linux-amlogic.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Neil Armstrong <narmstrong@baylibre.com>
To: khilman@baylibre.com, lorenzo.pieralisi@arm.com, kishon@ti.com,
	bhelgaas@google.com, andrew.murray@arm.com
Cc: gouwa@khadas.com, Neil Armstrong <narmstrong@baylibre.com>,
	linux-pci@vger.kernel.org, nick@khadas.com,
	linux-kernel@vger.kernel.org, yue.wang@Amlogic.com,
	repk@triplefau.lt, maz@kernel.org,
	linux-amlogic@lists.infradead.org,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 3/6] PCI: amlogic: meson: Add support for G12A
Date: Mon, 16 Sep 2019 14:50:19 +0200	[thread overview]
Message-ID: <20190916125022.10754-4-narmstrong@baylibre.com> (raw)
In-Reply-To: <20190916125022.10754-1-narmstrong@baylibre.com>

Add support for the Amlogic G12A SoC using a separate shared PHY.

This adds support for fetching a PHY phandle and call the PHY init,
reset and power on/off calls instead of writing in the PHY register or
toggling the PHY reset line.

The MIPI clock and the PHY memory resource are only required for the
Amlogic AXG SoC PCIe PHY setup, thus these elements are ignored for
the Amlogic G12A having a separate shared PHY.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 drivers/pci/controller/dwc/pci-meson.c | 128 ++++++++++++++++++++-----
 1 file changed, 105 insertions(+), 23 deletions(-)

diff --git a/drivers/pci/controller/dwc/pci-meson.c b/drivers/pci/controller/dwc/pci-meson.c
index ab79990798f8..3772b02a5c55 100644
--- a/drivers/pci/controller/dwc/pci-meson.c
+++ b/drivers/pci/controller/dwc/pci-meson.c
@@ -16,6 +16,7 @@
 #include <linux/reset.h>
 #include <linux/resource.h>
 #include <linux/types.h>
+#include <linux/phy/phy.h>
 
 #include "pcie-designware.h"
 
@@ -96,12 +97,18 @@ struct meson_pcie_rc_reset {
 	struct reset_control *apb;
 };
 
+struct meson_pcie_param {
+	bool has_shared_phy;
+};
+
 struct meson_pcie {
 	struct dw_pcie pci;
 	struct meson_pcie_mem_res mem_res;
 	struct meson_pcie_clk_res clk_res;
 	struct meson_pcie_rc_reset mrst;
 	struct gpio_desc *reset_gpio;
+	struct phy *phy;
+	const struct meson_pcie_param *param;
 };
 
 static struct reset_control *meson_pcie_get_reset(struct meson_pcie *mp,
@@ -123,10 +130,12 @@ static int meson_pcie_get_resets(struct meson_pcie *mp)
 {
 	struct meson_pcie_rc_reset *mrst = &mp->mrst;
 
-	mrst->phy = meson_pcie_get_reset(mp, "phy", PCIE_SHARED_RESET);
-	if (IS_ERR(mrst->phy))
-		return PTR_ERR(mrst->phy);
-	reset_control_deassert(mrst->phy);
+	if (!mp->param->has_shared_phy) {
+		mrst->phy = meson_pcie_get_reset(mp, "phy", PCIE_SHARED_RESET);
+		if (IS_ERR(mrst->phy))
+			return PTR_ERR(mrst->phy);
+		reset_control_deassert(mrst->phy);
+	}
 
 	mrst->port = meson_pcie_get_reset(mp, "port", PCIE_NORMAL_RESET);
 	if (IS_ERR(mrst->port))
@@ -180,27 +189,52 @@ static int meson_pcie_get_mems(struct platform_device *pdev,
 	if (IS_ERR(mp->mem_res.cfg_base))
 		return PTR_ERR(mp->mem_res.cfg_base);
 
