Linux-Amlogic Archive on lore.kernel.org
 help / color / Atom feed
From: Jerome Brunet <jbrunet@baylibre.com>
To: Neil Armstrong <narmstrong@baylibre.com>
Cc: Kevin Hilman <khilman@baylibre.com>,
	linux-amlogic@lists.infradead.org, linux-clk@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	Jerome Brunet <jbrunet@baylibre.com>
Subject: [PATCH 2/2] clk: meson: axg-audio: add g12a reset support
Date: Wed,  3 Jul 2019 14:26:14 +0200
Message-ID: <20190703122614.3579-3-jbrunet@baylibre.com> (raw)
In-Reply-To: <20190703122614.3579-1-jbrunet@baylibre.com>

On the g12a, the register space dedicated to the audio clock also
provides some resets. Let the clock controller register a reset
provider as well for this SoC family.

the axg SoC family does not appear to provide this feature.

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
 drivers/clk/meson/axg-audio.c | 107 +++++++++++++++++++++++++++++++++-
 drivers/clk/meson/axg-audio.h |   1 +
 2 files changed, 106 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/meson/axg-audio.c b/drivers/clk/meson/axg-audio.c
index 8028ff6f6610..ce163bd03aad 100644
--- a/drivers/clk/meson/axg-audio.c
+++ b/drivers/clk/meson/axg-audio.c
@@ -12,6 +12,7 @@
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include <linux/reset.h>
+#include <linux/reset-controller.h>
 #include <linux/slab.h>
 
 #include "axg-audio.h"
@@ -916,6 +917,84 @@ static int axg_register_clk_hw_inputs(struct device *dev,
 	return 0;
 }
 
+struct axg_audio_reset_data {
+	struct reset_controller_dev rstc;
+	struct regmap *map;
+	unsigned int offset;
+};
+
+static void axg_audio_reset_reg_and_bit(struct axg_audio_reset_data *rst,
+					unsigned long id,
+					unsigned int *reg,
+					unsigned int *bit)
+{
+	unsigned int stride = regmap_get_reg_stride(rst->map);
+
+	*reg = (id / (stride * BITS_PER_BYTE)) * stride;
+	*reg += rst->offset;
+	*bit = id % (stride * BITS_PER_BYTE);
+}
+
+static int axg_audio_reset_update(struct reset_controller_dev *rcdev,
+				unsigned long id, bool assert)
+{
+	struct axg_audio_reset_data *rst =
+		container_of(rcdev, struct axg_audio_reset_data, rstc);
+	unsigned int offset, bit;
+
+	axg_audio_reset_reg_and_bit(rst, id, &offset, &bit);
+
+	regmap_update_bits(rst->map, offset, BIT(bit),
+			assert ? BIT(bit) : 0);
+
+	return 0;
+}
+
+static int axg_audio_reset_status(struct reset_controller_dev *rcdev,
+				unsigned long id)
+{
+	struct axg_audio_reset_data *rst =
+		container_of(rcdev, struct axg_audio_reset_data, rstc);
+	unsigned int val, offset, bit;
+
+	axg_audio_reset_reg_and_bit(rst, id, &offset, &bit);
+
+	regmap_read(rst->map, offset, &val);
+
+	return !!(val & BIT(bit));
+}
+
+static int axg_audio_reset_assert(struct reset_controller_dev *rcdev,
+				unsigned long id)
+{
+	return axg_audio_reset_update(rcdev, id, true);
+}
+
+static int axg_audio_reset_deassert(struct reset_controller_dev *rcdev,
+				unsigned long id)
+{
+	return axg_audio_reset_update(rcdev, id, false);
+}
+
+static int axg_audio_reset_toggle(struct reset_controller_dev *rcdev,
+				unsigned long id)
+{
+	int ret;
+
+	ret = axg_audio_reset_assert(rcdev, id);
+	if (ret)
+		return ret;
+
+	return axg_audio_reset_deassert(rcdev, id);
+}
+
+static const struct reset_control_ops axg_audio_rstc_ops = {
+	.assert = axg_audio_reset_assert,
+	.deassert = axg_audio_reset_deassert,
+	.reset = axg_audio_reset_toggle,
+	.status = axg_audio_reset_status,
+};
+
 static const struct regmap_config axg_audio_regmap_cfg = {
 	.reg_bits	= 32,
 	.val_bits	= 32,
@@ -925,12 +1004,15 @@ static const struct regmap_config axg_audio_regmap_cfg = {
 
