From: Neil Armstrong <narmstrong@baylibre.com>
To: jbrunet@baylibre.com
Cc: linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org,
linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
Neil Armstrong <narmstrong@baylibre.com>
Subject: [PATCH 2/2] clk: meson: g12a: add support for the SPICC SCLK Source clocks
Date: Wed, 19 Feb 2020 09:49:28 +0100 [thread overview]
Message-ID: <20200219084928.28707-3-narmstrong@baylibre.com> (raw)
In-Reply-To: <20200219084928.28707-1-narmstrong@baylibre.com>
This adds the clocks used for the Amlogic G12A and compatible SoCs SPICC
controller to provide a more complete range of frequencies instead of the
SPICC internal divider over Xtal.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
drivers/clk/meson/g12a.c | 129 +++++++++++++++++++++++++++++++++++++++
drivers/clk/meson/g12a.h | 6 +-
2 files changed, 134 insertions(+), 1 deletion(-)
diff --git a/drivers/clk/meson/g12a.c b/drivers/clk/meson/g12a.c
index d2760a021301..fad616cac01e 100644
--- a/drivers/clk/meson/g12a.c
+++ b/drivers/clk/meson/g12a.c
@@ -3862,6 +3862,111 @@ static struct clk_regmap g12a_ts = {
},
};
+/* SPICC SCLK source clock */
+
+static const struct clk_parent_data spicc_sclk_parent_data[] = {
+ { .fw_name = "xtal", },
+ { .hw = &g12a_clk81.hw },
+ { .hw = &g12a_fclk_div4.hw },
+ { .hw = &g12a_fclk_div3.hw },
+ { .hw = &g12a_fclk_div5.hw },
+ { .hw = &g12a_fclk_div7.hw },
+};
+
+static struct clk_regmap g12a_spicc0_sclk_sel = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = HHI_SPICC_CLK_CNTL,
+ .mask = 7,
+ .shift = 7,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "spicc0_sclk_sel",
+ .ops = &clk_regmap_mux_ops,
+ .parent_data = spicc_sclk_parent_data,
+ .num_parents = ARRAY_SIZE(spicc_sclk_parent_data),
+ },
+};
+
+static struct clk_regmap g12a_spicc0_sclk_div = {
+ .data = &(struct clk_regmap_div_data){
+ .offset = HHI_SPICC_CLK_CNTL,
+ .shift = 0,
+ .width = 6,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "spicc0_sclk_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &g12a_spicc0_sclk_sel.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap g12a_spicc0_sclk = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = HHI_SPICC_CLK_CNTL,
+ .bit_idx = 6,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "spicc0_sclk",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &g12a_spicc0_sclk_div.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap g12a_spicc1_sclk_sel = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = HHI_SPICC_CLK_CNTL,
+ .mask = 7,
+ .shift = 23,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "spicc1_sclk_sel",
+ .ops = &clk_regmap_mux_ops,
+ .parent_data = spicc_sclk_parent_data,
+ .num_parents = ARRAY_SIZE(spicc_sclk_parent_data),
+ },
+};
+
+static struct clk_regmap g12a_spicc1_sclk_div = {
+ .data = &(struct clk_regmap_div_data){
+ .offset = HHI_SPICC_CLK_CNTL,
+ .shift = 16,
+ .width = 6,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "spicc1_sclk_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &g12a_spicc1_sclk_sel.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap g12a_spicc1_sclk = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = HHI_SPICC_CLK_CNTL,
+ .bit_idx = 22,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "spicc1_sclk",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &g12a_spicc1_sclk_div.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
