From: Mohammad Rasim <mohammad.rasim96@gmail.com>
To: devicetree@vger.kernel.org, linux-amlogic@lists.infradead.org,
Rob Herring <robh+dt@kernel.org>,
Kevin Hilman <khilman@baylibre.com>,
Neil Armstrong <narmstrong@baylibre.com>,
Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: Mark Rutland <mark.rutland@arm.com>,
Mohammad Rasim <mohammad.rasim96@gmail.com>
Subject: [PATCH v3 2/2] arm64: dts: meson-gxbb: add support for
Date: Sat, 30 Nov 2019 14:58:24 +0300 [thread overview]
Message-ID: <20191130115824.31778-3-mohammad.rasim96@gmail.com> (raw)
In-Reply-To: <20191130115824.31778-1-mohammad.rasim96@gmail.com>
This patch adds support for the Videostrong KII Pro tv box which is
based on the gxbb-p201 reference design
The device tree includes a new compatible for bluetooth "brcm,bcm4335a0"
which was merged recently into torvalds tree
Signed-off-by: Mohammad Rasim <mohammad.rasim96@gmail.com>
---
arch/arm64/boot/dts/amlogic/Makefile | 1 +
.../boot/dts/amlogic/meson-gxbb-kii-pro.dts | 76 +++++++++++++++++++
2 files changed, 77 insertions(+)
create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts
diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
index 84afecba9ec0..a795a170dcab 100644
--- a/arch/arm64/boot/dts/amlogic/Makefile
+++ b/arch/arm64/boot/dts/amlogic/Makefile
@@ -6,6 +6,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-g12a-x96-max.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-g12b-a311d-khadas-vim3.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-g12b-s922x-khadas-vim3.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-g12b-odroid-n2.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-kii-pro.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-nanopi-k2.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-nexbox-a95x.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-odroidc2.dtb
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts
new file mode 100644
index 000000000000..5d120e6ca338
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts
@@ -0,0 +1,76 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Mohammad Rasim <mohammad.rasim96@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "meson-gxbb-p20x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+/ {
+ compatible = "videostrong,kii-pro", "amlogic,p201", "amlogic,s905", "amlogic,meson-gxbb";
+ model = "Videostrong KII Pro";
+
+ leds {
+ compatible = "gpio-leds";
+ red {
+ label = "status";
+ gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
+
+ button@0 {
+ label = "reset";
+ linux,code = <KEY_POWER>;
+ gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+};
+
+
+
+&uart_A {
+ status = "okay";
+ pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+ pinctrl-names = "default";
+ uart-has-rtscts;
+
+ bluetooth {
+ compatible = "brcm,bcm4335a0";
+ };
+};
+
+
+
+ðmac {
+ status = "okay";
+ pinctrl-0 = <ð_rmii_pins>;
+ pinctrl-names = "default";
+
+ phy-handle = <ð_phy0>;
+ phy-mode = "rmii";
+
+ mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eth_phy0: ethernet-phy@0 {
+ /* IC Plus IP101GR (0x02430c54) */
+ reg = <0>;
+ reset-assert-us = <10000>;
+ reset-deassert-us = <10000>;
+ reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
--
2.24.0
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
next prev parent reply other threads:[~2019-11-30 11:58 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-30 11:58 [PATCH v3 0/2] add support for videostrong KII Pro Mohammad Rasim
2019-11-30 11:58 ` [PATCH v3 1/2] dt-bindings: Add vendor prefix for Videostrong Mohammad Rasim
2019-11-30 13:45 ` Martin Blumenstingl
2019-11-30 17:11 ` Mohammad Rasim
2019-11-30 11:58 ` Mohammad Rasim [this message]
2019-11-30 13:59 ` [PATCH v3 2/2] arm64: dts: meson-gxbb: add support for Martin Blumenstingl
2019-11-30 17:47 ` Mohammad Rasim
2019-11-30 18:57 ` Martin Blumenstingl
2019-11-30 19:07 ` Mohammad Rasim
2019-11-30 19:12 ` Mohammad Rasim
2019-11-30 19:25 ` Martin Blumenstingl
2019-11-30 14:00 ` [PATCH v3 0/2] add support for videostrong KII Pro Martin Blumenstingl
2019-11-30 17:51 ` Mohammad Rasim
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191130115824.31778-3-mohammad.rasim96@gmail.com \
--to=mohammad.rasim96@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=khilman@baylibre.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=mark.rutland@arm.com \
--cc=martin.blumenstingl@googlemail.com \
--cc=narmstrong@baylibre.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).