From: Guillaume La Roque <glaroque@baylibre.com>
To: amit.kucheria@linaro.org, rui.zhang@intel.com,
edubezval@gmail.com, daniel.lezcano@linaro.org
Cc: devicetree@vger.kernel.org, linux-amlogic@lists.infradead.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, linux-pm@vger.kernel.org
Subject: [PATCH v5 6/7] arm64: dts: amlogic: g12b: add cooling properties
Date: Fri, 27 Sep 2019 14:47:48 +0200 [thread overview]
Message-ID: <20190927124750.12467-8-glaroque@baylibre.com> (raw)
In-Reply-To: <20190927124750.12467-1-glaroque@baylibre.com>
Add missing #colling-cells field for G12B SoC
Add cooling-map for passive and hot trip point
Tested-by: Christian Hewitt <christianshewitt@gmail.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Guillaume La Roque <glaroque@baylibre.com>
---
arch/arm64/boot/dts/amlogic/meson-g12b.dtsi | 29 +++++++++++++++++++++
1 file changed, 29 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b.dtsi
index 98ae8a7c8b41..4bb89bce758f 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b.dtsi
@@ -49,6 +49,7 @@
reg = <0x0 0x0>;
enable-method = "psci";
next-level-cache = <&l2>;
+ #cooling-cells = <2>;
};
cpu1: cpu@1 {
@@ -57,6 +58,7 @@
reg = <0x0 0x1>;
enable-method = "psci";
next-level-cache = <&l2>;
+ #cooling-cells = <2>;
};
cpu100: cpu@100 {
@@ -65,6 +67,7 @@
reg = <0x0 0x100>;
enable-method = "psci";
next-level-cache = <&l2>;
+ #cooling-cells = <2>;
};
cpu101: cpu@101 {
@@ -73,6 +76,7 @@
reg = <0x0 0x101>;
enable-method = "psci";
next-level-cache = <&l2>;
+ #cooling-cells = <2>;
};
cpu102: cpu@102 {
@@ -81,6 +85,7 @@
reg = <0x0 0x102>;
enable-method = "psci";
next-level-cache = <&l2>;
+ #cooling-cells = <2>;
};
cpu103: cpu@103 {
@@ -89,6 +94,7 @@
reg = <0x0 0x103>;
enable-method = "psci";
next-level-cache = <&l2>;
+ #cooling-cells = <2>;
};
l2: l2-cache0 {
@@ -219,3 +225,26 @@
&sd_emmc_a {
amlogic,dram-access-quirk;
};
+
+&cpu_thermal {
+ cooling-maps {
+ map0 {
+ trip = <&cpu_passive>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu100 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu101 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu102 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu103 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ map1 {
+ trip = <&cpu_hot>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu100 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu101 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu102 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu103 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+};
--
2.17.1
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
next prev parent reply other threads:[~2019-09-27 12:50 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-27 12:47 [PATCH v5 0/7] Add support of New Amlogic temperature sensor for G12 SoCs Guillaume La Roque
2019-09-27 12:47 ` [PATCH v5 1/7] dt-bindings: thermal: Add DT bindings documentation for Amlogic Thermal Guillaume La Roque
2019-09-27 12:47 ` [PATCH v5 2/7] thermal: amlogic: Add thermal driver to support G12 SoCs Guillaume La Roque
2019-09-27 12:47 ` [PATCH v5 3/7] arm64: dts: amlogic: g12: add temperature sensor Guillaume La Roque
2019-09-27 12:47 ` [PATCH v5 4/7] arm64: dts: meson: g12: Add minimal thermal zone Guillaume La Roque
2019-09-27 12:47 ` [PATCH v5 5/7] arm64: dts: amlogic: g12a: add cooling properties Guillaume La Roque
2019-09-27 12:47 ` [PATCH v5 5/7] arm64: dts: amlogic: g12a: add missing cooling info Guillaume La Roque
2019-09-27 12:47 ` Guillaume La Roque [this message]
2019-09-27 12:47 ` [PATCH v5 6/7] arm64: dts: amlogic: g12b: " Guillaume La Roque
2019-09-27 12:47 ` [PATCH v5 7/7] MAINTAINERS: add entry for Amlogic Thermal driver Guillaume La Roque
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190927124750.12467-8-glaroque@baylibre.com \
--to=glaroque@baylibre.com \
--cc=amit.kucheria@linaro.org \
--cc=daniel.lezcano@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=edubezval@gmail.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=rui.zhang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).