* [PATCH AUTOSEL 4.14 037/103] ARM: dts: meson8: fix the clock controller register size
[not found] <20191108114310.14363-1-sashal@kernel.org>
@ 2019-11-08 11:42 ` Sasha Levin
2019-11-08 11:42 ` [PATCH AUTOSEL 4.14 038/103] ARM: dts: meson8b: " Sasha Levin
` (2 subsequent siblings)
3 siblings, 0 replies; 4+ messages in thread
From: Sasha Levin @ 2019-11-08 11:42 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Sasha Levin, devicetree, Neil Armstrong, Martin Blumenstingl,
Kevin Hilman, linux-amlogic
From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
[ Upstream commit f7f9da89bc4f61e33f7b9f5c75c4efdc1f0455d8 ]
The clock controller registers are not 0x460 wide because the reset
controller starts at CBUS 0x4404. This currently overlaps with the
clock controller (which is at CBUS 0x4000).
There is no public documentation available on the actual size of the
clock controller's register area (also called "HHI"). However, in
Amlogic's GPL kernel sources the last "HHI" register is
HHI_HDMI_PHY_CNTL2 at CBUS + 0x43a8. 0x400 was chosen because that size
doesn't seem unlikely.
Fixes: 2c323c43a3d619 ("ARM: dts: meson8: add and use the real clock controller")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/meson8.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi
index b98d44fde6b60..e3ae85d65b39b 100644
--- a/arch/arm/boot/dts/meson8.dtsi
+++ b/arch/arm/boot/dts/meson8.dtsi
@@ -170,7 +170,7 @@
#clock-cells = <1>;
#reset-cells = <1>;
compatible = "amlogic,meson8-clkc";
- reg = <0x8000 0x4>, <0x4000 0x460>;
+ reg = <0x8000 0x4>, <0x4000 0x400>;
};
pwm_ef: pwm@86c0 {
--
2.20.1
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 4+ messages in thread* [PATCH AUTOSEL 4.14 038/103] ARM: dts: meson8b: fix the clock controller register size
[not found] <20191108114310.14363-1-sashal@kernel.org>
2019-11-08 11:42 ` [PATCH AUTOSEL 4.14 037/103] ARM: dts: meson8: fix the clock controller register size Sasha Levin
@ 2019-11-08 11:42 ` Sasha Levin
2019-11-08 11:42 ` [PATCH AUTOSEL 4.14 082/103] arm64: dts: meson: libretech: update board model Sasha Levin
2019-11-08 11:42 ` [PATCH AUTOSEL 4.14 094/103] arm64: dts: meson: Fix erroneous SPI bus warnings Sasha Levin
3 siblings, 0 replies; 4+ messages in thread
From: Sasha Levin @ 2019-11-08 11:42 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Sasha Levin, devicetree, Neil Armstrong, Martin Blumenstingl,
Kevin Hilman, linux-amlogic
From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
[ Upstream commit f31094fe8c16fbd2ca47921acf93b744b045aace ]
The clock controller registers are not 0x460 wide because the reset
controller starts at CBUS 0x4404. This currently overlaps with the
clock controller (which is at CBUS 0x4000).
There is no public documentation available on the actual size of the
clock controller's register area (also called "HHI"). However, in
Amlogic's GPL kernel sources the last "HHI" register is
HHI_HDMI_PHY_CNTL2 at CBUS + 0x43a8. 0x400 was chosen because that size
doesn't seem unlikely.
Fixes: 4a69fcd3a10803 ("ARM: meson: Add DTS for Odroid-C1 and Tronfy MXQ boards")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/meson8b.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi
index bc278da7df0d9..0f76da280ee76 100644
--- a/arch/arm/boot/dts/meson8b.dtsi
+++ b/arch/arm/boot/dts/meson8b.dtsi
@@ -121,7 +121,7 @@
#clock-cells = <1>;
#reset-cells = <1>;
compatible = "amlogic,meson8b-clkc";
- reg = <0x8000 0x4>, <0x4000 0x460>;
+ reg = <0x8000 0x4>, <0x4000 0x400>;
};
reset: reset-controller@4404 {
--
2.20.1
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 4+ messages in thread* [PATCH AUTOSEL 4.14 082/103] arm64: dts: meson: libretech: update board model
[not found] <20191108114310.14363-1-sashal@kernel.org>
2019-11-08 11:42 ` [PATCH AUTOSEL 4.14 037/103] ARM: dts: meson8: fix the clock controller register size Sasha Levin
2019-11-08 11:42 ` [PATCH AUTOSEL 4.14 038/103] ARM: dts: meson8b: " Sasha Levin
@ 2019-11-08 11:42 ` Sasha Levin
2019-11-08 11:42 ` [PATCH AUTOSEL 4.14 094/103] arm64: dts: meson: Fix erroneous SPI bus warnings Sasha Levin
3 siblings, 0 replies; 4+ messages in thread
From: Sasha Levin @ 2019-11-08 11:42 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Sasha Levin, devicetree, Kevin Hilman, linux-amlogic, Da Xue,
Jerome Brunet
From: Jerome Brunet <jbrunet@baylibre.com>
[ Upstream commit b7eb0e26cc4a212fde09144cd49d4103170d2b9e ]
There is actually several different libretech board with the CC suffix
so the model name is not appropriate here. Update to something more
specific
Reported-by: Da Xue <da@lessconfused.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
index d71cbf596d1f7..0814b6b29b86a 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
@@ -14,7 +14,7 @@
/ {
compatible = "libretech,cc", "amlogic,s905x", "amlogic,meson-gxl";
- model = "Libre Technology CC";
+ model = "Libre Computer Board AML-S905X-CC";
aliases {
serial0 = &uart_AO;
--
2.20.1
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 4+ messages in thread* [PATCH AUTOSEL 4.14 094/103] arm64: dts: meson: Fix erroneous SPI bus warnings
[not found] <20191108114310.14363-1-sashal@kernel.org>
` (2 preceding siblings ...)
2019-11-08 11:42 ` [PATCH AUTOSEL 4.14 082/103] arm64: dts: meson: libretech: update board model Sasha Levin
@ 2019-11-08 11:42 ` Sasha Levin
3 siblings, 0 replies; 4+ messages in thread
From: Sasha Levin @ 2019-11-08 11:42 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Sasha Levin, Rob Herring, devicetree, Kevin Hilman, Carlo Caione,
linux-amlogic
From: Rob Herring <robh@kernel.org>
[ Upstream commit 68ecb5c1920c5b98b1e717fd2349fba2ee5d4031 ]
dtc has new checks for SPI buses. The meson dts files have a node named
spi' which causes false positive warnings. As the node is a pinctrl child
node, change the node name to be 'spi-pins' to fix the warnings.
arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dtb: Warning (spi_bus_bridge): /soc/periphs@c8834000/pinctrl@4b0/spi: incorrect #address-cells for SPI bus
Cc: Carlo Caione <carlo@caione.org>
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: linux-amlogic@lists.infradead.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 2 +-
arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
index af834cdbba791..250b5c11c0e25 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
@@ -413,7 +413,7 @@
};
};
- spi_pins: spi {
+ spi_pins: spi-pins {
mux {
groups = "spi_miso",
"spi_mosi",
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
index fb8d76a17bc5d..3c30579449608 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
@@ -310,7 +310,7 @@
};
};
- spi_pins: spi {
+ spi_pins: spi-pins {
mux {
groups = "spi_miso",
"spi_mosi",
--
2.20.1
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 4+ messages in thread