-	/* Meson SoC has two PCI controllers use same phy register*/
-	mp->mem_res.phy_base = meson_pcie_get_mem_shared(pdev, mp, "phy");
-	if (IS_ERR(mp->mem_res.phy_base))
-		return PTR_ERR(mp->mem_res.phy_base);
+	/* Meson AXG SoC has two PCI controllers use same phy register */
+	if (!mp->param->has_shared_phy) {
+		mp->mem_res.phy_base =
+			meson_pcie_get_mem_shared(pdev, mp, "phy");
+		if (IS_ERR(mp->mem_res.phy_base))
+			return PTR_ERR(mp->mem_res.phy_base);
+	}
 
 	return 0;
 }
 
-static void meson_pcie_power_on(struct meson_pcie *mp)
+static int meson_pcie_power_on(struct meson_pcie *mp)
 {
-	writel(MESON_PCIE_PHY_POWERUP, mp->mem_res.phy_base);
+	int ret = 0;
+
+	if (mp->param->has_shared_phy) {
+		ret = phy_init(mp->phy);
+		if (ret)
+			return ret;
+
+		ret = phy_power_on(mp->phy);
+		if (ret) {
+			phy_exit(mp->phy);
+			return ret;
+		}
+	} else
+		writel(MESON_PCIE_PHY_POWERUP, mp->mem_res.phy_base);
+
+	return 0;
 }
 
-static void meson_pcie_reset(struct meson_pcie *mp)
+static int meson_pcie_reset(struct meson_pcie *mp)
 {
 	struct meson_pcie_rc_reset *mrst = &mp->mrst;
-
-	reset_control_assert(mrst->phy);
-	udelay(PCIE_RESET_DELAY);
-	reset_control_deassert(mrst->phy);
-	udelay(PCIE_RESET_DELAY);
+	int ret = 0;
+
+	if (mp->param->has_shared_phy) {
+		ret = phy_reset(mp->phy);
+		if (ret)
+			return ret;
+	} else {
+		reset_control_assert(mrst->phy);
+		udelay(PCIE_RESET_DELAY);
+		reset_control_deassert(mrst->phy);
+		udelay(PCIE_RESET_DELAY);
+	}
 
 	reset_control_assert(mrst->port);
 	reset_control_assert(mrst->apb);
@@ -208,6 +242,8 @@ static void meson_pcie_reset(struct meson_pcie *mp)
 	reset_control_deassert(mrst->port);
 	reset_control_deassert(mrst->apb);
 	udelay(PCIE_RESET_DELAY);
+
+	return 0;
 }
 
 static inline struct clk *meson_pcie_probe_clock(struct device *dev,
@@ -250,9 +286,11 @@ static int meson_pcie_probe_clocks(struct meson_pcie *mp)
 	if (IS_ERR(res->port_clk))
 		return PTR_ERR(res->port_clk);
 
-	res->mipi_gate = meson_pcie_probe_clock(dev, "mipi", 0);
-	if (IS_ERR(res->mipi_gate))
-		return PTR_ERR(res->mipi_gate);
+	if (!mp->param->has_shared_phy) {
+		res->mipi_gate = meson_pcie_probe_clock(dev, "mipi", 0);
+		if (IS_ERR(res->mipi_gate))
+			return PTR_ERR(res->mipi_gate);
+	}
 
 	res->general_clk = meson_pcie_probe_clock(dev, "general", 0);
 	if (IS_ERR(res->general_clk))
@@ -524,6 +562,7 @@ static const struct dw_pcie_ops dw_pcie_ops = {
 
 static int meson_pcie_probe(struct platform_device *pdev)
 {
+	const struct meson_pcie_param *match_data;
 	struct device *dev = &pdev->dev;
 	struct dw_pcie *pci;
 	struct meson_pcie *mp;
@@ -537,6 +576,19 @@ static int meson_pcie_probe(struct platform_device *pdev)
 	pci->dev = dev;
 	pci->ops = &dw_pcie_ops;
 
