* [PATCH AUTOSEL 4.19 036/205] ASoC: meson: axg-fifo: report interrupt request failure
[not found] <20191108113752.12502-1-sashal@kernel.org>
@ 2019-11-08 11:35 ` Sasha Levin
2019-11-08 11:35 ` [PATCH AUTOSEL 4.19 078/205] ARM: dts: meson8: fix the clock controller register size Sasha Levin
` (4 subsequent siblings)
5 siblings, 0 replies; 6+ messages in thread
From: Sasha Levin @ 2019-11-08 11:35 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Sasha Levin, linux-amlogic, Mark Brown, Jerome Brunet
From: Jerome Brunet <jbrunet@baylibre.com>
[ Upstream commit dadfab7272b13ca441efdb9aa9117bc669680b05 ]
Return value of request_irq() was irgnored. Fix this and report
the failure if any
Fixes: 6dc4fa179fb8 ("ASoC: meson: add axg fifo base driver")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
sound/soc/meson/axg-fifo.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/sound/soc/meson/axg-fifo.c b/sound/soc/meson/axg-fifo.c
index 30262550e37b1..0e4f65e654c4b 100644
--- a/sound/soc/meson/axg-fifo.c
+++ b/sound/soc/meson/axg-fifo.c
@@ -203,6 +203,8 @@ static int axg_fifo_pcm_open(struct snd_pcm_substream *ss)
ret = request_irq(fifo->irq, axg_fifo_pcm_irq_block, 0,
dev_name(dev), ss);
+ if (ret)
+ return ret;
/* Enable pclk to access registers and clock the fifo ip */
ret = clk_prepare_enable(fifo->pclk);
--
2.20.1
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 6+ messages in thread* [PATCH AUTOSEL 4.19 078/205] ARM: dts: meson8: fix the clock controller register size
[not found] <20191108113752.12502-1-sashal@kernel.org>
2019-11-08 11:35 ` [PATCH AUTOSEL 4.19 036/205] ASoC: meson: axg-fifo: report interrupt request failure Sasha Levin
@ 2019-11-08 11:35 ` Sasha Levin
2019-11-08 11:35 ` [PATCH AUTOSEL 4.19 079/205] ARM: dts: meson8b: " Sasha Levin
` (3 subsequent siblings)
5 siblings, 0 replies; 6+ messages in thread
From: Sasha Levin @ 2019-11-08 11:35 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Sasha Levin, devicetree, Neil Armstrong, Martin Blumenstingl,
Kevin Hilman, linux-amlogic
From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
[ Upstream commit f7f9da89bc4f61e33f7b9f5c75c4efdc1f0455d8 ]
The clock controller registers are not 0x460 wide because the reset
controller starts at CBUS 0x4404. This currently overlaps with the
clock controller (which is at CBUS 0x4000).
There is no public documentation available on the actual size of the
clock controller's register area (also called "HHI"). However, in
Amlogic's GPL kernel sources the last "HHI" register is
HHI_HDMI_PHY_CNTL2 at CBUS + 0x43a8. 0x400 was chosen because that size
doesn't seem unlikely.
Fixes: 2c323c43a3d619 ("ARM: dts: meson8: add and use the real clock controller")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/meson8.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi
index d77dcf890cfc8..7162e0ca05b0a 100644
--- a/arch/arm/boot/dts/meson8.dtsi
+++ b/arch/arm/boot/dts/meson8.dtsi
@@ -194,7 +194,7 @@
#clock-cells = <1>;
#reset-cells = <1>;
compatible = "amlogic,meson8-clkc";
- reg = <0x8000 0x4>, <0x4000 0x460>;
+ reg = <0x8000 0x4>, <0x4000 0x400>;
};
reset: reset-controller@4404 {
--
2.20.1
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 6+ messages in thread* [PATCH AUTOSEL 4.19 079/205] ARM: dts: meson8b: fix the clock controller register size
[not found] <20191108113752.12502-1-sashal@kernel.org>
2019-11-08 11:35 ` [PATCH AUTOSEL 4.19 036/205] ASoC: meson: axg-fifo: report interrupt request failure Sasha Levin
2019-11-08 11:35 ` [PATCH AUTOSEL 4.19 078/205] ARM: dts: meson8: fix the clock controller register size Sasha Levin
@ 2019-11-08 11:35 ` Sasha Levin
2019-11-08 11:37 ` [PATCH AUTOSEL 4.19 163/205] arm64: dts: meson: libretech: update board model Sasha Levin
` (2 subsequent siblings)
5 siblings, 0 replies; 6+ messages in thread
From: Sasha Levin @ 2019-11-08 11:35 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Sasha Levin, devicetree, Neil Armstrong, Martin Blumenstingl,
Kevin Hilman, linux-amlogic
From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
[ Upstream commit f31094fe8c16fbd2ca47921acf93b744b045aace ]
The clock controller registers are not 0x460 wide because the reset
controller starts at CBUS 0x4404. This currently overlaps with the
clock controller (which is at CBUS 0x4000).
There is no public documentation available on the actual size of the
clock controller's register area (also called "HHI"). However, in
Amlogic's GPL kernel sources the last "HHI" register is
HHI_HDMI_PHY_CNTL2 at CBUS + 0x43a8. 0x400 was chosen because that size
doesn't seem unlikely.
