linux-amlogic.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v2 1/3] dt-bindings: watchdog: Convert Samsung SoC watchdog bindings to json-schema
@ 2019-09-20 16:21 Krzysztof Kozlowski
  2019-09-20 16:21 ` [PATCH v2 2/3] dt-bindings: watchdog: Add missing clocks requirement in Samsung SoC watchdog Krzysztof Kozlowski
                   ` (3 more replies)
  0 siblings, 4 replies; 8+ messages in thread
From: Krzysztof Kozlowski @ 2019-09-20 16:21 UTC (permalink / raw)
  To: Wim Van Sebroeck, Guenter Roeck, Rob Herring, Mark Rutland,
	Kevin Hilman, linux-watchdog, devicetree, linux-arm-kernel,
	linux-amlogic, linux-kernel
  Cc: Krzysztof Kozlowski

Convert Samsung S3C/S5P/Exynos watchdog bindings to DT schema format
using json-schema.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

---

Changes since v1:
1. Indent example with four spaces (more readable),
2. Remove unneeded timeout-sec description and include generic bindings.
---
 .../bindings/watchdog/samsung-wdt.txt         | 35 ----------
 .../bindings/watchdog/samsung-wdt.yaml        | 65 +++++++++++++++++++
 2 files changed, 65 insertions(+), 35 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/watchdog/samsung-wdt.txt
 create mode 100644 Documentation/devicetree/bindings/watchdog/samsung-wdt.yaml

diff --git a/Documentation/devicetree/bindings/watchdog/samsung-wdt.txt b/Documentation/devicetree/bindings/watchdog/samsung-wdt.txt
deleted file mode 100644
index 46dcb48e75b4..000000000000
--- a/Documentation/devicetree/bindings/watchdog/samsung-wdt.txt
+++ /dev/null
@@ -1,35 +0,0 @@
-* Samsung's Watchdog Timer Controller
-
-The Samsung's Watchdog controller is used for resuming system operation
-after a preset amount of time during which the WDT reset event has not
-occurred.
-
-Required properties:
-- compatible : should be one among the following
-	- "samsung,s3c2410-wdt" for S3C2410
-	- "samsung,s3c6410-wdt" for S3C6410, S5PV210 and Exynos4
-	- "samsung,exynos5250-wdt" for Exynos5250
-	- "samsung,exynos5420-wdt" for Exynos5420
-	- "samsung,exynos7-wdt" for Exynos7
-
-- reg : base physical address of the controller and length of memory mapped
-	region.
-- interrupts : interrupt number to the cpu.
-- samsung,syscon-phandle : reference to syscon node (This property required only
-	in case of compatible being "samsung,exynos5250-wdt" or "samsung,exynos5420-wdt".
-	In case of Exynos5250 and 5420 this property points to syscon node holding the PMU
-	base address)
-
-Optional properties:
-- timeout-sec : contains the watchdog timeout in seconds.
-
-Example:
-
-watchdog@101d0000 {
-	compatible = "samsung,exynos5250-wdt";
-	reg = <0x101D0000 0x100>;
-	interrupts = <0 42 0>;
-	clocks = <&clock 336>;
-	clock-names = "watchdog";
-	samsung,syscon-phandle = <&pmu_syscon>;
-};
diff --git a/Documentation/devicetree/bindings/watchdog/samsung-wdt.yaml b/Documentation/devicetree/bindings/watchdog/samsung-wdt.yaml
new file mode 100644
index 000000000000..5a3a3cec8e20
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/samsung-wdt.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/samsung-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung SoC Watchdog Timer Controller
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |+
+  The Samsung's Watchdog controller is used for resuming system operation
+  after a preset amount of time during which the WDT reset event has not
+  occurred.
+
+properties:
+  compatible:
+    enum:
+      - samsung,s3c2410-wdt                   # for S3C2410
+      - samsung,s3c6410-wdt                   # for S3C6410, S5PV210 and Exynos4
+      - samsung,exynos5250-wdt                # for Exynos5250
+      - samsung,exynos5420-wdt                # for Exynos5420
+      - samsung,exynos7-wdt                   # for Exynos7
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  samsung,syscon-phandle:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the PMU system controller node (in case of Exynos5250
+      and Exynos5420).
+
+required:
+  - compatible
+  - interrupts
+  - reg
+
+allOf:
+  - $ref: watchdog.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,exynos5250-wdt
+              - samsung,exynos5420-wdt
+    then:
+      required:
+        - samsung,syscon-phandle
+
+examples:
+  - |
+    watchdog@101d0000 {
+        compatible = "samsung,exynos5250-wdt";
+        reg = <0x101D0000 0x100>;
+        interrupts = <0 42 0>;
+        clocks = <&clock 336>;
+        clock-names = "watchdog";
+        samsung,syscon-phandle = <&pmu_syscon>;
+    };
-- 
2.17.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

^ permalink raw reply related	[flat|nested] 8+ messages in thread

end of thread, other threads:[~2019-10-02 14:30 UTC | newest]

Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-09-20 16:21 [PATCH v2 1/3] dt-bindings: watchdog: Convert Samsung SoC watchdog bindings to json-schema Krzysztof Kozlowski
2019-09-20 16:21 ` [PATCH v2 2/3] dt-bindings: watchdog: Add missing clocks requirement in Samsung SoC watchdog Krzysztof Kozlowski
2019-09-20 16:21 ` [PATCH v2 3/3] dt-bindings: watchdog: meson-gxbb-wdt: Include generic watchdog bindings Krzysztof Kozlowski
2019-10-01 22:21   ` Rob Herring
2019-09-20 16:23 ` [PATCH v2 1/3] dt-bindings: watchdog: Convert Samsung SoC watchdog bindings to json-schema Krzysztof Kozlowski
2019-10-01 22:21 ` Rob Herring
2019-10-02  7:48   ` Krzysztof Kozlowski
2019-10-02 14:29     ` Rob Herring

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).