linux-amlogic.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Remi Pommarel <repk@triplefau.lt>
To: Kishon Vijay Abraham I <kishon@ti.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
	Neil Armstrong <narmstrong@baylibre.com>,
	Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
	Kevin Hilman <khilman@baylibre.com>,
	linux-kernel@vger.kernel.org, Yue Wang <yue.wang@amlogic.com>,
	linux-pci@vger.kernel.org, Andrew Murray <andrew.murray@arm.com>,
	linux-amlogic@lists.infradead.org,
	Jerome Brunet <jbrunet@baylibre.com>
Subject: Re: [PATCH v2 3/3] PCI: amlogic: Use AXG PCIE and shared MIPI/PCIE PHYs
Date: Tue, 24 Dec 2019 17:41:22 +0100	[thread overview]
Message-ID: <20191224164122.GE7304@voidbox> (raw)
In-Reply-To: <ce9e2f14-cadd-a977-75d7-402a7ee04c7b@ti.com>

On Tue, Dec 24, 2019 at 03:44:41PM +0530, Kishon Vijay Abraham I wrote:
> Hi,
> 
> On 24/12/19 3:15 AM, Remi Pommarel wrote:
> > Now that PCIE PHY has been introduced for AXG, the whole has_shared_phy
> > logic can be mutualized between AXG and G12A platforms.
> > 
> > This also makes use of the optional MIPI/PCIE shared fonctionality PHY
> > found on AXG platforms, which need to be used in order to have reliable
> > PCIE communications.
> > 
> > Signed-off-by: Remi Pommarel <repk@triplefau.lt>
> > ---
> >  drivers/pci/controller/dwc/pci-meson.c | 140 ++++++++-----------------
> >  1 file changed, 46 insertions(+), 94 deletions(-)
> > 
> > diff --git a/drivers/pci/controller/dwc/pci-meson.c b/drivers/pci/controller/dwc/pci-meson.c
> > index 3772b02a5c55..3d12155c32f6 100644
> > --- a/drivers/pci/controller/dwc/pci-meson.c
> > +++ b/drivers/pci/controller/dwc/pci-meson.c
> > @@ -66,7 +66,6 @@
> >  #define PORT_CLK_RATE			100000000UL
> >  #define MAX_PAYLOAD_SIZE		256
> >  #define MAX_READ_REQ_SIZE		256
> > -#define MESON_PCIE_PHY_POWERUP		0x1c
> >  #define PCIE_RESET_DELAY		500
> >  #define PCIE_SHARED_RESET		1
> >  #define PCIE_NORMAL_RESET		0
> > @@ -81,26 +80,19 @@ enum pcie_data_rate {
> >  struct meson_pcie_mem_res {
> >  	void __iomem *elbi_base;
> >  	void __iomem *cfg_base;
> > -	void __iomem *phy_base;
> >  };
> >  
> >  struct meson_pcie_clk_res {
> >  	struct clk *clk;
> > -	struct clk *mipi_gate;
> >  	struct clk *port_clk;
> >  	struct clk *general_clk;
> >  };
> >  
> >  struct meson_pcie_rc_reset {
> > -	struct reset_control *phy;
> >  	struct reset_control *port;
> >  	struct reset_control *apb;
> >  };
> >  
> > -struct meson_pcie_param {
> > -	bool has_shared_phy;
> > -};
> > -
> >  struct meson_pcie {
> >  	struct dw_pcie pci;
> >  	struct meson_pcie_mem_res mem_res;
> > @@ -108,7 +100,7 @@ struct meson_pcie {
> >  	struct meson_pcie_rc_reset mrst;
> >  	struct gpio_desc *reset_gpio;
> >  	struct phy *phy;
> > -	const struct meson_pcie_param *param;
> > +	struct phy *shared_phy;
> >  };
> >  
> >  static struct reset_control *meson_pcie_get_reset(struct meson_pcie *mp,
> > @@ -130,13 +122,6 @@ static int meson_pcie_get_resets(struct meson_pcie *mp)
> >  {
> >  	struct meson_pcie_rc_reset *mrst = &mp->mrst;
> >  
> > -	if (!mp->param->has_shared_phy) {
> > -		mrst->phy = meson_pcie_get_reset(mp, "phy", PCIE_SHARED_RESET);
> > -		if (IS_ERR(mrst->phy))
> > -			return PTR_ERR(mrst->phy);
> > -		reset_control_deassert(mrst->phy);
> > -	}
> > -
> >  	mrst->port = meson_pcie_get_reset(mp, "port", PCIE_NORMAL_RESET);
> >  	if (IS_ERR(mrst->port))
> >  		return PTR_ERR(mrst->port);
> > @@ -162,22 +147,6 @@ static void __iomem *meson_pcie_get_mem(struct platform_device *pdev,
> >  	return devm_ioremap_resource(dev, res);
> >  }
> >  
> > -static void __iomem *meson_pcie_get_mem_shared(struct platform_device *pdev,
> > -					       struct meson_pcie *mp,
> > -					       const char *id)
> > -{
> > -	struct device *dev = mp->pci.dev;
> > -	struct resource *res;
> > -
> > -	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, id);
> > -	if (!res) {
> > -		dev_err(dev, "No REG resource %s\n", id);
> > -		return ERR_PTR(-ENXIO);
> > -	}
> > -
> > -	return devm_ioremap(dev, res->start, resource_size(res));
