From: Martin Blumenstingl <martin.blumenstingl@googlemail.com> [ Upstream commit 51496e4446875726d50a5617a6e0e0dabbc2e6da ] The pre-divider allows configuring longer PWM periods compared to using the input clock directly. The pre-divider is 7 bit wide, meaning it's maximum value is 128 (the register value is off-by-one: 0x7f or 127). Change the loop to also allow for the maximum possible value to be considered valid. Fixes: 211ed630753d2f ("pwm: Add support for Meson PWM Controller") Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org> --- drivers/pwm/pwm-meson.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/pwm/pwm-meson.c b/drivers/pwm/pwm-meson.c index 9b79cbc7a715..9551f896dd6f 100644 --- a/drivers/pwm/pwm-meson.c +++ b/drivers/pwm/pwm-meson.c @@ -188,7 +188,7 @@ static int meson_pwm_calc(struct meson_pwm *meson, do_div(fin_ps, fin_freq); /* Calc pre_div with the period */ - for (pre_div = 0; pre_div < MISC_CLK_DIV_MASK; pre_div++) { + for (pre_div = 0; pre_div <= MISC_CLK_DIV_MASK; pre_div++) { cnt = DIV_ROUND_CLOSEST_ULL((u64)period * 1000, fin_ps * (pre_div + 1)); dev_dbg(meson->chip.dev, "fin_ps=%llu pre_div=%u cnt=%u\n", @@ -197,7 +197,7 @@ static int meson_pwm_calc(struct meson_pwm *meson, break; } - if (pre_div == MISC_CLK_DIV_MASK) { + if (pre_div > MISC_CLK_DIV_MASK) { dev_err(meson->chip.dev, "unable to get period pre_div\n"); return -EINVAL; } -- 2.20.1 _______________________________________________ linux-amlogic mailing list linux-amlogic@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-amlogic
From: Bichao Zheng <bichao.zheng@amlogic.com> [ Upstream commit a279345807e1e0ae79567a52cfdd9d30c9174a3c ] There is an abnormally low about 20ms,when setting duty repeatedly. Because setting the duty will disable PWM and then enable. Delete this operation now. Fixes: 211ed630753d2f ("pwm: Add support for Meson PWM Controller") Signed-off-by: Bichao Zheng <bichao.zheng@amlogic.com> [ Dropped code instead of hiding it behind a comment ] Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org> --- drivers/pwm/pwm-meson.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/drivers/pwm/pwm-meson.c b/drivers/pwm/pwm-meson.c index 9551f896dd6f..3d2c36963a4f 100644 --- a/drivers/pwm/pwm-meson.c +++ b/drivers/pwm/pwm-meson.c @@ -325,11 +325,6 @@ static int meson_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm, if (state->period != channel->state.period || state->duty_cycle != channel->state.duty_cycle || state->polarity != channel->state.polarity) { - if (channel->state.enabled) { - meson_pwm_disable(meson, pwm->hwpwm); - channel->state.enabled = false; - } - if (state->polarity != channel->state.polarity) { if (state->polarity == PWM_POLARITY_NORMAL) meson->inverter_mask |= BIT(pwm->hwpwm); -- 2.20.1 _______________________________________________ linux-amlogic mailing list linux-amlogic@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-amlogic
From: Jerome Brunet <jbrunet@baylibre.com> [ Upstream commit 9f72e321d5506fe3e162a6308a4a295d7f10bb5d ] The eMMC on this board is add-on module which is not mandatory. Removing 'non-removable' property should prevent some errors when booting a board w/o an eMMC module present. Fixes: 72fb2c852188 ("ARM64: dts: meson-gxl-s905x-libretech-cc: fixup board definition") Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Martin Blumenstingl<martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Sasha Levin <sashal@kernel.org> --- arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts index e2c71753e327..407d32f4fe73 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts @@ -226,7 +226,6 @@ cap-mmc-highspeed; mmc-ddr-3_3v; max-frequency = <50000000>; - non-removable; disable-wp; mmc-pwrseq = <&emmc_pwrseq>; -- 2.20.1 _______________________________________________ linux-amlogic mailing list linux-amlogic@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-amlogic
From: Dan Carpenter <dan.carpenter@oracle.com> [ Upstream commit f10210517a2f37feea2edf85eb34c98977265c16 ] The "dwmac->phy_mode" is an enum and in this context GCC treats it as an unsigned int so the error handling is never triggered. Fixes: 566e82516253 ("net: stmmac: add a glue driver for the Amlogic Meson 8b / GXBB DWMAC") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> --- drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c index 8be4b32544ef..d71d3c1c85ee 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c @@ -285,7 +285,7 @@ static int meson8b_dwmac_probe(struct platform_device *pdev) dwmac->pdev = pdev; dwmac->phy_mode = of_get_phy_mode(pdev->dev.of_node); - if (dwmac->phy_mode < 0) { + if ((int)dwmac->phy_mode < 0) { dev_err(&pdev->dev, "missing phy-mode property\n"); ret = -EINVAL; goto err_remove_config_dt; -- 2.20.1 _______________________________________________ linux-amlogic mailing list linux-amlogic@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-amlogic
From: Christian Hewitt <christianshewitt@gmail.com> [ Upstream commit d5f6fa904ecbadbb8e9fa6302b0fc165bec0559a ] Fix DTC warnings: arch/arm/dts/meson-gxl-s905x-khadas-vim.dtb: Warning (avoid_unnecessary_addr_size): /gpio-keys-polled: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property Fixes: e15d2774b8c0 ("ARM64: dts: meson-gxl: add support for the Khadas VIM board") Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Sasha Levin <sashal@kernel.org> --- arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts index fb5db5f33e8c..ce4a116382bf 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts @@ -33,11 +33,9 @@ gpio-keys-polled { compatible = "gpio-keys-polled"; - #address-cells = <1>; - #size-cells = <0>; poll-interval = <100>; - button@0 { + power-button { label = "power"; linux,code = <KEY_POWER>; gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>; -- 2.20.1 _______________________________________________ linux-amlogic mailing list linux-amlogic@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-amlogic