Linux-Amlogic Archive on lore.kernel.org
 help / color / Atom feed
From: Jerome Brunet <jbrunet@baylibre.com>
To: Kevin Hilman <khilman@baylibre.com>
Cc: devicetree@vger.kernel.org, linux-amlogic@lists.infradead.org,
	linux-kernel@vger.kernel.org,
	Jerome Brunet <jbrunet@baylibre.com>
Subject: [PATCH v2 5/8] arm64: dts: meson: g12a: add spdifouts
Date: Tue, 14 May 2019 16:26:46 +0200
Message-ID: <20190514142649.1127-6-jbrunet@baylibre.com> (raw)
In-Reply-To: <20190514142649.1127-1-jbrunet@baylibre.com>

Add the devices nodes and pinctrl definitions for the spdif outputs of
the g12a SoC family

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
 arch/arm64/boot/dts/amlogic/meson-g12a.dtsi | 60 +++++++++++++++++++++
 1 file changed, 60 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
index 40a82ddda79f..f25a7c7ed995 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
@@ -643,6 +643,33 @@
 						};
 					};
 
+					spdif_out_h_pins: spdif-out-h {
+						mux {
+							groups = "spdif_out_h";
+							function = "spdif_out";
+							drive-strength-microamp = <500>;
+							bias-disable;
+						};
+					};
+
+					spdif_out_a11_pins: spdif-out-a11 {
+						mux {
+							groups = "spdif_out_a11";
+							function = "spdif_out";
+							drive-strength-microamp = <500>;
+							bias-disable;
+						};
+					};
+
+					spdif_out_a13_pins: spdif-out-a13 {
+						mux {
+							groups = "spdif_out_a13";
+							function = "spdif_out";
+							drive-strength-microamp = <500>;
+							bias-disable;
+						};
+					};
+
 					tdm_a_din0_pins: tdm-a-din0 {
 						mux {
 							groups = "tdm_a_din0";
@@ -1312,6 +1339,18 @@
 					status = "disabled";
 				};
 
+				spdifout: audio-controller@480 {
+					compatible = "amlogic,g12a-spdifout",
+						     "amlogic,axg-spdifout";
+					reg = <0x0 0x480 0x0 0x50>;
+					#sound-dai-cells = <0>;
+					sound-name-prefix = "SPDIFOUT";
+					clocks = <&clkc_audio AUD_CLKID_SPDIFOUT>,
+						 <&clkc_audio AUD_CLKID_SPDIFOUT_CLK>;
+					clock-names = "pclk", "mclk";
+					status = "disabled";
+				};
+
 				tdmout_a: audio-controller@500 {
 					compatible = "amlogic,g12a-tdmout";
 					reg = <0x0 0x500 0x0 0x40>;
@@ -1353,6 +1392,18 @@
 						      "lrclk", "lrclk_sel";
 					status = "disabled";
 				};
+
+				spdifout_b: audio-controller@680 {
+					compatible = "amlogic,g12a-spdifout",
+						     "amlogic,axg-spdifout";
+					reg = <0x0 0x680 0x0 0x50>;
+					#sound-dai-cells = <0>;
+					sound-name-prefix = "SPDIFOUT_B";
+					clocks = <&clkc_audio AUD_CLKID_SPDIFOUT_B>,
+						 <&clkc_audio AUD_CLKID_SPDIFOUT_B_CLK>;
+					clock-names = "pclk", "mclk";
+					status = "disabled";
+				};
 			};
 
 			usb3_pcie_phy: phy@46000 {
@@ -1506,6 +1557,15 @@
 						};
 					};
 
+					spdif_ao_out_pins: spdif-ao-out {
+						mux {
+							groups = "spdif_ao_out";
+							function = "spdif_ao_out";
+							drive-strength-microamp = <500>;
+							bias-disable;
+						};
+					};
+
 					tdm_ao_b_din1_pins: tdm-ao-b-din1 {
 						mux {
 							groups = "tdm_ao_b_din1";
-- 
2.20.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

  parent reply index

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-14 14:26 [PATCH v2 0/8] arm64: dts: meson: g12a: add audio devices Jerome Brunet
2019-05-14 14:26 ` [PATCH v2 1/8] arm64: dts: meson: g12a: add audio clock controller Jerome Brunet
2019-05-14 14:26 ` [PATCH v2 2/8] arm64: dts: meson: g12a: add audio memory arbitrer Jerome Brunet
2019-05-14 14:26 ` [PATCH v2 3/8] arm64: dts: meson: g12a: add audio fifos Jerome Brunet
2019-05-14 14:26 ` [PATCH v2 4/8] arm64: dts: meson: g12a: add tdm Jerome Brunet
2019-05-14 14:26 ` Jerome Brunet [this message]
2019-05-14 14:26 ` [PATCH v2 6/8] arm64: dts: meson: g12a: add pdm Jerome Brunet
2019-05-14 14:26 ` [PATCH v2 7/8] arm64: dts: meson: g12a: add spdifin Jerome Brunet
2019-05-14 14:26 ` [PATCH v2 8/8] arm64: dts: meson: g12a: enable hdmi_tx sound dai provider Jerome Brunet
2019-05-20 21:16 ` [PATCH v2 0/8] arm64: dts: meson: g12a: add audio devices Kevin Hilman

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190514142649.1127-6-jbrunet@baylibre.com \
    --to=jbrunet@baylibre.com \
    --cc=devicetree@vger.kernel.org \
    --cc=khilman@baylibre.com \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-Amlogic Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-amlogic/0 linux-amlogic/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-amlogic linux-amlogic/ https://lore.kernel.org/linux-amlogic \
		linux-amlogic@lists.infradead.org linux-amlogic@archiver.kernel.org
	public-inbox-index linux-amlogic


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-amlogic


AGPL code for this site: git clone https://public-inbox.org/ public-inbox