memory arbitrer Jerome Brunet
2019-05-14 11:15 ` [PATCH 3/8] arm64: dts: meson: g12a: add audio fifos Jerome Brunet
2019-05-14 11:15 ` [PATCH 4/8] arm64: dts: meson: g12a: add tdm Jerome Brunet
2019-05-14 11:15 ` Jerome Brunet [this message]
2019-05-14 11:15 ` [PATCH 6/8] arm64: dts: meson: g12a: add pdm Jerome Brunet
2019-05-14 11:15 ` [PATCH 7/8] arm64: dts: meson: g12a: add spdifin Jerome Brunet
2019-05-14 11:15 ` [PATCH 8/8] arm64: dts: meson: g12a: enable hdmi_tx sound dai provider Jerome Brunet
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190514111510.23299-6-jbrunet@baylibre.com \
--to=jbrunet@baylibre.com \
--cc=devicetree@vger.kernel.org \
--cc=khilman@baylibre.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).