From: Jerome Brunet <jbrunet@baylibre.com>
To: Mark Brown <broonie@kernel.org>, Liam Girdwood <lgirdwood@gmail.com>
Cc: devicetree@vger.kernel.org, alsa-devel@alsa-project.org,
Kevin Hilman <khilman@baylibre.com>,
linux-kernel@vger.kernel.org, linux-amlogic@lists.infradead.org,
Jerome Brunet <jbrunet@baylibre.com>
Subject: [PATCH 8/8] ASoC: meson: tdmout: add sm1 support
Date: Thu, 5 Sep 2019 14:01:20 +0200 [thread overview]
Message-ID: <20190905120120.31752-9-jbrunet@baylibre.com> (raw)
In-Reply-To: <20190905120120.31752-1-jbrunet@baylibre.com>
On the sm1, the TDMOUT number of input is extended and the
the gain enable bit moved to accommodate this extension
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
sound/soc/meson/axg-tdmout.c | 103 ++++++++++++++++++++++++++++-------
1 file changed, 84 insertions(+), 19 deletions(-)
diff --git a/sound/soc/meson/axg-tdmout.c b/sound/soc/meson/axg-tdmout.c
index 86537fc0ecb5..418ec314b37d 100644
--- a/sound/soc/meson/axg-tdmout.c
+++ b/sound/soc/meson/axg-tdmout.c
@@ -24,6 +24,7 @@
#define TDMOUT_CTRL1 0x04
#define TDMOUT_CTRL1_TYPE_MASK GENMASK(6, 4)
#define TDMOUT_CTRL1_TYPE(x) ((x) << 4)
+#define SM1_TDMOUT_CTRL1_GAIN_EN 7
#define TDMOUT_CTRL1_MSB_POS_MASK GENMASK(12, 8)
#define TDMOUT_CTRL1_MSB_POS(x) ((x) << 8)
#define TDMOUT_CTRL1_SEL_SHIFT 24
@@ -51,25 +52,6 @@ static const struct regmap_config axg_tdmout_regmap_cfg = {
.max_register = TDMOUT_MASK_VAL,
};
-static const struct snd_kcontrol_new axg_tdmout_controls[] = {
- SOC_DOUBLE("Lane 0 Volume", TDMOUT_GAIN0, 0, 8, 255, 0),
- SOC_DOUBLE("Lane 1 Volume", TDMOUT_GAIN0, 16, 24, 255, 0),
- SOC_DOUBLE("Lane 2 Volume", TDMOUT_GAIN1, 0, 8, 255, 0),
- SOC_DOUBLE("Lane 3 Volume", TDMOUT_GAIN1, 16, 24, 255, 0),
- SOC_SINGLE("Gain Enable Switch", TDMOUT_CTRL1,
- TDMOUT_CTRL1_GAIN_EN, 1, 0),
-};
-
-static const char * const tdmout_sel_texts[] = {
- "IN 0", "IN 1", "IN 2",
-};
-
-static SOC_ENUM_SINGLE_DECL(axg_tdmout_sel_enum, TDMOUT_CTRL1,
- TDMOUT_CTRL1_SEL_SHIFT, tdmout_sel_texts);
-
-static const struct snd_kcontrol_new axg_tdmout_in_mux =
- SOC_DAPM_ENUM("Input Source", axg_tdmout_sel_enum);
-
static struct snd_soc_dai *
axg_tdmout_get_be(struct snd_soc_dapm_widget *w)
{
@@ -197,6 +179,25 @@ static int axg_tdmout_prepare(struct regmap *map,
return axg_tdm_formatter_set_channel_masks(map, ts, TDMOUT_MASK0);
}
+static const struct snd_kcontrol_new axg_tdmout_controls[] = {
+ SOC_DOUBLE("Lane 0 Volume", TDMOUT_GAIN0, 0, 8, 255, 0),
+ SOC_DOUBLE("Lane 1 Volume", TDMOUT_GAIN0, 16, 24, 255, 0),
+ SOC_DOUBLE("Lane 2 Volume", TDMOUT_GAIN1, 0, 8, 255, 0),
+ SOC_DOUBLE("Lane 3 Volume", TDMOUT_GAIN1, 16, 24, 255, 0),
