Linux-Amlogic Archive on lore.kernel.org
 help / color / Atom feed
From: Neil Armstrong <narmstrong@baylibre.com>
To: mjourdan@baylibre.com
Cc: linux-amlogic@lists.infradead.org, linux-media@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	Neil Armstrong <narmstrong@baylibre.com>
Subject: [PATCH 0/3] media: meson: vdec: add sm1 platform
Date: Thu, 21 Nov 2019 11:14:26 +0100
Message-ID: <20191121101429.23831-1-narmstrong@baylibre.com> (raw)

This patchset adds support for the current Amlogic Video Decoder
driver for the Amlogic SM1 & compatible SoCs.

Then support is added for the currently supported MPEG1 & MPEG2 decoders
like for G12A support.

This patchset depends on G12A support patchset at [1].

M2M Decoder compliance is handled in a separate patchset at [2].

# v4l2-compliance 
v4l2-compliance SHA: 7ead0e1856b89f2e19369af452bb03fd0cd16793, 64 bits

Compliance test for meson-vdec device /dev/video0:

Driver Info:
	Driver name      : meson-vdec
	Card type        : Amlogic Video Decoder
	Bus info         : platform:meson-vdec
	Driver version   : 5.4.0
	Capabilities     : 0x84204000
		Video Memory-to-Memory Multiplanar
		Streaming
		Extended Pix Format
		Device Capabilities
	Device Caps      : 0x04204000
		Video Memory-to-Memory Multiplanar
		Streaming
		Extended Pix Format
	Detected Stateful Decoder

Required ioctls:
	test VIDIOC_QUERYCAP: OK

Allow for multiple opens:
	test second /dev/video0 open: OK
	test VIDIOC_QUERYCAP: OK
	test VIDIOC_G/S_PRIORITY: OK
	test for unlimited opens: OK

Debug ioctls:
	test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
	test VIDIOC_LOG_STATUS: OK (Not Supported)

Input ioctls:
	test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
	test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
	test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
	test VIDIOC_ENUMAUDIO: OK (Not Supported)
	test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
	test VIDIOC_G/S_AUDIO: OK (Not Supported)
	Inputs: 0 Audio Inputs: 0 Tuners: 0

Output ioctls:
	test VIDIOC_G/S_MODULATOR: OK (Not Supported)
	test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
	test VIDIOC_ENUMAUDOUT: OK (Not Supported)
	test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
	test VIDIOC_G/S_AUDOUT: OK (Not Supported)
	Outputs: 0 Audio Outputs: 0 Modulators: 0

Input/Output configuration ioctls:
	test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
	test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
	test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
	test VIDIOC_G/S_EDID: OK (Not Supported)

Control ioctls:
	test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
	test VIDIOC_QUERYCTRL: OK
	test VIDIOC_G/S_CTRL: OK
	test VIDIOC_G/S/TRY_EXT_CTRLS: OK
	test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
	test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
	Standard Controls: 2 Private Controls: 0

Format ioctls:
	test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
	test VIDIOC_G/S_PARM: OK (Not Supported)
	test VIDIOC_G_FBUF: OK (Not Supported)
	test VIDIOC_G_FMT: OK
	test VIDIOC_TRY_FMT: OK
	test VIDIOC_S_FMT: OK
	test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
	test Cropping: OK (Not Supported)
	test Composing: OK (Not Supported)
	test Scaling: OK (Not Supported)

Codec ioctls:
	test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
	test VIDIOC_G_ENC_INDEX: OK (Not Supported)
	test VIDIOC_(TRY_)DECODER_CMD: OK

Buffer ioctls:
	test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
	test VIDIOC_EXPBUF: OK
	test Requests: OK (Not Supported)

Total for meson-vdec device /dev/video0: 44, Succeeded: 44, Failed: 0, Warnings: 0

[1] https://lore.kernel.org/linux-media/20191120111430.29552-1-narmstrong@baylibre.com
[2] https://lore.kernel.org/linux-media/20191007145909.29979-1-mjourdan@baylibre.com

Neil Armstrong (3):
  dt-bindings: media: amlogic,gx-vdec: add bindings for SM1 family
  media: meson: vdec: add sm1 platform
  arm64: dts: meson-sm1: add video decoder compatible

 .../bindings/media/amlogic,gx-vdec.yaml       |  2 ++
 arch/arm64/boot/dts/amlogic/meson-sm1.dtsi    |  4 +++
 drivers/staging/media/meson/vdec/vdec.c       |  5 +++-
 drivers/staging/media/meson/vdec/vdec_1.c     | 29 ++++++++++++++----
 .../staging/media/meson/vdec/vdec_platform.c  | 30 +++++++++++++++++++
 .../staging/media/meson/vdec/vdec_platform.h  |  2 ++
 6 files changed, 65 insertions(+), 7 deletions(-)

-- 
2.22.0


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

             reply index

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-11-21 10:14 Neil Armstrong [this message]
2019-11-21 10:14 ` [PATCH 1/3] dt-bindings: media: amlogic, gx-vdec: add bindings for SM1 family Neil Armstrong
2019-12-04 19:27   ` [PATCH 1/3] dt-bindings: media: amlogic,gx-vdec: " Rob Herring
2019-11-21 10:14 ` [PATCH 2/3] media: meson: vdec: add sm1 platform Neil Armstrong
2019-11-21 10:14 ` [PATCH 3/3] arm64: dts: meson-sm1: add video decoder compatible Neil Armstrong
2019-12-13 16:53   ` Kevin Hilman

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191121101429.23831-1-narmstrong@baylibre.com \
    --to=narmstrong@baylibre.com \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=mjourdan@baylibre.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-Amlogic Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-amlogic/0 linux-amlogic/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-amlogic linux-amlogic/ https://lore.kernel.org/linux-amlogic \
		linux-amlogic@lists.infradead.org
	public-inbox-index linux-amlogic

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-amlogic


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git