Linux-Amlogic Archive on lore.kernel.org
 help / color / Atom feed
From: Neil Armstrong <narmstrong@baylibre.com>
To: a.hajda@samsung.com, Laurent.pinchart@ideasonboard.com
Cc: jernej.skrabec@siol.net, heiko@sntech.de,
	Neil Armstrong <narmstrong@baylibre.com>,
	maxime.ripard@bootlin.com, jonas@kwiboo.se, hjc@rock-chips.com,
	dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org,
	hverkuil@xs4all.nl, linux-amlogic@lists.infradead.org
Subject: [PATCH 4/5] drm/meson: Add YUV420 output support
Date: Mon, 20 May 2019 15:37:52 +0200
Message-ID: <20190520133753.23871-5-narmstrong@baylibre.com> (raw)
In-Reply-To: <20190520133753.23871-1-narmstrong@baylibre.com>

This patch adds support for the YUV420 output from the Amlogic Meson SoCs
Video Processing Unit to the HDMI Controller.

The YUV420 is obtained by generating a YUV444 pixel stream like
the classic HDMI display modes, but then the Video Encoder output
can be configured to down-sample the YUV444 pixel stream to a YUV420
stream.
In addition if pixel stream down-sampling, the Y Cb Cr components must
also be mapped differently to align with the HDMI2.0 specifications.

This mode needs a different clock generation scheme since the TMDS PHY
clock must match the 10x ration with the YUV420 pixel clock, but
the video encoder must run at 2x the pixel clock.

This patch adds the TMDS PHY clock value in all the video clock setup
in order to better support these specific uses cases and switch
to the Common Clock framework for clocks handling in the future.

When 420 is needed, it calls drm_bridge_format_set() for notify the
bridge the input format has changed to YUV420.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 drivers/gpu/drm/meson/meson_dw_hdmi.c   | 100 +++++++++++++++++++-----
 drivers/gpu/drm/meson/meson_vclk.c      |  93 ++++++++++++++++------
 drivers/gpu/drm/meson/meson_vclk.h      |   7 +-
 drivers/gpu/drm/meson/meson_venc.c      |   6 +-
 drivers/gpu/drm/meson/meson_venc.h      |  11 +++
 drivers/gpu/drm/meson/meson_venc_cvbs.c |   3 +-
 6 files changed, 174 insertions(+), 46 deletions(-)

diff --git a/drivers/gpu/drm/meson/meson_dw_hdmi.c b/drivers/gpu/drm/meson/meson_dw_hdmi.c
index 779da21143b9..5d67e2beba58 100644
--- a/drivers/gpu/drm/meson/meson_dw_hdmi.c
+++ b/drivers/gpu/drm/meson/meson_dw_hdmi.c
@@ -159,6 +159,7 @@ struct meson_dw_hdmi {
 	struct regulator *hdmi_supply;
 	u32 irq_stat;
 	struct dw_hdmi *hdmi;
+	unsigned long input_bus_format;
 };
 #define encoder_to_meson_dw_hdmi(x) \
 	container_of(x, struct meson_dw_hdmi, encoder)
@@ -308,6 +309,10 @@ static void meson_hdmi_phy_setup_mode(struct meson_dw_hdmi *dw_hdmi,
 	struct meson_drm *priv = dw_hdmi->priv;
 	unsigned int pixel_clock = mode->clock;
 
+	/* For 420, pixel clock is half unlike venc clock */
+	if (dw_hdmi->input_bus_format == MEDIA_BUS_FMT_UYYVYY8_0_5X24)
+		pixel_clock /= 2;
+
 	if (dw_hdmi_is_compatible(dw_hdmi, "amlogic,meson-gxl-dw-hdmi") ||
 	    dw_hdmi_is_compatible(dw_hdmi, "amlogic,meson-gxm-dw-hdmi")) {
 		if (pixel_clock >= 371250) {
@@ -383,25 +388,36 @@ static void dw_hdmi_set_vclk(struct meson_dw_hdmi *dw_hdmi,
 {
 	struct meson_drm *priv = dw_hdmi->priv;
 	int vic = drm_match_cea_mode(mode);
+	unsigned int phy_freq;
 	unsigned int vclk_freq;
 	unsigned int venc_freq;
 	unsigned int hdmi_freq;
 
 	vclk_freq = mode->clock;
 
