Linux-Amlogic Archive on lore.kernel.org
 help / color / Atom feed
From: Neil Armstrong <narmstrong@baylibre.com>
To: balbi@kernel.org
Cc: Neil Armstrong <narmstrong@baylibre.com>,
	Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
	linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-amlogic@lists.infradead.org,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2] usb: dwc3: meson-g12a: Add support for IRQ based OTG switching
Date: Fri, 14 Jun 2019 10:58:24 +0200
Message-ID: <20190614085824.23307-1-narmstrong@baylibre.com> (raw)

Add support for the OTG ID change interrupt to switch between Host
and Device mode.

Tested on the Hardkernel Odroid-N2 board.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
 drivers/usb/dwc3/dwc3-meson-g12a.c | 36 +++++++++++++++++++++++++-----
 1 file changed, 31 insertions(+), 5 deletions(-)

diff --git a/drivers/usb/dwc3/dwc3-meson-g12a.c b/drivers/usb/dwc3/dwc3-meson-g12a.c
index 2aec31a2eacb..bca7e92a10e9 100644
--- a/drivers/usb/dwc3/dwc3-meson-g12a.c
+++ b/drivers/usb/dwc3/dwc3-meson-g12a.c
@@ -11,9 +11,7 @@
  * - Control registers for each USB2 Ports
  * - Control registers for the USB PHY layer
  * - SuperSpeed PHY can be enabled only if port is used
- *
- * TOFIX:
- * - Add dynamic OTG switching with ID change interrupt
+ * - Dynamic OTG switching with ID change interrupt
  */
 
 #include <linux/module.h>
@@ -348,6 +346,22 @@ static enum usb_role dwc3_meson_g12a_role_get(struct device *dev)
 		USB_ROLE_HOST : USB_ROLE_DEVICE;
 }
 
+static irqreturn_t dwc3_meson_g12a_irq_thread(int irq, void *data)
+{
+	struct dwc3_meson_g12a *priv = data;
+	enum phy_mode otg_id;
+
+	otg_id = dwc3_meson_g12a_get_id(priv);
+	if (otg_id != priv->otg_phy_mode) {
+		if (dwc3_meson_g12a_otg_mode_set(priv, otg_id))
+			dev_warn(priv->dev, "Failed to switch OTG mode\n");
+	}
+
+	regmap_update_bits(priv->regmap, USB_R5, USB_R5_ID_DIG_IRQ, 0);
+
+	return IRQ_HANDLED;
+}
+
 static struct device *dwc3_meson_g12_find_child(struct device *dev,
 						const char *compatible)
 {
@@ -374,7 +388,7 @@ static int dwc3_meson_g12a_probe(struct platform_device *pdev)
 	void __iomem *base;
 	struct resource *res;
 	enum phy_mode otg_id;
-	int ret, i;
+	int ret, i, irq;
 
 	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
 	if (!priv)
@@ -436,6 +450,19 @@ static int dwc3_meson_g12a_probe(struct platform_device *pdev)
 	/* Get dr_mode */
 	priv->otg_mode = usb_get_dr_mode(dev);
 
+	if (priv->otg_mode == USB_DR_MODE_OTG) {
+		/* Ack irq before registering */
+		regmap_update_bits(priv->regmap, USB_R5,
+				   USB_R5_ID_DIG_IRQ, 0);
+
+		irq = platform_get_irq(pdev, 0);
+		ret = devm_request_threaded_irq(&pdev->dev, irq, NULL,
+						dwc3_meson_g12a_irq_thread,
+						IRQF_ONESHOT, pdev->name, priv);
+		if (ret)
+			return ret;
+	}
+
 	dwc3_meson_g12a_usb_init(priv);
 
 	/* Init PHYs */
@@ -460,7 +487,6 @@ static int dwc3_meson_g12a_probe(struct platform_device *pdev)
 
 	/* Setup OTG mode corresponding to the ID pin */
 	if (priv->otg_mode == USB_DR_MODE_OTG) {
-		/* TOFIX Handle ID mode toggling via IRQ */
 		otg_id = dwc3_meson_g12a_get_id(priv);
 		if (otg_id != priv->otg_phy_mode) {
 			if (dwc3_meson_g12a_otg_mode_set(priv, otg_id))
-- 
2.21.0


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

                 reply index

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190614085824.23307-1-narmstrong@baylibre.com \
    --to=narmstrong@baylibre.com \
    --cc=balbi@kernel.org \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=martin.blumenstingl@googlemail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-Amlogic Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-amlogic/0 linux-amlogic/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-amlogic linux-amlogic/ https://lore.kernel.org/linux-amlogic \
		linux-amlogic@lists.infradead.org linux-amlogic@archiver.kernel.org
	public-inbox-index linux-amlogic

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-amlogic


AGPL code for this site: git clone https://public-inbox.org/ public-inbox