Linux-Amlogic Archive on
 help / color / Atom feed
From: Martin Blumenstingl <>
Cc: Martin Blumenstingl <>,,
Subject: [PATCH 0/2] arm64: dts: g12a/g12b: add the Ethernet PHY GPIO IRQs
Date: Mon, 10 Jun 2019 18:45:29 +0200
Message-ID: <> (raw)

Avoid polling of the PHY status by passing the Ethernet PHY's GPIO
interrupt line to the PHY node.

I tested this successfully on my X96 Max, but I don't have an Odroid-N2
to test it there. The reset and interrupt GPIO part of the schematics
seems to be identical for both boards (and probably other "reference
design" based boards as well).

This depends on two of my other series:
1. "irqchip/meson-gpio: Add support for Meson-G12A SoC" from [0]
2. "Ethernet PHY reset GPIO updates for Amlogic SoCs" from [1]


Martin Blumenstingl (2):
  arm64: dts: meson: g12b: odroid-n2: add the Ethernet PHY interrupt
  arm64: dts: meson: g12a: x96-max: add the Ethernet PHY interrupt line

 arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts   | 4 ++++
 arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts | 4 ++++
 2 files changed, 8 insertions(+)


linux-amlogic mailing list

             reply index

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-06-10 16:45 Martin Blumenstingl [this message]
2019-06-10 16:45 ` [PATCH 1/2] arm64: dts: meson: g12b: odroid-n2: add the Ethernet PHY interrupt line Martin Blumenstingl
2019-06-14  9:16   ` Neil Armstrong
2019-06-10 16:45 ` [PATCH 2/2] arm64: dts: meson: g12a: x96-max: " Martin Blumenstingl
2019-06-14  9:20   ` Neil Armstrong

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \ \ \ \ \ \ \

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-Amlogic Archive on

Archives are clonable:
	git clone --mirror linux-amlogic/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-amlogic linux-amlogic/ \
	public-inbox-index linux-amlogic

Newsgroup available over NNTP:

AGPL code for this site: git clone public-inbox