 struct audioclk_data {
 	struct clk_hw_onecell_data *hw_onecell_data;
+	unsigned int reset_offset;
+	unsigned int reset_num;
 };
 
 static int axg_audio_clkc_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	const struct audioclk_data *data;
+	struct axg_audio_reset_data *rst;
 	struct regmap *map;
 	struct resource *res;
 	void __iomem *regs;
@@ -1005,8 +1087,27 @@ static int axg_audio_clkc_probe(struct platform_device *pdev)
 		}
 	}
 
-	return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get,
-					   data->hw_onecell_data);
+	ret = devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get,
+					data->hw_onecell_data);
+	if (ret)
+		return ret;
+
+	/* Stop here if there is no reset */
+	if (!data->reset_num)
+		return 0;
+
+	rst = devm_kzalloc(dev, sizeof(*rst), GFP_KERNEL);
+	if (!rst)
+		return -ENOMEM;
+
+	rst->map = map;
+	rst->offset = data->reset_offset;
+	rst->rstc.nr_resets = data->reset_num;
+	rst->rstc.ops = &axg_audio_rstc_ops;
+	rst->rstc.of_node = dev->of_node;
+	rst->rstc.owner = THIS_MODULE;
+
+	return ret = devm_reset_controller_register(dev, &rst->rstc);
 }
 
 static const struct audioclk_data axg_audioclk_data = {
@@ -1015,6 +1116,8 @@ static const struct audioclk_data axg_audioclk_data = {
 
 static const struct audioclk_data g12a_audioclk_data = {
 	.hw_onecell_data = &g12a_audio_hw_onecell_data,
+	.reset_offset = AUDIO_SW_RESET,
+	.reset_num = 26,
 };
 
 static const struct of_device_id clkc_match_table[] = {
diff --git a/drivers/clk/meson/axg-audio.h b/drivers/clk/meson/axg-audio.h
index 5d972d55d6c7..c00e28b2e1a9 100644
--- a/drivers/clk/meson/axg-audio.h
+++ b/drivers/clk/meson/axg-audio.h
@@ -22,6 +22,7 @@
 #define AUDIO_MCLK_F_CTRL	0x018
 #define AUDIO_MST_PAD_CTRL0	0x01c
 #define AUDIO_MST_PAD_CTRL1	0x020
+#define AUDIO_SW_RESET		0x024
 #define AUDIO_MST_A_SCLK_CTRL0	0x040
 #define AUDIO_MST_A_SCLK_CTRL1	0x044
 #define AUDIO_MST_B_SCLK_CTRL0	0x048
-- 
2.21.0


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

      parent reply index

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-07-03 12:26 [PATCH 0/2] clk: meson: axg-audio: add " Jerome Brunet
2019-07-03 12:26 ` [PATCH 1/2] dt-bindings: clock: meson: add resets to the audio clock controller Jerome Brunet
2019-07-03 12:26 ` Jerome Brunet [this message]

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190703122614.3579-3-jbrunet@baylibre.com \
    --to=jbrunet@baylibre.com \
    --cc=khilman@baylibre.com \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=narmstrong@baylibre.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-Amlogic Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-amlogic/0 linux-amlogic/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-amlogic linux-amlogic/ https://lore.kernel.org/linux-amlogic \
		linux-amlogic@lists.infradead.org linux-amlogic@archiver.kernel.org
	public-inbox-index linux-amlogic


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-amlogic


AGPL code for this site: git clone https://public-inbox.org/ public-inbox