Linux-Amlogic Archive on
 help / color / Atom feed
* [GIT PULL] clk: meson: fixes for v5.2
@ 2019-06-11 12:23 Jerome Brunet
  2019-06-12 23:02 ` Stephen Boyd
  0 siblings, 1 reply; 5+ messages in thread
From: Jerome Brunet @ 2019-06-11 12:23 UTC (permalink / raw)
  To: Stephen Boyd, Michael Turquette
  Cc: Kevin Hilman, linux-clk, open list:ARM/Amlogic Meson...

Dear clock maintainers,

Below is a request to pull a couple of fixes on Amlogic clocks for v5.2
These are typos in recently added clocks, the most annoying one being in
the DT binding identifier on the MPLL50M which is used by the network PLL.


The following changes since commit a188339ca5a396acc588e5851ed7e19f66b0ebd9:

  Linux 5.2-rc1 (2019-05-19 15:47:09 -0700)

are available in the Git repository at:

  git:// tags/clk-meson-5.2-1-fixes

for you to fetch changes up to 3ff46efbcd90d3d469de8eddaf03d12293aaa50c:

  clk: meson: meson8b: fix a typo in the VPU parent names array variable (2019-05-20 12:11:08 +0200)

MPLL50M DT bindings typo fix
Meson9 VPU typo fixes

Jerome Brunet (1):
      clk: meson: fix MPLL 50M binding id typo

Martin Blumenstingl (1):
      clk: meson: meson8b: fix a typo in the VPU parent names array variable

 drivers/clk/meson/g12a.c              |  4 ++--
 drivers/clk/meson/g12a.h              |  2 +-
 drivers/clk/meson/meson8b.c           | 10 +++++-----
 include/dt-bindings/clock/g12a-clkc.h |  2 +-
 4 files changed, 9 insertions(+), 9 deletions(-)

linux-amlogic mailing list

^ permalink raw reply	[flat|nested] 5+ messages in thread

end of thread, back to index

Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-06-11 12:23 [GIT PULL] clk: meson: fixes for v5.2 Jerome Brunet
2019-06-12 23:02 ` Stephen Boyd
2019-06-13  8:19   ` Jerome Brunet
2019-06-13 19:07     ` Kevin Hilman
2019-06-13 20:48       ` Stephen Boyd

Linux-Amlogic Archive on

Archives are clonable:
	git clone --mirror linux-amlogic/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-amlogic linux-amlogic/ \
	public-inbox-index linux-amlogic

Example config snippet for mirrors

Newsgroup available over NNTP:

AGPL code for this site: git clone public-inbox