From: Rob Herring <robh@kernel.org>
To: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: mark.rutland@arm.com, devicetree@vger.kernel.org,
narmstrong@baylibre.com, khilman@baylibre.com,
linux-kernel@vger.kernel.org, linux-amlogic@lists.infradead.org,
linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
jbrunet@baylibre.com
Subject: Re: [PATCH 1/6] dt-bindings: clock: add the Amlogic Meson8 DDR clock controller binding
Date: Wed, 02 Oct 2019 09:19:11 -0500 [thread overview]
Message-ID: <20191001235650.GA11980@bogus> (raw)
In-Reply-To: <20190921151835.770263-2-martin.blumenstingl@googlemail.com>
On Sat, Sep 21, 2019 at 05:18:30PM +0200, Martin Blumenstingl wrote:
> Amlogic Meson8, Meson8b and Meson8m2 SoCs have a DDR clock controller in
> the MMCBUS registers. There is no public documentation on this, but the
> GPL u-boot sources from the Amlogic BSP show that:
> - it uses the same XTAL input as the main clock controller
> - it contains a PLL which seems to be implemented just like the other
> PLLs in this SoC
> - there is a power-of-two PLL post-divider
>
> Add the documentation and header file for this DDR clock controller.
>
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> ---
> .../clock/amlogic,meson8-ddr-clkc.yaml | 50 +++++++++++++++++++
> include/dt-bindings/clock/meson8-ddr-clkc.h | 4 ++
> 2 files changed, 54 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/clock/amlogic,meson8-ddr-clkc.yaml
> create mode 100644 include/dt-bindings/clock/meson8-ddr-clkc.h
>
> diff --git a/Documentation/devicetree/bindings/clock/amlogic,meson8-ddr-clkc.yaml b/Documentation/devicetree/bindings/clock/amlogic,meson8-ddr-clkc.yaml
> new file mode 100644
> index 000000000000..bf3ca5888485
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/amlogic,meson8-ddr-clkc.yaml
> @@ -0,0 +1,50 @@
> +# SPDX-License-Identifier: GPL-2.0
(GPL-2.0-only OR BSD-2-Clause) for new bindings please.
With that,
Reviewed-by: Rob Herring <robh@kernel.org>
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/clock/amlogic,meson8-ddr-clkc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Amlogic DDR Clock Controller Device Tree Bindings
> +
> +maintainers:
> + - Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> +
> +properties:
> + compatible:
> + enum:
> + - amlogic,meson8-ddr-clkc
> + - amlogic,meson8b-ddr-clkc
> +
> + reg:
> + maxItems: 1
> +
> + clocks:
> + maxItems: 1
> +
> + clock-names:
> + items:
> + - const: xtal
> +
> + "#clock-cells":
> + const: 1
> +
> +required:
> + - compatible
> + - reg
> + - clocks
> + - clock-names
> + - "#clock-cells"
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + ddr_clkc: clock-controller@400 {
> + compatible = "amlogic,meson8-ddr-clkc";
> + reg = <0x400 0x20>;
> + clocks = <&xtal>;
> + clock-names = "xtal";
> + #clock-cells = <1>;
> + };
> +
> +...
> diff --git a/include/dt-bindings/clock/meson8-ddr-clkc.h b/include/dt-bindings/clock/meson8-ddr-clkc.h
> new file mode 100644
> index 000000000000..a8e0fa2987ab
> --- /dev/null
> +++ b/include/dt-bindings/clock/meson8-ddr-clkc.h
> @@ -0,0 +1,4 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +
> +#define DDR_CLKID_DDR_PLL_DCO 0
> +#define DDR_CLKID_DDR_PLL 1
> --
> 2.23.0
>
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
next prev parent reply other threads:[~2019-10-02 14:19 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-21 15:18 [PATCH 0/6] add the DDR clock controller on Meson8 and Meson8b Martin Blumenstingl
2019-09-21 15:18 ` [PATCH 1/6] dt-bindings: clock: add the Amlogic Meson8 DDR clock controller binding Martin Blumenstingl
2019-10-02 14:19 ` Rob Herring [this message]
2019-09-21 15:18 ` [PATCH 2/6] clk: meson: add a driver for the Meson8/8b/8m2 DDR clock controller Martin Blumenstingl
2019-10-01 13:29 ` Jerome Brunet
2019-10-01 18:53 ` Martin Blumenstingl
2019-10-02 9:04 ` Jerome Brunet
2019-09-21 15:18 ` [PATCH 3/6] clk: meson: meson8b: use of_clk_hw_register to register the clocks Martin Blumenstingl
2019-09-21 15:18 ` [PATCH 4/6] clk: meson: meson8b: add the ddr_pll input for the audio clocks Martin Blumenstingl
2019-09-21 15:18 ` [PATCH 5/6] ARM: dts: meson8: add the DDR clock controller Martin Blumenstingl
2019-09-21 15:18 ` [PATCH 6/6] ARM: dts: meson8b: " Martin Blumenstingl
2019-09-23 10:06 ` [PATCH 0/6] add the DDR clock controller on Meson8 and Meson8b Jerome Brunet
2019-09-23 20:49 ` Martin Blumenstingl
2019-10-01 13:33 ` Jerome Brunet
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191001235650.GA11980@bogus \
--to=robh@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jbrunet@baylibre.com \
--cc=khilman@baylibre.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=martin.blumenstingl@googlemail.com \
--cc=narmstrong@baylibre.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).