+ SOC_SINGLE("Gain Enable Switch", TDMOUT_CTRL1,
+ TDMOUT_CTRL1_GAIN_EN, 1, 0),
+};
+
+static const char * const axg_tdmout_sel_texts[] = {
+ "IN 0", "IN 1", "IN 2",
+};
+
+static SOC_ENUM_SINGLE_DECL(axg_tdmout_sel_enum, TDMOUT_CTRL1,
+ TDMOUT_CTRL1_SEL_SHIFT, axg_tdmout_sel_texts);
+
+static const struct snd_kcontrol_new axg_tdmout_in_mux =
+ SOC_DAPM_ENUM("Input Source", axg_tdmout_sel_enum);
+
static const struct snd_soc_dapm_widget axg_tdmout_dapm_widgets[] = {
SND_SOC_DAPM_AIF_IN("IN 0", NULL, 0, SND_SOC_NOPM, 0, 0),
SND_SOC_DAPM_AIF_IN("IN 1", NULL, 0, SND_SOC_NOPM, 0, 0),
@@ -252,6 +253,67 @@ static const struct axg_tdm_formatter_driver g12a_tdmout_drv = {
},
};
+static const struct snd_kcontrol_new sm1_tdmout_controls[] = {
+ SOC_DOUBLE("Lane 0 Volume", TDMOUT_GAIN0, 0, 8, 255, 0),
+ SOC_DOUBLE("Lane 1 Volume", TDMOUT_GAIN0, 16, 24, 255, 0),
+ SOC_DOUBLE("Lane 2 Volume", TDMOUT_GAIN1, 0, 8, 255, 0),
+ SOC_DOUBLE("Lane 3 Volume", TDMOUT_GAIN1, 16, 24, 255, 0),
+ SOC_SINGLE("Gain Enable Switch", TDMOUT_CTRL1,
+ SM1_TDMOUT_CTRL1_GAIN_EN, 1, 0),
+};
+
+static const char * const sm1_tdmout_sel_texts[] = {
+ "IN 0", "IN 1", "IN 2", "IN 3", "IN 4",
+};
+
+static SOC_ENUM_SINGLE_DECL(sm1_tdmout_sel_enum, TDMOUT_CTRL1,
+ TDMOUT_CTRL1_SEL_SHIFT, sm1_tdmout_sel_texts);
+
+static const struct snd_kcontrol_new sm1_tdmout_in_mux =
+ SOC_DAPM_ENUM("Input Source", sm1_tdmout_sel_enum);
+
+static const struct snd_soc_dapm_widget sm1_tdmout_dapm_widgets[] = {
+ SND_SOC_DAPM_AIF_IN("IN 0", NULL, 0, SND_SOC_NOPM, 0, 0),
+ SND_SOC_DAPM_AIF_IN("IN 1", NULL, 0, SND_SOC_NOPM, 0, 0),
+ SND_SOC_DAPM_AIF_IN("IN 2", NULL, 0, SND_SOC_NOPM, 0, 0),
+ SND_SOC_DAPM_AIF_IN("IN 3", NULL, 0, SND_SOC_NOPM, 0, 0),
+ SND_SOC_DAPM_AIF_IN("IN 4", NULL, 0, SND_SOC_NOPM, 0, 0),
+ SND_SOC_DAPM_MUX("SRC SEL", SND_SOC_NOPM, 0, 0, &sm1_tdmout_in_mux),
+ SND_SOC_DAPM_PGA_E("ENC", SND_SOC_NOPM, 0, 0, NULL, 0,
+ axg_tdm_formatter_event,
+ (SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_PRE_PMD)),
+ SND_SOC_DAPM_AIF_OUT("OUT", NULL, 0, SND_SOC_NOPM, 0, 0),
+};
+
+static const struct snd_soc_dapm_route sm1_tdmout_dapm_routes[] = {
+ { "SRC SEL", "IN 0", "IN 0" },
+ { "SRC SEL", "IN 1", "IN 1" },
+ { "SRC SEL", "IN 2", "IN 2" },
+ { "SRC SEL", "IN 3", "IN 3" },
+ { "SRC SEL", "IN 4", "IN 4" },
+ { "ENC", NULL, "SRC SEL" },
+ { "OUT", NULL, "ENC" },
+};
+
+static const struct snd_soc_component_driver sm1_tdmout_component_drv = {
+ .controls = sm1_tdmout_controls,
+ .num_controls = ARRAY_SIZE(sm1_tdmout_controls),
+ .dapm_widgets = sm1_tdmout_dapm_widgets,
+ .num_dapm_widgets = ARRAY_SIZE(sm1_tdmout_dapm_widgets),