Fixes: 4a69fcd3a10803 ("ARM: meson: Add DTS for Odroid-C1 and Tronfy MXQ boards")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/meson8b.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi
index 5b3e5c50c72f7..4293047a4b76b 100644
--- a/arch/arm/boot/dts/meson8b.dtsi
+++ b/arch/arm/boot/dts/meson8b.dtsi
@@ -163,7 +163,7 @@
#clock-cells = <1>;
#reset-cells = <1>;
compatible = "amlogic,meson8b-clkc";
- reg = <0x8000 0x4>, <0x4000 0x460>;
+ reg = <0x8000 0x4>, <0x4000 0x400>;
};
reset: reset-controller@4404 {
--
2.20.1
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 6+ messages in thread* [PATCH AUTOSEL 4.19 163/205] arm64: dts: meson: libretech: update board model
[not found] <20191108113752.12502-1-sashal@kernel.org>
` (2 preceding siblings ...)
2019-11-08 11:35 ` [PATCH AUTOSEL 4.19 079/205] ARM: dts: meson8b: " Sasha Levin
@ 2019-11-08 11:37 ` Sasha Levin
2019-11-08 11:37 ` [PATCH AUTOSEL 4.19 164/205] arm64: dts: meson-axg: use the proper compatible for ethmac Sasha Levin
2019-11-08 11:37 ` [PATCH AUTOSEL 4.19 192/205] arm64: dts: meson: Fix erroneous SPI bus warnings Sasha Levin
5 siblings, 0 replies; 6+ messages in thread
From: Sasha Levin @ 2019-11-08 11:37 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Sasha Levin, devicetree, Kevin Hilman, linux-amlogic, Da Xue,
Jerome Brunet
From: Jerome Brunet <jbrunet@baylibre.com>
[ Upstream commit b7eb0e26cc4a212fde09144cd49d4103170d2b9e ]
There is actually several different libretech board with the CC suffix
so the model name is not appropriate here. Update to something more
specific
Reported-by: Da Xue <da@lessconfused.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
index f63bceb88caaf..90a56af967a7f 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
@@ -13,7 +13,7 @@
/ {
compatible = "libretech,cc", "amlogic,s905x", "amlogic,meson-gxl";
- model = "Libre Technology CC";
+ model = "Libre Computer Board AML-S905X-CC";
aliases {
serial0 = &uart_AO;
--
2.20.1
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 6+ messages in thread* [PATCH AUTOSEL 4.19 164/205] arm64: dts: meson-axg: use the proper compatible for ethmac
[not found] <20191108113752.12502-1-sashal@kernel.org>
` (3 preceding siblings ...)
2019-11-08 11:37 ` [PATCH AUTOSEL 4.19 163/205] arm64: dts: meson: libretech: update board model Sasha Levin
@ 2019-11-08 11:37 ` Sasha Levin
2019-11-08 11:37 ` [PATCH AUTOSEL 4.19 192/205] arm64: dts: meson: Fix erroneous SPI bus warnings Sasha Levin
5 siblings, 0 replies; 6+ messages in thread
From: Sasha Levin @ 2019-11-08 11:37 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Sasha Levin, devicetree, Neil Armstrong, Martin Blumenstingl,
Kevin Hilman, linux-amlogic
From: Neil Armstrong <narmstrong@baylibre.com>
[ Upstream commit eaf8f57c0bf5451132932616ab62f9481adefb55 ]
Use the correct compatible for the AXG ethernet mac node.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
index c518130e5ce73..3c34f14fa5086 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
@@ -458,7 +458,7 @@
};
ethmac: ethernet@ff3f0000 {
- compatible = "amlogic,meson-gxbb-dwmac", "snps,dwmac";
+ compatible = "amlogic,meson-axg-dwmac", "snps,dwmac";
reg = <0x0 0xff3f0000 0x0 0x10000
0x0 0xff634540 0x0 0x8>;
interrupts = <GIC_SPI 8 IRQ_TYPE_EDGE_RISING>;
--
2.20.1
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 6+ messages in thread* [PATCH AUTOSEL 4.19 192/205] arm64: dts: meson: Fix erroneous SPI bus warnings
[not found] <20191108113752.12502-1-sashal@kernel.org>
` (4 preceding siblings ...)
2019-11-08 11:37 ` [PATCH AUTOSEL 4.19 164/205] arm64: dts: meson-axg: use the proper compatible for ethmac Sasha Levin
@ 2019-11-08 11:37 ` Sasha Levin
5 siblings, 0 replies; 6+ messages in thread
From: Sasha Levin @ 2019-11-08 11:37 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Sasha Levin, Rob Herring, devicetree, Kevin Hilman, Carlo Caione,
linux-amlogic
From: Rob Herring <robh@kernel.org>
[ Upstream commit 68ecb5c1920c5b98b1e717fd2349fba2ee5d4031 ]
dtc has new checks for SPI buses. The meson dts files have a node named
spi' which causes false positive warnings. As the node is a pinctrl child
node, change the node name to be 'spi-pins' to fix the warnings.
arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dtb: Warning (spi_bus_bridge): /soc/periphs@c8834000/pinctrl@4b0/spi: incorrect #address-cells for SPI bus
Cc: Carlo Caione <carlo@caione.org>
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: linux-amlogic@lists.infradead.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 2 +-
arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
index 98cbba6809caa..1ade7e486828c 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
@@ -390,7 +390,7 @@
};
};
- spi_pins: spi {
+ spi_pins: spi-pins {
mux {
groups = "spi_miso",
"spi_mosi",
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
index c87a80e9bcc6a..8f0bb3c44bd6d 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
@@ -337,7 +337,7 @@
};
};
- spi_pins: spi {
+ spi_pins: spi-pins {
mux {
groups = "spi_miso",
"spi_mosi",
--
2.20.1
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 6+ messages in thread