linux-amlogic.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Rob Herring <robh@kernel.org>
To: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: mark.rutland@arm.com, devicetree@vger.kernel.org,
	ulf.hansson@linaro.org, jianxin.pan@amlogic.com,
	linux-mmc@vger.kernel.org, linux-kernel@vger.kernel.org,
	yinxin_1989@aliyun.com, linux-amlogic@lists.infradead.org,
	linux-arm-kernel@lists.infradead.org, lnykww@gmail.com
Subject: Re: [PATCH v4 1/3] dt-bindings: mmc: Document the Amlogic Meson SDHC MMC host controller
Date: Mon, 13 Jan 2020 15:10:20 -0600	[thread overview]
Message-ID: <20200113211020.GA12476@bogus> (raw)
In-Reply-To: <20200112002459.2124850-2-martin.blumenstingl@googlemail.com>

On Sun, Jan 12, 2020 at 01:24:57AM +0100, Martin Blumenstingl wrote:
> This documents the devicetree bindings for the SDHC MMC host controller
> found in Meson6, Meson8, Meson8b and Meson8m2 SoCs. It can use a
> bus-width of 1/4/8-bit and it supports eMMC spec 4.4x/4.5x including
> HS200 mode (up to 100MHz clock). It embeds an internal clock controller
> which outputs four clocks (mod_clk, sd_clk, tx_clk and rx_clk) and is
> fed by four external input clocks (clkin[0-3]). "pclk" is the module
> register clock, it has to be enabled to access the registers.
> 
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> ---
>  .../bindings/mmc/amlogic,meson-mx-sdhc.yaml   | 83 +++++++++++++++++++
>  .../dt-bindings/clock/meson-mx-sdhc-clkc.h    |  8 ++
>  2 files changed, 91 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mmc/amlogic,meson-mx-sdhc.yaml
>  create mode 100644 include/dt-bindings/clock/meson-mx-sdhc-clkc.h

Fails 'make dt_binding_check':

Documentation/devicetree/bindings/mmc/amlogic,meson-mx-sdhc.example.dts:17:53: 
warning: extra tokens at end of #include directive
 #include <dt-bindings/clock/meson-mx-sdhc-clkc.yaml>;
                                                     ^
Documentation/devicetree/bindings/mmc/amlogic,meson-mx-sdhc.example.dts:17:10: 
fatal error: dt-bindings/clock/meson-mx-sdhc-clkc.yaml: No such file or directory
 #include <dt-bindings/clock/meson-mx-sdhc-clkc.yaml>;
          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

> 
> diff --git a/Documentation/devicetree/bindings/mmc/amlogic,meson-mx-sdhc.yaml b/Documentation/devicetree/bindings/mmc/amlogic,meson-mx-sdhc.yaml
> new file mode 100644
> index 000000000000..74632692ce26
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mmc/amlogic,meson-mx-sdhc.yaml
> @@ -0,0 +1,83 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mmc/amlogic,meson-mx-sdhc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Amlogic Meson SDHC controller Device Tree Bindings
> +
> +allOf:
> +  - $ref: "mmc-controller.yaml"
> +
> +maintainers:
> +  - Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> +
> +description: |
> +  The SDHC MMC host controller on Amlogic SoCs provides an eMMC and MMC
> +  card interface with 1/4/8-bit bus width.
> +  It supports eMMC spec 4.4x/4.5x including HS200 (up to 100MHz clock).
> +
> +properties:
> +  compatible:
> +    items:
> +      - enum:
> +        - amlogic,meson8-sdhc
> +        - amlogic,meson8b-sdhc
> +        - amlogic,meson8m2-sdhc
> +      - const: amlogic,meson-mx-sdhc
> +
> +  reg:
> +    minItems: 1
> +
> +  interrupts:
> +    minItems: 1
> +
> +  "#clock-cells":
> +    const: 1
> +
> +  clocks:
> +    minItems: 9
> +
> +  clock-names:
> +    items:
> +      - const: pclk
> +      - const: mod_clk
> +      - const: sd_clk
> +      - const: rx_clk
> +      - const: tx_clk
> +      - const: clkin0
> +      - const: clkin1
> +      - const: clkin2
> +      - const: clkin3

Kind of odd to put the output clocks in the middle of the list.

> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - "#clock-cells"
> +  - clocks
> +  - clock-names
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/meson-mx-sdhc-clkc.yaml>;
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +    sdhc: mmc@8e00 {
> +      compatible = "amlogic,meson8-sdhc", "amlogic,meson-mx-sdhc";
> +      reg = <0x8e00 0x42>;
> +      interrupts = <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>;
> +      #clock-cells = <1>;
> +      clocks = <&sdhc_pclk>,
> +               <&sdhc SDHC_CLKID_MOD_CLK>,
> +               <&sdhc SDHC_CLKID_SD_CLK>,
> +               <&sdhc SDHC_CLKID_TX_CLK>,
> +               <&sdhc SDHC_CLKID_RX_CLK>,
> +               <&xtal>,
> +               <&fclk_div4>,
> +               <&fclk_div3>,
> +               <&fclk_div5>;
> +      clock-names = "pclk", "mod_clk", "sd_clk", "tx_clk", "rx_clk",
> +                    "clkin0", "clkin1", "clkin2", "clkin3";
> +    };
> diff --git a/include/dt-bindings/clock/meson-mx-sdhc-clkc.h b/include/dt-bindings/clock/meson-mx-sdhc-clkc.h
> new file mode 100644
> index 000000000000..ad9f6e4dc426
> --- /dev/null
> +++ b/include/dt-bindings/clock/meson-mx-sdhc-clkc.h
> @@ -0,0 +1,8 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +
> +#define SDHC_CLKID_SRC_SEL	0
> +#define SDHC_CLKID_DIV		1
> +#define SDHC_CLKID_MOD_CLK	2
> +#define SDHC_CLKID_SD_CLK	3
> +#define SDHC_CLKID_TX_CLK	4
> +#define SDHC_CLKID_RX_CLK	5
> -- 
> 2.24.1
> 

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

  reply	other threads:[~2020-01-13 21:10 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-01-12  0:24 [PATCH v4 0/3] Amlogic 32-bit Meson SoC SDHC MMC controller driver Martin Blumenstingl
2020-01-12  0:24 ` [PATCH v4 1/3] dt-bindings: mmc: Document the Amlogic Meson SDHC MMC host controller Martin Blumenstingl
2020-01-13 21:10   ` Rob Herring [this message]
2020-01-14 20:12     ` Martin Blumenstingl
2020-01-12  0:24 ` [PATCH v4 2/3] clk: meson: add a driver for the Meson8/8b/8m2 SDHC clock controller Martin Blumenstingl
2020-01-12  0:24 ` [PATCH v4 3/3] mmc: host: meson-mx-sdhc: new driver for the Amlogic Meson SDHC host Martin Blumenstingl

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200113211020.GA12476@bogus \
    --to=robh@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=jianxin.pan@amlogic.com \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=lnykww@gmail.com \
    --cc=mark.rutland@arm.com \
    --cc=martin.blumenstingl@googlemail.com \
    --cc=ulf.hansson@linaro.org \
    --cc=yinxin_1989@aliyun.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).