Linux-Amlogic Archive on lore.kernel.org
 help / Atom feed
From: Jerome Brunet <jbrunet@baylibre.com>
To: Linus Walleij <linus.walleij@linaro.org>,
	Kevin Hilman <khilman@baylibre.com>
Cc: linux-gpio@vger.kernel.org, devicetree@vger.kernel.org,
	linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org,
	Jerome Brunet <jbrunet@baylibre.com>
Subject: [PATCH 1/2] dt-bindings: pinctrl: meson: add output support in pinconf
Date: Thu, 16 May 2019 17:13:38 +0200
Message-ID: <20190516151339.25846-2-jbrunet@baylibre.com> (raw)
In-Reply-To: <20190516151339.25846-1-jbrunet@baylibre.com>

add support for the pinconf DT property output-enable, output-disable,
output-low and output-high in the meson pinctrl driver.

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
 .../devicetree/bindings/pinctrl/meson,pinctrl.txt    | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt
index a7618605bf1e..10dc4f7176ca 100644
--- a/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt
@@ -47,9 +47,15 @@ Required properties for pinmux nodes are:
 Required properties for configuration nodes:
  - pins: a list of pin names
 
-Configuration nodes support the generic properties "bias-disable",
-"bias-pull-up" and "bias-pull-down", described in file
-pinctrl-bindings.txt
+Configuration nodes support the following generic properties, as
+described in file pinctrl-bindings.txt:
+ - "bias-disable"
+ - "bias-pull-up"
+ - "bias-pull-down"
+ - "output-enable"
+ - "output-disable"
+ - "output-low"
+ - "output-high"
 
 Optional properties :
  - drive-strength-microamp: Drive strength for the specified pins in uA.
-- 
2.20.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

  reply index

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-16 15:13 [PATCH 0/2] pinctrl: meson: pinconf output support Jerome Brunet
2019-05-16 15:13 ` Jerome Brunet [this message]
2019-05-16 15:13 ` [PATCH 2/2] pinctrl: meson: add output support in pinconf Jerome Brunet

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190516151339.25846-2-jbrunet@baylibre.com \
    --to=jbrunet@baylibre.com \
    --cc=devicetree@vger.kernel.org \
    --cc=khilman@baylibre.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-Amlogic Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-amlogic/0 linux-amlogic/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-amlogic linux-amlogic/ https://lore.kernel.org/linux-amlogic \
		linux-amlogic@lists.infradead.org linux-amlogic@archiver.kernel.org
	public-inbox-index linux-amlogic


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-amlogic


AGPL code for this site: git clone https://public-inbox.org/ public-inbox