From: Neil Armstrong <narmstrong@baylibre.com>
To: khilman@baylibre.com
Cc: linux-amlogic@lists.infradead.org, christianshewitt@gmail.com,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Neil Armstrong <narmstrong@baylibre.com>
Subject: [PATCH 0/6] arm64: add support for the Khadas VIM3
Date: Wed, 31 Jul 2019 14:39:54 +0200 [thread overview]
Message-ID: <20190731124000.22072-1-narmstrong@baylibre.com> (raw)
The Khadas VIM3 uses the Amlogic S922X or A311S SoC, both based on the
Amlogic G12B SoC family, on a board with the same form factor as the
VIM/VIM2 models. It ships in two variants; basic and
pro which differ in RAM and eMMC size:
- 2GB (basic) or 4GB (pro) LPDDR4 RAM
- 16GB (basic) or 32GB (pro) eMMC 5.1 storage
- 16MB SPI flash
- 10/100/1000 Base-T Ethernet
- AP6398S Wireless (802.11 a/b/g/n/ac, BT5.0)
- HDMI 2.1 video
- 1x USB 2.0 + 1x USB 3.0 ports
- 1x USB-C (power) with USB 2.0 OTG
- 3x LED's (1x red, 1x blue, 1x white)
- 3x buttons (power, function, reset)
- IR receiver
- M2 socket with PCIe, USB, ADC & I2C
- 40pin GPIO Header
- 1x micro SD card slot
First of all, the S922X and A311D are now specified since they differ
by some HW features and the capable operating points.
A common meson-g12b-khadas-vim3.dtsi is added to support both S922X and
A311D SoCs supported by two variants of the board.
Odroid-N2 is changed to use the s922x.dtsi include.
Dependencies:
- patch 5 & 6: "arm64: g12a: add support for DVFS" at [1]
[1] https://patchwork.kernel.org/cover/11063837/
Christian Hewitt (4):
soc: amlogic: meson-gx-socinfo: add A311D id
dt-bindings: arm: amlogic: add support for the Khadas VIM3
arm64: dts: meson-g12b: support a311d and s922x cpu operating points
arm64: dts: meson-g12b-khadas-vim3: add initial device-tree
Neil Armstrong (2):
dt-bindings: arm: amlogic: add bindings for G12B based S922X SoC
dt-bindings: arm: amlogic: add bindings for the Amlogic G12B based
A311D SoC
.../devicetree/bindings/arm/amlogic.yaml | 9 +
arch/arm64/boot/dts/amlogic/Makefile | 2 +
.../amlogic/meson-g12b-a311d-khadas-vim3.dts | 15 +
.../boot/dts/amlogic/meson-g12b-a311d.dtsi | 149 +++++
.../dts/amlogic/meson-g12b-khadas-vim3.dtsi | 542 ++++++++++++++++++
.../boot/dts/amlogic/meson-g12b-odroid-n2.dts | 2 +-
.../amlogic/meson-g12b-s922x-khadas-vim3.dts | 15 +
.../boot/dts/amlogic/meson-g12b-s922x.dtsi | 124 ++++
arch/arm64/boot/dts/amlogic/meson-g12b.dtsi | 115 ----
drivers/soc/amlogic/meson-gx-socinfo.c | 1 +
10 files changed, 858 insertions(+), 116 deletions(-)
create mode 100644 arch/arm64/boot/dts/amlogic/meson-g12b-a311d-khadas-vim3.dts
create mode 100644 arch/arm64/boot/dts/amlogic/meson-g12b-a311d.dtsi
create mode 100644 arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi
create mode 100644 arch/arm64/boot/dts/amlogic/meson-g12b-s922x-khadas-vim3.dts
create mode 100644 arch/arm64/boot/dts/amlogic/meson-g12b-s922x.dtsi
--
2.22.0
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
next reply other threads:[~2019-07-31 12:43 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-31 12:39 Neil Armstrong [this message]
2019-07-31 12:39 ` [PATCH 1/6] soc: amlogic: meson-gx-socinfo: add A311D id Neil Armstrong
2019-08-05 21:47 ` Kevin Hilman
2019-07-31 12:39 ` [PATCH 2/6] dt-bindings: arm: amlogic: add bindings for G12B based S922X SoC Neil Armstrong
2019-07-31 16:54 ` Rob Herring
2019-08-05 21:46 ` Kevin Hilman
2019-08-05 22:21 ` Rob Herring
2019-08-05 22:26 ` Rob Herring
2019-08-08 3:02 ` Kevin Hilman
2019-07-31 12:39 ` [PATCH 3/6] dt-bindings: arm: amlogic: add bindings for the Amlogic G12B based A311D SoC Neil Armstrong
2019-07-31 16:55 ` Rob Herring
2019-07-31 12:39 ` [PATCH 4/6] dt-bindings: arm: amlogic: add support for the Khadas VIM3 Neil Armstrong
2019-07-31 16:55 ` Rob Herring
2019-07-31 12:39 ` [PATCH 5/6] arm64: dts: meson-g12b: support a311d and s922x cpu operating points Neil Armstrong
2019-07-31 12:40 ` [PATCH 6/6] arm64: dts: meson-g12b-khadas-vim3: add initial device-tree Neil Armstrong
2019-08-03 18:50 ` Martin Blumenstingl
2019-08-06 15:48 ` Neil Armstrong
2019-08-08 17:57 ` [PATCH 0/6] arm64: add support for the Khadas VIM3 Kevin Hilman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190731124000.22072-1-narmstrong@baylibre.com \
--to=narmstrong@baylibre.com \
--cc=christianshewitt@gmail.com \
--cc=khilman@baylibre.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).