+	match_data = of_device_get_match_data(dev);
+	if (!match_data) {
+		dev_err(dev, "failed to get match data\n");
+		return -ENODEV;
+	}
+	mp->param = match_data;
+
+	if (mp->param->has_shared_phy) {
+		mp->phy = devm_phy_get(dev, "pcie");
+		if (IS_ERR(mp->phy))
+			return PTR_ERR(mp->phy);
+	}
+
 	mp->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
 	if (IS_ERR(mp->reset_gpio)) {
 		dev_err(dev, "get reset gpio failed\n");
@@ -555,13 +607,22 @@ static int meson_pcie_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	meson_pcie_power_on(mp);
-	meson_pcie_reset(mp);
+	ret = meson_pcie_power_on(mp);
+	if (ret) {
+		dev_err(dev, "phy power on failed, %d\n", ret);
+		return ret;
+	}
+
+	ret = meson_pcie_reset(mp);
+	if (ret) {
+		dev_err(dev, "reset failed, %d\n", ret);
+		goto err_phy;
+	}
 
 	ret = meson_pcie_probe_clocks(mp);
 	if (ret) {
 		dev_err(dev, "init clock resources failed, %d\n", ret);
-		return ret;
+		goto err_phy;
 	}
 
 	platform_set_drvdata(pdev, mp);
@@ -569,15 +630,36 @@ static int meson_pcie_probe(struct platform_device *pdev)
 	ret = meson_add_pcie_port(mp, pdev);
 	if (ret < 0) {
 		dev_err(dev, "Add PCIe port failed, %d\n", ret);
-		return ret;
+		goto err_phy;
 	}
 
 	return 0;
+
+err_phy:
+	if (mp->param->has_shared_phy) {
+		phy_power_off(mp->phy);
+		phy_exit(mp->phy);
+	}
+
+	return ret;
 }
 
+static struct meson_pcie_param meson_pcie_axg_param = {
+	.has_shared_phy = false,
+};
+
+static struct meson_pcie_param meson_pcie_g12a_param = {
+	.has_shared_phy = true,
+};
+
 static const struct of_device_id meson_pcie_of_match[] = {
 	{
 		.compatible = "amlogic,axg-pcie",
+		.data = &meson_pcie_axg_param,
+	},
+	{
+		.compatible = "amlogic,g12a-pcie",
+		.data = &meson_pcie_g12a_param,
 	},
 	{},
 };
-- 
2.22.0


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

  parent reply	other threads:[~2019-09-16 12:52 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-09-16 12:50 [PATCH v2 0/6] arm64: dts: meson-g12: add support for PCIe Neil Armstrong
2019-09-16 12:50 ` [PATCH v2 1/6] dt-bindings: pci: amlogic, meson-pcie: Add G12A bindings Neil Armstrong
2019-09-16 13:46   ` [PATCH v2 1/6] dt-bindings: pci: amlogic,meson-pcie: " Andrew Murray
2019-09-16 12:50 ` [PATCH v2 2/6] PCI: amlogic: Fix probed clock names Neil Armstrong
2019-09-16 12:50 ` Neil Armstrong [this message]
2019-09-16 13:20   ` [PATCH v2 3/6] PCI: amlogic: meson: Add support for G12A Andrew Murray
2019-09-16 12:50 ` [PATCH v2 4/6] phy: meson-g12a-usb3-pcie: Add support for PCIe mode Neil Armstrong
2019-09-16 13:23   ` Andrew Murray
2019-09-16 12:50 ` [PATCH v2 5/6] arm64: dts: meson-g12a: Add PCIe node Neil Armstrong
2019-09-16 13:42   ` Andrew Murray
2019-09-16 12:50 ` [PATCH v2 6/6] arm64: dts: khadas-vim3: add commented support for PCIe Neil Armstrong
2019-09-16 13:45   ` Andrew Murray
2019-09-24 18:59 ` [PATCH v2 0/6] arm64: dts: meson-g12: add " Kevin Hilman
2019-10-15 13:14 ` Lorenzo Pieralisi
2019-10-15 13:38   ` Neil Armstrong

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190916125022.10754-4-narmstrong@baylibre.com \
    --to=narmstrong@baylibre.com \
    --cc=andrew.murray@arm.com \
    --cc=bhelgaas@google.com \
    --cc=gouwa@khadas.com \
    --cc=khilman@baylibre.com \
    --cc=kishon@ti.com \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=maz@kernel.org \
    --cc=nick@khadas.com \
    --cc=repk@triplefau.lt \
    --cc=yue.wang@Amlogic.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).