From: Neil Armstrong <narmstrong@baylibre.com>
To: khilman@baylibre.com
Cc: linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Neil Armstrong <narmstrong@baylibre.com>
Subject: [PATCH 0/6] arm64: Add support for Amlogic SM1 SoC Family
Date: Tue, 20 Aug 2019 16:40:46 +0200 [thread overview]
Message-ID: <20190820144052.18269-1-narmstrong@baylibre.com> (raw)
The new Amlogic SM1 SoC Family is a derivative of the Amlogic G12A
SoC Family, with the following changes :
- Cortex-A55 cores instead of A53
- more power domains, including USB & PCIe
- a neural network co-processor (NNA)
- a CSI input and image processor
- some changes in the audio complex, thus not yet enabled
- new clocks, for NNA, CSI and a clock tree for each CPU Core
This serie does not add support for NNA, CSI, Audio, USB, Display
or DVFS, it only aligns with the current G12A Support.
With this serie, the SEI610 Board has supported :
- Default-boot CPU frequency
- Ethernet
- LEDs
- IR
- GPIO Buttons
- eMMC
- SDCard
- SDIO WiFi
- UART Bluetooth
Audio (HDMI, Embedded HP, MIcs), USB, HDMI, IR Output, & RGB Led
would be supported in following patchsets.
Dependencies:
- g12-common.dtsi from the DVFS patchset at [1]
Changes from rfc at [2]:
- Removed Power domain patches & display/USB support, will resend separately
- Removed applied AO-CEC patches
- Fixed clk-measure IDs
- Collected reviewed-by tags
[1] https://patchwork.kernel.org/cover/11025309/
[2] https://patchwork.kernel.org/cover/11025511/
Neil Armstrong (6):
soc: amlogic: meson-gx-socinfo: Add SM1 and S905X3 IDs
dt-bindings: soc: amlogic: clk-measure: Add SM1 compatible
soc: amlogic: clk-measure: Add support for SM1
dt-bindings: arm: amlogic: add SM1 bindings
dt-bindings: arm: amlogic: add SEI Robotics SEI610 bindings
arm64: dts: add support for SM1 based SEI Robotics SEI610
.../devicetree/bindings/arm/amlogic.yaml | 5 +
.../bindings/soc/amlogic/clk-measure.txt | 1 +
arch/arm64/boot/dts/amlogic/Makefile | 1 +
.../boot/dts/amlogic/meson-sm1-sei610.dts | 300 ++++++++++++++++++
arch/arm64/boot/dts/amlogic/meson-sm1.dtsi | 68 ++++
drivers/soc/amlogic/meson-clk-measure.c | 134 ++++++++
drivers/soc/amlogic/meson-gx-socinfo.c | 2 +
7 files changed, 511 insertions(+)
create mode 100644 arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
create mode 100644 arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
--
2.22.0
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
next reply other threads:[~2019-08-20 14:42 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-20 14:40 Neil Armstrong [this message]
2019-08-20 14:40 ` [PATCH 1/6] soc: amlogic: meson-gx-socinfo: Add SM1 and S905X3 IDs Neil Armstrong
2019-08-20 14:40 ` [PATCH 2/6] dt-bindings: soc: amlogic: clk-measure: Add SM1 compatible Neil Armstrong
2019-08-20 14:40 ` [PATCH 3/6] soc: amlogic: clk-measure: Add support for SM1 Neil Armstrong
2019-08-20 14:40 ` [PATCH 4/6] dt-bindings: arm: amlogic: add SM1 bindings Neil Armstrong
2019-08-20 16:15 ` Rob Herring
2019-08-20 14:40 ` [PATCH 5/6] dt-bindings: arm: amlogic: add SEI Robotics SEI610 bindings Neil Armstrong
2019-08-20 16:16 ` Rob Herring
2019-08-20 14:40 ` [PATCH 6/6] arm64: dts: add support for SM1 based SEI Robotics SEI610 Neil Armstrong
2019-08-20 20:11 ` Martin Blumenstingl
2019-08-20 20:32 ` Kevin Hilman
2019-08-20 19:25 ` [PATCH 0/6] arm64: Add support for Amlogic SM1 SoC Family Kevin Hilman
2019-08-20 23:06 ` Kevin Hilman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190820144052.18269-1-narmstrong@baylibre.com \
--to=narmstrong@baylibre.com \
--cc=khilman@baylibre.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).