+	/* For 420, pixel clock is half unlike venc clock */
+	if (dw_hdmi->input_bus_format == MEDIA_BUS_FMT_UYYVYY8_0_5X24)
+		vclk_freq /= 2;
+
+	/* TMDS clock is pixel_clock * 10 */
+	phy_freq = vclk_freq * 10;
+
 	if (!vic) {
-		meson_vclk_setup(priv, MESON_VCLK_TARGET_DMT, vclk_freq,
-				 vclk_freq, vclk_freq, false);
+		meson_vclk_setup(priv, MESON_VCLK_TARGET_DMT, phy_freq,
+				 vclk_freq, vclk_freq, vclk_freq, false);
 		return;
 	}
 
+	/* 480i/576i needs global pixel doubling */
 	if (mode->flags & DRM_MODE_FLAG_DBLCLK)
 		vclk_freq *= 2;
 
 	venc_freq = vclk_freq;
 	hdmi_freq = vclk_freq;
 
-	if (meson_venc_hdmi_venc_repeat(vic))
+	/* VENC double pixels for 1080i, 720p and YUV420 modes */
+	if (meson_venc_hdmi_venc_repeat(vic) ||
+	    dw_hdmi->input_bus_format == MEDIA_BUS_FMT_UYYVYY8_0_5X24)
 		venc_freq *= 2;
 
 	vclk_freq = max(venc_freq, hdmi_freq);
@@ -409,11 +425,11 @@ static void dw_hdmi_set_vclk(struct meson_dw_hdmi *dw_hdmi,
 	if (mode->flags & DRM_MODE_FLAG_DBLCLK)
 		venc_freq /= 2;
 
-	DRM_DEBUG_DRIVER("vclk:%d venc=%d hdmi=%d enci=%d\n",
-		vclk_freq, venc_freq, hdmi_freq,
+	DRM_DEBUG_DRIVER("vclk:%d phy=%d venc=%d hdmi=%d enci=%d\n",
+		phy_freq, vclk_freq, venc_freq, hdmi_freq,
 		priv->venc.hdmi_use_enci);
 
-	meson_vclk_setup(priv, MESON_VCLK_TARGET_HDMI, vclk_freq,
+	meson_vclk_setup(priv, MESON_VCLK_TARGET_HDMI, phy_freq, vclk_freq,
 			 venc_freq, hdmi_freq, priv->venc.hdmi_use_enci);
 }
 
@@ -446,8 +462,9 @@ static int dw_hdmi_phy_init(struct dw_hdmi *hdmi, void *data,
 	/* Enable normal output to PHY */
 	dw_hdmi->data->top_write(dw_hdmi, HDMITX_TOP_BIST_CNTL, BIT(12));
 
-	/* TMDS pattern setup (TOFIX Handle the YUV420 case) */
-	if (mode->clock > 340000) {
+	/* TMDS pattern setup */
+	if (mode->clock > 340000 &&
+	    dw_hdmi->input_bus_format == MEDIA_BUS_FMT_YUV8_1X24) {
 		dw_hdmi->data->top_write(dw_hdmi, HDMITX_TOP_TMDS_CLK_PTTN_01,
 				  0);
 		dw_hdmi->data->top_write(dw_hdmi, HDMITX_TOP_TMDS_CLK_PTTN_23,
@@ -622,6 +639,8 @@ dw_hdmi_mode_valid(struct drm_connector *connector,
 		   const struct drm_display_mode *mode)
 {
 	struct meson_drm *priv = connector->dev->dev_private;
+	bool is_hdmi2_sink = connector->display_info.hdmi.scdc.supported;
+	unsigned int phy_freq;
 	unsigned int vclk_freq;
 	unsigned int venc_freq;
 	unsigned int hdmi_freq;
@@ -630,9 +649,11 @@ dw_hdmi_mode_valid(struct drm_connector *connector,
 
 	DRM_DEBUG_DRIVER("Modeline " DRM_MODE_FMT "\n", DRM_MODE_ARG(mode));
 
-	/* If sink max TMDS clock, we reject the mode */
+	/* If sink does not support 540MHz, reject the non-420 HDMI2 modes */
 	if (connector->display_info.max_tmds_clock &&
-	    mode->clock > connector->display_info.max_tmds_clock)
+	    mode->clock > connector->display_info.max_tmds_clock &&
+	    !drm_mode_is_420_only(&connector->display_info, mode) &&
+	    !drm_mode_is_420_also(&connector->display_info, mode))
 		return MODE_BAD;
 
 	/* Check against non-VIC supported modes */
@@ -648,6 +669,15 @@ dw_hdmi_mode_valid(struct drm_connector *connector,
 
 	vclk_freq = mode->clock;
 
+	/* For 420, pixel clock is half unlike venc clock */
+	if (drm_mode_is_420_only(&connector->display_info, mode) ||
+	    (!is_hdmi2_sink &&
+	     drm_mode_is_420_also(&connector->display_info, mode)))
+		vclk_freq /= 2;
+
+	/* TMDS clock is pixel_clock * 10 */
+	phy_freq = vclk_freq * 10;
+
 	/* 480i/576i needs global pixel doubling */
 	if (mode->flags & DRM_MODE_FLAG_DBLCLK)
 		vclk_freq *= 2;
@@ -655,8 +685,11 @@ dw_hdmi_mode_valid(struct drm_connector *connector,
 	venc_freq = vclk_freq;
 	hdmi_freq = vclk_freq;
 
-	/* VENC double pixels for 1080i and 720p modes */
-	if (meson_venc_hdmi_venc_repeat(vic))
+	/* VENC double pixels for 1080i, 720p and YUV420 modes */
+	if (meson_venc_hdmi_venc_repeat(vic) ||
+	    drm_mode_is_420_only(&connector->display_info, mode) ||
+	    (!is_hdmi2_sink &&
+	     drm_mode_is_420_also(&connector->display_info, mode)))
 		venc_freq *= 2;
 
 	vclk_freq = max(venc_freq, hdmi_freq);
@@ -664,10 +697,10 @@ dw_hdmi_mode_valid(struct drm_connector *connector,
 	if (mode->flags & DRM_MODE_FLAG_DBLCLK)
 		venc_freq /= 2;
 
-	dev_dbg(connector->dev->dev, "%s: vclk:%d venc=%d hdmi=%d\n", __func__,
-		vclk_freq, venc_freq, hdmi_freq);
+	dev_dbg(connector->dev->dev, "%s: vclk:%d phy=%d venc=%d hdmi=%d\n",
+		__func__, phy_freq, vclk_freq, venc_freq, hdmi_freq);
 
-	return meson_vclk_vic_supported_freq(vclk_freq);
+	return meson_vclk_vic_supported_freq(phy_freq, vclk_freq);
 }
 
 /* Encoder */
@@ -685,6 +718,24 @@ static int meson_venc_hdmi_encoder_atomic_check(struct drm_encoder *encoder,
 					struct drm_crtc_state *crtc_state,
 					struct drm_connector_state *conn_state)
 {
+	struct meson_dw_hdmi *dw_hdmi = encoder_to_meson_dw_hdmi(encoder);
+	struct drm_display_info *info = &conn_state->connector->display_info;
+	struct drm_display_mode *mode = &crtc_state->mode;
+	bool is_hdmi2_sink =
+		conn_state->connector->display_info.hdmi.scdc.supported;
+
+	if (drm_mode_is_420_only(info, mode) ||
+	    (!is_hdmi2_sink && drm_mode_is_420_also(info, mode)))
+		dw_hdmi->input_bus_format = MEDIA_BUS_FMT_UYYVYY8_0_5X24;
+	else
+		dw_hdmi->input_bus_format = MEDIA_BUS_FMT_YUV8_1X24;
+
+	/* Specify the encoder output format to the bridge */
+	if (!drm_bridge_format_set(encoder->bridge,
+				   dw_hdmi->input_bus_format,
+				   V4L2_YCBCR_ENC_709))
+		return -EINVAL;
+
 	return 0;
 }
 
@@ -722,17 +773,29 @@ static void meson_venc_hdmi_encoder_mode_set(struct drm_encoder *encoder,
 	struct meson_dw_hdmi *dw_hdmi = encoder_to_meson_dw_hdmi(encoder);
 	struct meson_drm *priv = dw_hdmi->priv;
 	int vic = drm_match_cea_mode(mode);
+	unsigned int ycrcb_map = MESON_VENC_MAP_CB_Y_CR;
+	bool yuv420_mode = false;
 
 	DRM_DEBUG_DRIVER("\"%s\" vic %d\n", mode->name, vic);
 
+	if (dw_hdmi->input_bus_format == MEDIA_BUS_FMT_UYYVYY8_0_5X24) {
+		ycrcb_map = MESON_VENC_MAP_CR_Y_CB;
+		yuv420_mode = true;
+	}
+
 	/* VENC + VENC-DVI Mode setup */
-	meson_venc_hdmi_mode_set(priv, vic, mode);
+	meson_venc_hdmi_mode_set(priv, vic, ycrcb_map, yuv420_mode, mode);
 
 	/* VCLK Set clock */
 	dw_hdmi_set_vclk(dw_hdmi, mode);
 
-	/* Setup YUV444 to HDMI-TX, no 10bit diphering */
-	writel_relaxed(0, priv->io_base + _REG(VPU_HDMI_FMT_CTRL));
+	if (dw_hdmi->input_bus_format == MEDIA_BUS_FMT_UYYVYY8_0_5X24)
+		/* Setup YUV420 to HDMI-TX, no 10bit diphering */
+		writel_relaxed(2 | (2 << 2),
+			       priv->io_base + _REG(VPU_HDMI_FMT_CTRL));
+	else
+		/* Setup YUV444 to HDMI-TX, no 10bit diphering */
+		writel_relaxed(0, priv->io_base + _REG(VPU_HDMI_FMT_CTRL));
 }
 
 static const struct drm_encoder_helper_funcs
@@ -977,6 +1040,7 @@ static int meson_dw_hdmi_bind(struct device *dev, struct device *master,
 	dw_plat_data->phy_data = meson_dw_hdmi;
 	dw_plat_data->input_bus_format = MEDIA_BUS_FMT_YUV8_1X24;
 	dw_plat_data->input_bus_encoding = V4L2_YCBCR_ENC_709;
+	dw_plat_data->ycbcr_420_allowed = true;
 
 	platform_set_drvdata(pdev, meson_dw_hdmi);
 
diff --git a/drivers/gpu/drm/meson/meson_vclk.c b/drivers/gpu/drm/meson/meson_vclk.c
index b39034745444..44250eff8a3f 100644
--- a/drivers/gpu/drm/meson/meson_vclk.c
+++ b/drivers/gpu/drm/meson/meson_vclk.c
@@ -364,12 +364,17 @@ enum {
 /* 2970 /1 /1 /1 /5 /2  => /1 /1 */
 	MESON_VCLK_HDMI_297000,
 /* 5940 /1 /1 /2 /5 /1  => /1 /1 */
-	MESON_VCLK_HDMI_594000
+	MESON_VCLK_HDMI_594000,
+/* 2970 /1 /1 /1 /5 /1  => /1 /2 */
+	MESON_VCLK_HDMI_594000_YUV420,
 };
 
 struct meson_vclk_params {
+	unsigned int pll_freq;
+	unsigned int phy_freq;
+	unsigned int vclk_freq;
+	unsigned int venc_freq;
 	unsigned int pixel_freq;
-	unsigned int pll_base_freq;
 	unsigned int pll_od1;
 	unsigned int pll_od2;
 	unsigned int pll_od3;
@@ -377,8 +382,11 @@ struct meson_vclk_params {
 	unsigned int vclk_div;
 } params[] = {
 	[MESON_VCLK_HDMI_ENCI_54000] = {
+		.pll_freq = 4320000,
+		.phy_freq = 270000,
+		.vclk_freq = 54000,
+		.venc_freq = 54000,
 		.pixel_freq = 54000,
-		.pll_base_freq = 4320000,
 		.pll_od1 = 4,
 		.pll_od2 = 4,
 		.pll_od3 = 1,
@@ -386,8 +394,11 @@ struct meson_vclk_params {
 		.vclk_div = 1,
 	},
 	[MESON_VCLK_HDMI_DDR_54000] = {
-		.pixel_freq = 54000,
-		.pll_base_freq = 4320000,
+		.pll_freq = 4320000,
+		.phy_freq = 270000,
+		.vclk_freq = 54000,
+		.venc_freq = 54000,
+		.pixel_freq = 27000,
 		.pll_od1 = 4,
 		.pll_od2 = 4,
 		.pll_od3 = 1,
@@ -395,8 +406,11 @@ struct meson_vclk_params {
 		.vclk_div = 1,
 	},
 	[MESON_VCLK_HDMI_DDR_148500] = {
-		.pixel_freq = 148500,
-		.pll_base_freq = 2970000,
+		.pll_freq = 2970000,
+		.phy_freq = 742500,
+		.vclk_freq = 148500,
+		.venc_freq = 148500,
+		.pixel_freq = 74250,
 		.pll_od1 = 4,
 		.pll_od2 = 1,
 		.pll_od3 = 1,
@@ -404,8 +418,11 @@ struct meson_vclk_params {
 		.vclk_div = 1,
 	},
 	[MESON_VCLK_HDMI_74250] = {
+		.pll_freq = 2970000,
+		.phy_freq = 742500,
+		.vclk_freq = 74250,
+		.venc_freq = 74250,
 		.pixel_freq = 74250,
-		.pll_base_freq = 2970000,
 		.pll_od1 = 2,
 		.pll_od2 = 2,
 		.pll_od3 = 2,
@@ -413,8 +430,11 @@ struct meson_vclk_params {
 		.vclk_div = 1,
 	},
 	[MESON_VCLK_HDMI_148500] = {
+		.pll_freq = 2970000,
+		.phy_freq = 1485000,
+		.vclk_freq = 148500,
+		.venc_freq = 148500,
 		.pixel_freq = 148500,
-		.pll_base_freq = 2970000,
 		.pll_od1 = 1,
 		.pll_od2 = 2,
 		.pll_od3 = 2,
@@ -422,8 +442,11 @@ struct meson_vclk_params {
 		.vclk_div = 1,
 	},
 	[MESON_VCLK_HDMI_297000] = {
+		.pll_freq = 5940000,
+		.phy_freq = 2970000,
+		.venc_freq = 297000,
+		.vclk_freq = 297000,
 		.pixel_freq = 297000,
-		.pll_base_freq = 5940000,
 		.pll_od1 = 2,
 		.pll_od2 = 1,
 		.pll_od3 = 1,
@@ -431,14 +454,29 @@ struct meson_vclk_params {
 		.vclk_div = 2,
 	},
 	[MESON_VCLK_HDMI_594000] = {
+		.pll_freq = 5940000,
+		.phy_freq = 5940000,
+		.venc_freq = 594000,
+		.vclk_freq = 594000,
 		.pixel_freq = 594000,
-		.pll_base_freq = 5940000,
 		.pll_od1 = 1,
 		.pll_od2 = 1,
 		.pll_od3 = 2,
 		.vid_pll_div = VID_PLL_DIV_5,
 		.vclk_div = 1,
 	},
+	[MESON_VCLK_HDMI_594000_YUV420] = {
+		.pll_freq = 5940000,
+		.phy_freq = 2970000,
+		.venc_freq = 594000,
+		.vclk_freq = 594000,
+		.pixel_freq = 297000,
+		.pll_od1 = 2,
+		.pll_od2 = 1,
+		.pll_od3 = 1,
+		.vid_pll_div = VID_PLL_DIV_5,
+		.vclk_div = 1,
+	},
 	{ /* sentinel */ },
 };
 
@@ -696,6 +734,7 @@ static void meson_hdmi_pll_generic_set(struct meson_drm *priv,
 	unsigned int od, m, frac, od1, od2, od3;
 
 	if (meson_hdmi_pll_find_params(priv, pll_freq, &m, &frac, &od)) {
+		/* OD2 goes to the PHY, and needs to be *10, so keep OD3=1 */
 		od3 = 1;
 		if (od < 4) {
 			od1 = 2;
@@ -718,21 +757,28 @@ static void meson_hdmi_pll_generic_set(struct meson_drm *priv,
 }
 
 enum drm_mode_status
-meson_vclk_vic_supported_freq(unsigned int freq)
+meson_vclk_vic_supported_freq(unsigned int phy_freq,
+			      unsigned int vclk_freq)
 {
 	int i;
 
-	DRM_DEBUG_DRIVER("freq = %d\n", freq);
+	DRM_DEBUG_DRIVER("phy_freq = %d vclk_freq = %d\n",
+			 phy_freq, vclk_freq);
 
 	for (i = 0 ; params[i].pixel_freq ; ++i) {
 		DRM_DEBUG_DRIVER("i = %d pixel_freq = %d alt = %d\n",
 				 i, params[i].pixel_freq,
 				 FREQ_1000_1001(params[i].pixel_freq));
+		DRM_DEBUG_DRIVER("i = %d phy_freq = %d alt = %d\n",
+				 i, params[i].phy_freq,
+				 FREQ_1000_1001(params[i].phy_freq/10)*10);
 		/* Match strict frequency */
-		if (freq == params[i].pixel_freq)
+		if (phy_freq == params[i].phy_freq &&
+		    vclk_freq == params[i].vclk_freq)
 			return MODE_OK;
 		/* Match 1000/1001 variant */
-		if (freq == FREQ_1000_1001(params[i].pixel_freq))
+		if (phy_freq == (FREQ_1000_1001(params[i].phy_freq/10)*10) &&
+		    vclk_freq == FREQ_1000_1001(params[i].vclk_freq))
 			return MODE_OK;
 	}
 
@@ -960,8 +1006,9 @@ static void meson_vclk_set(struct meson_drm *priv, unsigned int pll_base_freq,
 }
 
 void meson_vclk_setup(struct meson_drm *priv, unsigned int target,
-		      unsigned int vclk_freq, unsigned int venc_freq,
-		      unsigned int dac_freq, bool hdmi_use_enci)
+		      unsigned int phy_freq, unsigned int vclk_freq,
+		      unsigned int venc_freq, unsigned int dac_freq,
+		      bool hdmi_use_enci)
 {
 	bool vic_alternate_clock = false;
 	unsigned int freq;
@@ -980,7 +1027,7 @@ void meson_vclk_setup(struct meson_drm *priv, unsigned int target,
 		 * - venc_div = 1
 		 * - encp encoder
 		 */
-		meson_vclk_set(priv, vclk_freq * 10, 0, 0, 0,
+		meson_vclk_set(priv, phy_freq, 0, 0, 0,
 			       VID_PLL_DIV_5, 2, 1, 1, false, false);
 		return;
 	}
@@ -1002,9 +1049,11 @@ void meson_vclk_setup(struct meson_drm *priv, unsigned int target,
 	}
 
 	for (freq = 0 ; params[freq].pixel_freq ; ++freq) {
-		if (vclk_freq == params[freq].pixel_freq ||
-		    vclk_freq == FREQ_1000_1001(params[freq].pixel_freq)) {
-			if (vclk_freq != params[freq].pixel_freq)
+		if ((phy_freq == params[freq].phy_freq ||
+		     phy_freq == FREQ_1000_1001(params[freq].phy_freq/10)*10) &&
+		    (vclk_freq == params[freq].vclk_freq ||
+		     vclk_freq == FREQ_1000_1001(params[freq].vclk_freq))) {
+			if (vclk_freq != params[freq].vclk_freq)
 				vic_alternate_clock = true;
 			else
 				vic_alternate_clock = false;
@@ -1033,7 +1082,7 @@ void meson_vclk_setup(struct meson_drm *priv, unsigned int target,
 		return;
 	}
 
-	meson_vclk_set(priv, params[freq].pll_base_freq,
+	meson_vclk_set(priv, params[freq].pll_freq,
 		       params[freq].pll_od1, params[freq].pll_od2,
 		       params[freq].pll_od3, params[freq].vid_pll_div,
 		       params[freq].vclk_div, hdmi_tx_div, venc_div,
diff --git a/drivers/gpu/drm/meson/meson_vclk.h b/drivers/gpu/drm/meson/meson_vclk.h
index 4bd8752da02a..c4d19ddfcd79 100644
--- a/drivers/gpu/drm/meson/meson_vclk.h
+++ b/drivers/gpu/drm/meson/meson_vclk.h
@@ -33,10 +33,11 @@ enum {
 enum drm_mode_status
 meson_vclk_dmt_supported_freq(struct meson_drm *priv, unsigned int freq);
 enum drm_mode_status
-meson_vclk_vic_supported_freq(unsigned int freq);
+meson_vclk_vic_supported_freq(unsigned int phy_freq, unsigned int vclk_freq);
 
 void meson_vclk_setup(struct meson_drm *priv, unsigned int target,
-		      unsigned int vclk_freq, unsigned int venc_freq,
-		      unsigned int dac_freq, bool hdmi_use_enci);
+		      unsigned int phy_freq, unsigned int vclk_freq,
+		      unsigned int venc_freq, unsigned int dac_freq,
+		      bool hdmi_use_enci);
 
 #endif /* __MESON_VCLK_H */
diff --git a/drivers/gpu/drm/meson/meson_venc.c b/drivers/gpu/drm/meson/meson_venc.c
index 6faca7313339..5460c4439612 100644
--- a/drivers/gpu/drm/meson/meson_venc.c
+++ b/drivers/gpu/drm/meson/meson_venc.c
@@ -958,6 +958,8 @@ bool meson_venc_hdmi_venc_repeat(int vic)
 EXPORT_SYMBOL_GPL(meson_venc_hdmi_venc_repeat);
 
 void meson_venc_hdmi_mode_set(struct meson_drm *priv, int vic,
+			      unsigned int ycrcb_map,
+			      bool yuv420_mode,
 			      struct drm_display_mode *mode)
 {
 	union meson_hdmi_venc_mode *vmode = NULL;
@@ -1508,8 +1510,8 @@ void meson_venc_hdmi_mode_set(struct meson_drm *priv, int vic,
 	writel_relaxed((use_enci ? 1 : 2) |
 		       (mode->flags & DRM_MODE_FLAG_PHSYNC ? 1 << 2 : 0) |
 		       (mode->flags & DRM_MODE_FLAG_PVSYNC ? 1 << 3 : 0) |
-		       4 << 5 |
-		       (venc_repeat ? 1 << 8 : 0) |
+		       (ycrcb_map << 5) |
+		       (venc_repeat || yuv420_mode ? 1 << 8 : 0) |
 		       (hdmi_repeat ? 1 << 12 : 0),
 		       priv->io_base + _REG(VPU_HDMI_SETTING));
 
diff --git a/drivers/gpu/drm/meson/meson_venc.h b/drivers/gpu/drm/meson/meson_venc.h
index 97eaebbfa0c4..5580bf38e381 100644
--- a/drivers/gpu/drm/meson/meson_venc.h
+++ b/drivers/gpu/drm/meson/meson_venc.h
@@ -33,6 +33,15 @@ enum {
 	MESON_VENC_MODE_HDMI,
 };
 