#define MESON_GATE(_name, _reg, _bit) \
MESON_PCLK(_name, _reg, _bit, &g12a_clk81.hw)
@@ -4159,6 +4264,12 @@ static struct clk_hw_onecell_data g12a_hw_onecell_data = {
[CLKID_VDEC_HEVCF] = &g12a_vdec_hevcf.hw,
[CLKID_TS_DIV] = &g12a_ts_div.hw,
[CLKID_TS] = &g12a_ts.hw,
+ [CLKID_SPICC0_SCLK_SEL] = &g12a_spicc0_sclk_sel.hw,
+ [CLKID_SPICC0_SCLK_DIV] = &g12a_spicc0_sclk_div.hw,
+ [CLKID_SPICC0_SCLK] = &g12a_spicc0_sclk.hw,
+ [CLKID_SPICC1_SCLK_SEL] = &g12a_spicc1_sclk_sel.hw,
+ [CLKID_SPICC1_SCLK_DIV] = &g12a_spicc1_sclk_div.hw,
+ [CLKID_SPICC1_SCLK] = &g12a_spicc1_sclk.hw,
[NR_CLKS] = NULL,
},
.num = NR_CLKS,
@@ -4408,6 +4519,12 @@ static struct clk_hw_onecell_data g12b_hw_onecell_data = {
[CLKID_CPUB_CLK_AXI] = &g12b_cpub_clk_axi.hw,
[CLKID_CPUB_CLK_TRACE_SEL] = &g12b_cpub_clk_trace_sel.hw,
[CLKID_CPUB_CLK_TRACE] = &g12b_cpub_clk_trace.hw,
+ [CLKID_SPICC0_SCLK_SEL] = &g12a_spicc0_sclk_sel.hw,
+ [CLKID_SPICC0_SCLK_DIV] = &g12a_spicc0_sclk_div.hw,
+ [CLKID_SPICC0_SCLK] = &g12a_spicc0_sclk.hw,
+ [CLKID_SPICC1_SCLK_SEL] = &g12a_spicc1_sclk_sel.hw,
+ [CLKID_SPICC1_SCLK_DIV] = &g12a_spicc1_sclk_div.hw,
+ [CLKID_SPICC1_SCLK] = &g12a_spicc1_sclk.hw,
[NR_CLKS] = NULL,
},
.num = NR_CLKS,
@@ -4642,6 +4759,12 @@ static struct clk_hw_onecell_data sm1_hw_onecell_data = {
[CLKID_CPU1_CLK] = &sm1_cpu1_clk.hw,
[CLKID_CPU2_CLK] = &sm1_cpu2_clk.hw,
[CLKID_CPU3_CLK] = &sm1_cpu3_clk.hw,
+ [CLKID_SPICC0_SCLK_SEL] = &g12a_spicc0_sclk_sel.hw,
+ [CLKID_SPICC0_SCLK_DIV] = &g12a_spicc0_sclk_div.hw,
+ [CLKID_SPICC0_SCLK] = &g12a_spicc0_sclk.hw,
+ [CLKID_SPICC1_SCLK_SEL] = &g12a_spicc1_sclk_sel.hw,
+ [CLKID_SPICC1_SCLK_DIV] = &g12a_spicc1_sclk_div.hw,
+ [CLKID_SPICC1_SCLK] = &g12a_spicc1_sclk.hw,
[NR_CLKS] = NULL,
},
.num = NR_CLKS,
@@ -4877,6 +5000,12 @@ static struct clk_regmap *const g12a_clk_regmaps[] = {
&sm1_cpu1_clk,
&sm1_cpu2_clk,
&sm1_cpu3_clk,
+ &g12a_spicc0_sclk_sel,
+ &g12a_spicc0_sclk_div,
+ &g12a_spicc0_sclk,
+ &g12a_spicc1_sclk_sel,
+ &g12a_spicc1_sclk_div,
+ &g12a_spicc1_sclk,
};
static const struct reg_sequence g12a_init_regs[] = {
diff --git a/drivers/clk/meson/g12a.h b/drivers/clk/meson/g12a.h
index 9df4068aced1..a8852556836e 100644
--- a/drivers/clk/meson/g12a.h
+++ b/drivers/clk/meson/g12a.h
@@ -255,8 +255,12 @@
#define CLKID_DSU_CLK_DYN1 249
#define CLKID_DSU_CLK_DYN 250
#define CLKID_DSU_CLK_FINAL 251
+#define CLKID_SPICC0_SCLK_SEL 256
+#define CLKID_SPICC0_SCLK_DIV 257
+#define CLKID_SPICC1_SCLK_SEL 259
+#define CLKID_SPICC1_SCLK_DIV 260
-#define NR_CLKS 256
+#define NR_CLKS 262
/* include the CLKIDs that have been made part of the DT binding */
#include <dt-bindings/clock/g12a-clkc.h>
--
2.22.0
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
next prev parent reply other threads:[~2020-02-19 8:50 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-19 8:49 [PATCH 0/2] clk: meson: g12a: add support for the SPICC SCLK Source clocks Neil Armstrong
2020-02-19 8:49 ` [PATCH 1/2] dt-bindings: clk: g12a-clkc: add SPICC SCLK Source clock IDs Neil Armstrong
2020-02-26 15:29 ` Rob Herring
2020-02-19 8:49 ` Neil Armstrong [this message]
2020-02-19 17:57 ` [PATCH 0/2] clk: meson: g12a: add support for the SPICC SCLK Source clocks Jerome Brunet
2020-04-16 16:08 ` patchwork-bot+linux-amlogic
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200219084928.28707-3-narmstrong@baylibre.com \
--to=narmstrong@baylibre.com \
--cc=jbrunet@baylibre.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).