> > -}
> > -
> >  static int meson_pcie_get_mems(struct platform_device *pdev,
> >  			       struct meson_pcie *mp)
> >  {
> > @@ -189,14 +158,6 @@ static int meson_pcie_get_mems(struct platform_device *pdev,
> >  	if (IS_ERR(mp->mem_res.cfg_base))
> >  		return PTR_ERR(mp->mem_res.cfg_base);
> >  
> > -	/* Meson AXG SoC has two PCI controllers use same phy register */
> > -	if (!mp->param->has_shared_phy) {
> > -		mp->mem_res.phy_base =
> > -			meson_pcie_get_mem_shared(pdev, mp, "phy");
> > -		if (IS_ERR(mp->mem_res.phy_base))
> > -			return PTR_ERR(mp->mem_res.phy_base);
> > -	}
> > -
> >  	return 0;
> >  }
> >  
> > @@ -204,20 +165,40 @@ static int meson_pcie_power_on(struct meson_pcie *mp)
> >  {
> >  	int ret = 0;
> >  
> > -	if (mp->param->has_shared_phy) {
> > -		ret = phy_init(mp->phy);
> > -		if (ret)
> > -			return ret;
> > +	ret = phy_init(mp->phy);
> > +	if (ret)
> > +		goto err;
> >  
> > -		ret = phy_power_on(mp->phy);
> > -		if (ret) {
> > -			phy_exit(mp->phy);
> > -			return ret;
> > -		}
> > -	} else
> > -		writel(MESON_PCIE_PHY_POWERUP, mp->mem_res.phy_base);
> > +	ret = phy_init(mp->shared_phy);
> > +	if (ret)
> > +		goto exit;
> > +
> > +	ret = phy_power_on(mp->phy);
> > +	if (ret)
> > +		goto shared_exit;
> > +
> > +	ret = phy_power_on(mp->shared_phy);
> > +	if (ret)
> > +		goto power_off;
> >  
> >  	return 0;
> > +
> > +power_off:
> > +	phy_power_off(mp->phy);
> > +shared_exit:
> > +	phy_exit(mp->shared_phy);
> > +exit:
> > +	phy_exit(mp->phy);
> > +err:
> > +	return ret;
> > +}
> > +
> > +static void meson_pcie_power_off(struct meson_pcie *mp)
> > +{
> > +	phy_power_off(mp->shared_phy);
> > +	phy_power_off(mp->phy);
> > +	phy_exit(mp->shared_phy);
> > +	phy_exit(mp->phy);
> >  }
> >  
> >  static int meson_pcie_reset(struct meson_pcie *mp)
> > @@ -225,16 +206,13 @@ static int meson_pcie_reset(struct meson_pcie *mp)
> >  	struct meson_pcie_rc_reset *mrst = &mp->mrst;
> >  	int ret = 0;
> >  
> > -	if (mp->param->has_shared_phy) {
> > -		ret = phy_reset(mp->phy);
> > -		if (ret)
> > -			return ret;
> > -	} else {
> > -		reset_control_assert(mrst->phy);
> > -		udelay(PCIE_RESET_DELAY);
> > -		reset_control_deassert(mrst->phy);
> > -		udelay(PCIE_RESET_DELAY);
> > -	}
> > +	ret = phy_reset(mp->phy);
> > +	if (ret)
> > +		return ret;
> > +
> > +	ret = phy_reset(mp->shared_phy);
> > +	if (ret)
> > +		return ret;
> >  
> >  	reset_control_assert(mrst->port);
> >  	reset_control_assert(mrst->apb);
> > @@ -286,12 +264,6 @@ static int meson_pcie_probe_clocks(struct meson_pcie *mp)
> >  	if (IS_ERR(res->port_clk))
> >  		return PTR_ERR(res->port_clk);
> >  
> > -	if (!mp->param->has_shared_phy) {
> > -		res->mipi_gate = meson_pcie_probe_clock(dev, "mipi", 0);
> > -		if (IS_ERR(res->mipi_gate))
> > -			return PTR_ERR(res->mipi_gate);
> > -	}
> > -
> >  	res->general_clk = meson_pcie_probe_clock(dev, "general", 0);
> >  	if (IS_ERR(res->general_clk))
> >  		return PTR_ERR(res->general_clk);
> > @@ -562,7 +534,6 @@ static const struct dw_pcie_ops dw_pcie_ops = {
> >  
> >  static int meson_pcie_probe(struct platform_device *pdev)
> >  {
> > -	const struct meson_pcie_param *match_data;
> >  	struct device *dev = &pdev->dev;
> >  	struct dw_pcie *pci;
> >  	struct meson_pcie *mp;
> > @@ -576,18 +547,13 @@ static int meson_pcie_probe(struct platform_device *pdev)
> >  	pci->dev = dev;
> >  	pci->ops = &dw_pcie_ops;
> >  
> > -	match_data = of_device_get_match_data(dev);
> > -	if (!match_data) {
> > -		dev_err(dev, "failed to get match data\n");
> > -		return -ENODEV;
> > -	}
> > -	mp->param = match_data;
> > +	mp->phy = devm_phy_get(dev, "pcie");
> > +	if (IS_ERR(mp->phy))
> > +		return PTR_ERR(mp->phy);
> >  
> > -	if (mp->param->has_shared_phy) {
> > -		mp->phy = devm_phy_get(dev, "pcie");
> > -		if (IS_ERR(mp->phy))
> > -			return PTR_ERR(mp->phy);
> > -	}
> > +	mp->shared_phy = devm_phy_optional_get(dev, "shared");
> > +	if (IS_ERR(mp->phy))
> > +		return PTR_ERR(mp->phy);
> 
> This also requires dt-binding updation.Is PCIe connected to two
> different PHYs here?

Not exactly, it is that the PCIE PHY is using some non documented bits
from the range of the MIPI one. But now that I have read about syscon it
seems that those registers are defined to be handled by syscon subsystem
in the device tree.

Thus I think It would make much more sense to remove the shared MIPI/PCIE
PHY driver in patch 1/3 and set the appropriate bits in the PCIE PHY
driver itself from patch 2/3 through syscon subsystem.

Sorry for the noise, will send v3 with only 1 PHY driver and appropriate
binding documentation.

Thanks,

-- 
Remi

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

      reply	other threads:[~2019-12-24 16:33 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-12-23 21:45 [PATCH v2 0/3] PCI: amlogic: Make PCIe working reliably on AXG platforms Remi Pommarel
2019-12-23 21:45 ` [PATCH v2 1/3] phy: amlogic: Add Amlogic AXG MIPI/PCIE PHY Driver Remi Pommarel
2019-12-24 10:10   ` Kishon Vijay Abraham I
2019-12-24 16:30     ` Remi Pommarel
2019-12-26  9:25       ` Jerome Brunet
2019-12-26  9:39   ` Jerome Brunet
2019-12-26 20:11     ` Remi Pommarel
2020-01-07 10:08       ` Jerome Brunet
2019-12-23 21:45 ` [PATCH v2 2/3] phy: amlogic: Add Amlogic AXG PCIE " Remi Pommarel
2019-12-24 10:12   ` Kishon Vijay Abraham I
2019-12-23 21:45 ` [PATCH v2 3/3] PCI: amlogic: Use AXG PCIE and shared MIPI/PCIE PHYs Remi Pommarel
2019-12-24 10:14   ` Kishon Vijay Abraham I
2019-12-24 16:41     ` Remi Pommarel [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191224164122.GE7304@voidbox \
    --to=repk@triplefau.lt \
    --cc=andrew.murray@arm.com \
    --cc=jbrunet@baylibre.com \
    --cc=khilman@baylibre.com \
    --cc=kishon@ti.com \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=martin.blumenstingl@googlemail.com \
    --cc=narmstrong@baylibre.com \
    --cc=yue.wang@amlogic.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).