[PATCH AUTOSEL 4.14 198/371] pwm: meson: Consider 128 a valid pre-divider

[PATCH AUTOSEL 4.14 198/371] pwm: meson: Consider 128 a valid pre-divider

[Sasha Levin]

From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

[ Upstream commit 51496e4446875726d50a5617a6e0e0dabbc2e6da ]

The pre-divider allows configuring longer PWM periods compared to using
the input clock directly. The pre-divider is 7 bit wide, meaning it's
maximum value is 128 (the register value is off-by-one: 0x7f or 127).

Change the loop to also allow for the maximum possible value to be
considered valid.

Fixes: 211ed630753d2f ("pwm: Add support for Meson PWM Controller")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pwm/pwm-meson.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/pwm/pwm-meson.c b/drivers/pwm/pwm-meson.c
index 9b79cbc7a715..9551f896dd6f 100644
--- a/drivers/pwm/pwm-meson.c
+++ b/drivers/pwm/pwm-meson.c
@@ -188,7 +188,7 @@ static int meson_pwm_calc(struct meson_pwm *meson,
 	do_div(fin_ps, fin_freq);
 
 	/* Calc pre_div with the period */
-	for (pre_div = 0; pre_div < MISC_CLK_DIV_MASK; pre_div++) {
+	for (pre_div = 0; pre_div <= MISC_CLK_DIV_MASK; pre_div++) {
 		cnt = DIV_ROUND_CLOSEST_ULL((u64)period * 1000,
 					    fin_ps * (pre_div + 1));
 		dev_dbg(meson->chip.dev, "fin_ps=%llu pre_div=%u cnt=%u\n",
@@ -197,7 +197,7 @@ static int meson_pwm_calc(struct meson_pwm *meson,
 			break;
 	}
 
-	if (pre_div == MISC_CLK_DIV_MASK) {
+	if (pre_div > MISC_CLK_DIV_MASK) {
 		dev_err(meson->chip.dev, "unable to get period pre_div\n");
 		return -EINVAL;
 	}
-- 
2.20.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH AUTOSEL 4.14 199/371] pwm: meson: Don't disable PWM when setting duty repeatedly

[Sasha Levin]

From: Bichao Zheng <bichao.zheng@amlogic.com>

[ Upstream commit a279345807e1e0ae79567a52cfdd9d30c9174a3c ]

There is an abnormally low about 20ms,when setting duty repeatedly.
Because setting the duty will disable PWM and then enable. Delete
this operation now.

Fixes: 211ed630753d2f ("pwm: Add support for Meson PWM Controller")
Signed-off-by: Bichao Zheng <bichao.zheng@amlogic.com>
[ Dropped code instead of hiding it behind a comment ]
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pwm/pwm-meson.c | 5 -----
 1 file changed, 5 deletions(-)

diff --git a/drivers/pwm/pwm-meson.c b/drivers/pwm/pwm-meson.c
index 9551f896dd6f..3d2c36963a4f 100644
--- a/drivers/pwm/pwm-meson.c
+++ b/drivers/pwm/pwm-meson.c
@@ -325,11 +325,6 @@ static int meson_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
 	if (state->period != channel->state.period ||
 	    state->duty_cycle != channel->state.duty_cycle ||
 	    state->polarity != channel->state.polarity) {
-		if (channel->state.enabled) {
-			meson_pwm_disable(meson, pwm->hwpwm);
-			channel->state.enabled = false;
-		}
-
 		if (state->polarity != channel->state.polarity) {
 			if (state->polarity == PWM_POLARITY_NORMAL)
 				meson->inverter_mask |= BIT(pwm->hwpwm);
-- 
2.20.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH AUTOSEL 4.14 207/371] arm64: dts: meson: libretech-cc: set eMMC as removable

[Sasha Levin]

From: Jerome Brunet <jbrunet@baylibre.com>

[ Upstream commit 9f72e321d5506fe3e162a6308a4a295d7f10bb5d ]

The eMMC on this board is add-on module which is not mandatory. Removing
'non-removable' property should prevent some errors when booting a board
w/o an eMMC module present.

Fixes: 72fb2c852188 ("ARM64: dts: meson-gxl-s905x-libretech-cc: fixup board definition")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Martin Blumenstingl<martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
index e2c71753e327..407d32f4fe73 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
@@ -226,7 +226,6 @@
 	cap-mmc-highspeed;
 	mmc-ddr-3_3v;
 	max-frequency = <50000000>;
-	non-removable;
 	disable-wp;
 
 	mmc-pwrseq = <&emmc_pwrseq>;
-- 
2.20.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH AUTOSEL 4.14 306/371] net: stmmac: dwmac-meson8b: Fix signedness bug in probe

[Sasha Levin]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit f10210517a2f37feea2edf85eb34c98977265c16 ]

The "dwmac->phy_mode" is an enum and in this context GCC treats it as
an unsigned int so the error handling is never triggered.

Fixes: 566e82516253 ("net: stmmac: add a glue driver for the Amlogic Meson 8b / GXBB DWMAC")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c
index 8be4b32544ef..d71d3c1c85ee 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c
@@ -285,7 +285,7 @@ static int meson8b_dwmac_probe(struct platform_device *pdev)
 
 	dwmac->pdev = pdev;
 	dwmac->phy_mode = of_get_phy_mode(pdev->dev.of_node);
-	if (dwmac->phy_mode < 0) {
+	if ((int)dwmac->phy_mode < 0) {
 		dev_err(&pdev->dev, "missing phy-mode property\n");
 		ret = -EINVAL;
 		goto err_remove_config_dt;
-- 
2.20.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH AUTOSEL 4.14 335/371] arm64: dts: meson-gxl-s905x-khadas-vim: fix gpio-keys-polled node

[Sasha Levin]

From: Christian Hewitt <christianshewitt@gmail.com>

[ Upstream commit d5f6fa904ecbadbb8e9fa6302b0fc165bec0559a ]

Fix DTC warnings:

arch/arm/dts/meson-gxl-s905x-khadas-vim.dtb: Warning (avoid_unnecessary_addr_size):
   /gpio-keys-polled: unnecessary #address-cells/#size-cells
      without "ranges" or child "reg" property

Fixes: e15d2774b8c0 ("ARM64: dts: meson-gxl: add support for the Khadas VIM board")
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts
index fb5db5f33e8c..ce4a116382bf 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts
@@ -33,11 +33,9 @@
 
 	gpio-keys-polled {
 		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		poll-interval = <100>;
 
-		button@0 {
+		power-button {
 			label = "power";
 			linux,code = <KEY_POWER>;
 			gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
-- 
2.20.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic