From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
To: narmstrong@baylibre.com, jbrunet@baylibre.com,
linux-amlogic@lists.infradead.org
Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH 2/4] clk: meson: meson8b: add the cts_amclk clocks
Date: Mon, 20 May 2019 22:03:17 +0200 [thread overview]
Message-ID: <20190520200319.9265-3-martin.blumenstingl@googlemail.com> (raw)
In-Reply-To: <20190520200319.9265-1-martin.blumenstingl@googlemail.com>
Add the I2S master clock also referred as cts_amclk. The setup for this
clock is identical to GXBB, so this ports commit 4087bd4b21702d ("clk:
meson: gxbb: add cts_amclk") to the Meson8/Meson8b/Meson8m2 clock
driver.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
drivers/clk/meson/meson8b.c | 65 +++++++++++++++++++++++++++++++++++++
drivers/clk/meson/meson8b.h | 5 ++-
2 files changed, 69 insertions(+), 1 deletion(-)
diff --git a/drivers/clk/meson/meson8b.c b/drivers/clk/meson/meson8b.c
index 62cd3a7f1f65..e00f42e7fc46 100644
--- a/drivers/clk/meson/meson8b.c
+++ b/drivers/clk/meson/meson8b.c
@@ -2153,6 +2153,59 @@ static struct clk_regmap meson8b_vdec_hevc = {
},
};
+/* TODO: the clock at index 0 is "DDR_PLL" which we don't support yet */
+static const char * const meson8b_cts_amclk_parent_names[] = {
+ "mpll0", "mpll1", "mpll2"
+};
+
+static u32 meson8b_cts_amclk_mux_table[] = { 1, 2, 3 };
+
+static struct clk_regmap meson8b_cts_amclk_sel = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = HHI_AUD_CLK_CNTL,
+ .mask = 0x3,
+ .shift = 9,
+ .table = meson8b_cts_amclk_mux_table,
+ .flags = CLK_MUX_ROUND_CLOSEST,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "cts_amclk_sel",
+ .ops = &clk_regmap_mux_ops,
+ .parent_names = meson8b_cts_amclk_parent_names,
+ .num_parents = ARRAY_SIZE(meson8b_cts_amclk_parent_names),
+ },
+};
+
+static struct clk_regmap meson8b_cts_amclk_div = {
+ .data = &(struct clk_regmap_div_data) {
+ .offset = HHI_AUD_CLK_CNTL,
+ .shift = 0,
+ .width = 8,
+ .flags = CLK_DIVIDER_ROUND_CLOSEST,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "cts_amclk_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_names = (const char *[]){ "cts_amclk_sel" },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap meson8b_cts_amclk = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = HHI_AUD_CLK_CNTL,
+ .bit_idx = 8,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "cts_amclk",
+ .ops = &clk_regmap_gate_ops,
+ .parent_names = (const char *[]){ "cts_amclk_div" },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
/* Everything Else (EE) domain gates */
static MESON_GATE(meson8b_ddr, HHI_GCLK_MPEG0, 0);
@@ -2432,6 +2485,9 @@ static struct clk_hw_onecell_data meson8_hw_onecell_data = {
[CLKID_VDEC_HEVC_DIV] = &meson8b_vdec_hevc_div.hw,
[CLKID_VDEC_HEVC_EN] = &meson8b_vdec_hevc_en.hw,
[CLKID_VDEC_HEVC] = &meson8b_vdec_hevc.hw,
+ [CLKID_CTS_AMCLK_SEL] = &meson8b_cts_amclk_sel.hw,
+ [CLKID_CTS_AMCLK_DIV] = &meson8b_cts_amclk_div.hw,
+ [CLKID_CTS_AMCLK] = &meson8b_cts_amclk.hw,
[CLK_NR_CLKS] = NULL,
},