+ .dapm_routes = sm1_tdmout_dapm_routes,
+ .num_dapm_routes = ARRAY_SIZE(sm1_tdmout_dapm_routes),
+};
+
+static const struct axg_tdm_formatter_driver sm1_tdmout_drv = {
+ .component_drv = &sm1_tdmout_component_drv,
+ .regmap_cfg = &axg_tdmout_regmap_cfg,
+ .ops = &axg_tdmout_ops,
+ .quirks = &(const struct axg_tdm_formatter_hw) {
+ .invert_sclk = true,
+ .skew_offset = 2,
+ },
+};
+
static const struct of_device_id axg_tdmout_of_match[] = {
{
.compatible = "amlogic,axg-tdmout",
@@ -259,6 +321,9 @@ static const struct of_device_id axg_tdmout_of_match[] = {
}, {
.compatible = "amlogic,g12a-tdmout",
.data = &g12a_tdmout_drv,
+ }, {
+ .compatible = "amlogic,sm1-tdmout",
+ .data = &sm1_tdmout_drv,
}, {}
};
MODULE_DEVICE_TABLE(of, axg_tdmout_of_match);
--
2.21.0
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
next prev parent reply other threads:[~2019-09-05 12:01 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-05 12:01 [PATCH 0/8] ASoC: meson: add sm1 support Jerome Brunet
2019-09-05 12:01 ` [PATCH 1/8] ASoC: meson: add sm1 compatibles Jerome Brunet
2019-09-05 17:38 ` Applied "ASoC: meson: add sm1 compatibles" to the asoc tree Mark Brown
2019-09-05 12:01 ` [PATCH 2/8] ASoC: meson: add reset binding Jerome Brunet
2019-09-05 17:38 ` Applied "ASoC: meson: add reset binding" to the asoc tree Mark Brown
2019-09-05 12:01 ` [PATCH 3/8] ASoC: meson: axg-frddr: expose all 8 outputs Jerome Brunet
2019-09-05 17:38 ` Applied "ASoC: meson: axg-frddr: expose all 8 outputs" to the asoc tree Mark Brown
2019-09-05 12:01 ` [PATCH 4/8] ASoC: meson: axg-toddr: expose all 8 inputs Jerome Brunet
2019-09-05 17:38 ` Applied "ASoC: meson: axg-toddr: expose all 8 inputs" to the asoc tree Mark Brown
2019-09-05 12:01 ` [PATCH 5/8] ASoC: meson: tdmin: expose all 16 inputs Jerome Brunet
2019-09-05 17:38 ` Applied "ASoC: meson: tdmin: expose all 16 inputs" to the asoc tree Mark Brown
2019-09-05 12:01 ` [PATCH 6/8] ASoC: meson: axg-frddr: add sm1 support Jerome Brunet
2019-09-05 17:38 ` Applied "ASoC: meson: axg-frddr: add sm1 support" to the asoc tree Mark Brown
2019-09-05 12:01 ` [PATCH 7/8] ASoC: meson: axg-toddr: add sm1 support Jerome Brunet
2019-09-05 17:38 ` Applied "ASoC: meson: axg-toddr: add sm1 support" to the asoc tree Mark Brown
2019-09-05 12:01 ` Jerome Brunet [this message]
2019-09-05 17:38 ` Applied "ASoC: meson: tdmout: " Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190905120120.31752-9-jbrunet@baylibre.com \
--to=jbrunet@baylibre.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=khilman@baylibre.com \
--cc=lgirdwood@gmail.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).