+enum {
+	MESON_VENC_MAP_CR_Y_CB = 0,
+	MESON_VENC_MAP_Y_CB_CR,
+	MESON_VENC_MAP_Y_CR_CB,
+	MESON_VENC_MAP_CB_CR_Y,
+	MESON_VENC_MAP_CB_Y_CR,
+	MESON_VENC_MAP_CR_CB_Y,
+};
+
 struct meson_cvbs_enci_mode {
 	unsigned int mode_tag;
 	unsigned int hso_begin; /* HSO begin position */
@@ -70,6 +79,8 @@ extern struct meson_cvbs_enci_mode meson_cvbs_enci_ntsc;
 void meson_venci_cvbs_mode_set(struct meson_drm *priv,
 			       struct meson_cvbs_enci_mode *mode);
 void meson_venc_hdmi_mode_set(struct meson_drm *priv, int vic,
+			      unsigned int ycrcb_map,
+			      bool yuv420_mode,
 			      struct drm_display_mode *mode);
 unsigned int meson_venci_get_field(struct meson_drm *priv);
 
diff --git a/drivers/gpu/drm/meson/meson_venc_cvbs.c b/drivers/gpu/drm/meson/meson_venc_cvbs.c
index 2c5341c881c4..c1bbc601cf13 100644
--- a/drivers/gpu/drm/meson/meson_venc_cvbs.c
+++ b/drivers/gpu/drm/meson/meson_venc_cvbs.c
@@ -218,7 +218,8 @@ static void meson_venc_cvbs_encoder_mode_set(struct drm_encoder *encoder,
 			/* Setup 27MHz vclk2 for ENCI and VDAC */
 			meson_vclk_setup(priv, MESON_VCLK_TARGET_CVBS,
 					 MESON_VCLK_CVBS, MESON_VCLK_CVBS,
-					 MESON_VCLK_CVBS, true);
+					 MESON_VCLK_CVBS, MESON_VCLK_CVBS,
+					 true);
 			break;
 		}
 	}
-- 
2.21.0


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

  parent reply index

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-20 13:37 [PATCH 0/5] drm/meson: Add support for HDMI2.0 YUV420 4k60 Neil Armstrong
2019-05-20 13:37 ` [PATCH 1/5] drm/bridge: dw-hdmi: allow ycbcr420 modes for >= 0x200a Neil Armstrong
2019-05-22  6:07   ` Andrzej Hajda
2019-06-05 12:59     ` Neil Armstrong
2019-05-20 13:37 ` [PATCH 2/5] drm/bridge: add encoder support to specify bridge input format Neil Armstrong
2019-05-27 15:29   ` Jernej Škrabec
2019-06-07 13:38   ` Laurent Pinchart
2019-06-07 14:11     ` Neil Armstrong
2019-05-20 13:37 ` [PATCH 3/5] drm/bridge: dw-hdmi: Add support for dynamic output format setup Neil Armstrong
2019-05-27 15:30   ` Jernej Škrabec
2019-05-20 13:37 ` Neil Armstrong [this message]
2019-06-06 17:11   ` [PATCH 4/5] drm/meson: Add YUV420 output support Kevin Hilman
2019-05-20 13:37 ` [PATCH 5/5] drm/meson: Output in YUV444 if sink supports it Neil Armstrong
2019-06-06 17:16   ` Kevin Hilman

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190520133753.23871-5-narmstrong@baylibre.com \
    --to=narmstrong@baylibre.com \
    --cc=Laurent.pinchart@ideasonboard.com \
    --cc=a.hajda@samsung.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=heiko@sntech.de \
    --cc=hjc@rock-chips.com \
    --cc=hverkuil@xs4all.nl \
    --cc=jernej.skrabec@siol.net \
    --cc=jonas@kwiboo.se \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=maxime.ripard@bootlin.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-Amlogic Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-amlogic/0 linux-amlogic/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-amlogic linux-amlogic/ https://lore.kernel.org/linux-amlogic \
		linux-amlogic@lists.infradead.org linux-amlogic@archiver.kernel.org
	public-inbox-index linux-amlogic


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-amlogic


AGPL code for this site: git clone https://public-inbox.org/ public-inbox