.num = CLK_NR_CLKS,
@@ -2641,6 +2697,9 @@ static struct clk_hw_onecell_data meson8b_hw_onecell_data = {
[CLKID_VDEC_HEVC_DIV] = &meson8b_vdec_hevc_div.hw,
[CLKID_VDEC_HEVC_EN] = &meson8b_vdec_hevc_en.hw,
[CLKID_VDEC_HEVC] = &meson8b_vdec_hevc.hw,
+ [CLKID_CTS_AMCLK_SEL] = &meson8b_cts_amclk_sel.hw,
+ [CLKID_CTS_AMCLK_DIV] = &meson8b_cts_amclk_div.hw,
+ [CLKID_CTS_AMCLK] = &meson8b_cts_amclk.hw,
[CLK_NR_CLKS] = NULL,
},
.num = CLK_NR_CLKS,
@@ -2852,6 +2911,9 @@ static struct clk_hw_onecell_data meson8m2_hw_onecell_data = {
[CLKID_VDEC_HEVC_DIV] = &meson8b_vdec_hevc_div.hw,
[CLKID_VDEC_HEVC_EN] = &meson8b_vdec_hevc_en.hw,
[CLKID_VDEC_HEVC] = &meson8b_vdec_hevc.hw,
+ [CLKID_CTS_AMCLK_SEL] = &meson8b_cts_amclk_sel.hw,
+ [CLKID_CTS_AMCLK_DIV] = &meson8b_cts_amclk_div.hw,
+ [CLKID_CTS_AMCLK] = &meson8b_cts_amclk.hw,
[CLK_NR_CLKS] = NULL,
},
.num = CLK_NR_CLKS,
@@ -3041,6 +3103,9 @@ static struct clk_regmap *const meson8b_clk_regmaps[] = {
&meson8b_vdec_hevc_div,
&meson8b_vdec_hevc_en,
&meson8b_vdec_hevc,
+ &meson8b_cts_amclk,
+ &meson8b_cts_amclk_sel,
+ &meson8b_cts_amclk_div,
};
static const struct meson8b_clk_reset_line {
diff --git a/drivers/clk/meson/meson8b.h b/drivers/clk/meson/meson8b.h
index ed37196187e6..03efa47e800f 100644
--- a/drivers/clk/meson/meson8b.h
+++ b/drivers/clk/meson/meson8b.h
@@ -30,6 +30,7 @@
#define HHI_SYS_CPU_CLK_CNTL1 0x15c /* 0x57 offset in data sheet */
#define HHI_VID_CLK_DIV 0x164 /* 0x59 offset in data sheet */
#define HHI_MPEG_CLK_CNTL 0x174 /* 0x5d offset in data sheet */
+#define HHI_AUD_CLK_CNTL 0x178 /* 0x5e offset in data sheet */
#define HHI_VID_CLK_CNTL 0x17c /* 0x5f offset in data sheet */
#define HHI_VID_CLK_CNTL2 0x194 /* 0x65 offset in data sheet */
#define HHI_VID_DIVIDER_CNTL 0x198 /* 0x66 offset in data sheet */
@@ -171,8 +172,10 @@
#define CLKID_VDEC_HEVC_SEL 203
#define CLKID_VDEC_HEVC_DIV 204
#define CLKID_VDEC_HEVC_EN 205
+#define CLKID_CTS_AMCLK_SEL 207
+#define CLKID_CTS_AMCLK_DIV 208
-#define CLK_NR_CLKS 207
+#define CLK_NR_CLKS 210
/*
* include the CLKID and RESETID that have
--
2.21.0
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
next prev parent reply other threads:[~2019-05-20 20:04 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-20 20:03 [PATCH 0/4] 32-bit Meson: audio clock support Martin Blumenstingl
2019-05-20 20:03 ` [PATCH 1/4] dt-bindings: clock: meson8b: add the audio clocks Martin Blumenstingl
2019-05-20 20:03 ` Martin Blumenstingl [this message]
2019-05-20 20:03 ` [PATCH 3/4] clk: meson: meson8b: add the cts_mclk_i958 clocks Martin Blumenstingl
2019-05-20 20:03 ` [PATCH 4/4] clk: meson: meson8b: add the cts_i958 clock Martin Blumenstingl
2019-06-11 12:33 ` [PATCH 0/4] 32-bit Meson: audio clock support Jerome Brunet
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190520200319.9265-3-martin.blumenstingl@googlemail.com \
--to=martin.blumenstingl@googlemail.com \
--cc=jbrunet@baylibre.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=narmstrong@baylibre.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).