From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Neil Armstrong <narmstrong@baylibre.com>
Cc: jernej.skrabec@siol.net, jonas@kwiboo.se,
linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org,
a.hajda@samsung.com, boris.brezillon@collabora.com,
linux-amlogic@lists.infradead.org
Subject: Re: [PATCH v4 04/11] drm/bridge: synopsys: dw-hdmi: add bus format negociation
Date: Mon, 2 Mar 2020 12:18:15 +0200 [thread overview]
Message-ID: <20200302101815.GJ11960@pendragon.ideasonboard.com> (raw)
In-Reply-To: <20200206191834.6125-5-narmstrong@baylibre.com>
Hi Neil,
Thank you for the patch.
On Thu, Feb 06, 2020 at 08:18:27PM +0100, Neil Armstrong wrote:
> Add the atomic_get_output_bus_fmts, atomic_get_input_bus_fmts to negociate
> the possible output and input formats for the current mode and monitor,
> and use the negotiated formats in a basic atomic_check callback.
>
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> ---
> drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 272 +++++++++++++++++++++-
> 1 file changed, 268 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> index fec4a4bcd1fe..15048ad694bc 100644
> --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> @@ -2095,11 +2095,10 @@ static int dw_hdmi_setup(struct dw_hdmi *hdmi, struct drm_display_mode *mode)
> hdmi->hdmi_data.video_mode.mpixelrepetitionoutput = 0;
> hdmi->hdmi_data.video_mode.mpixelrepetitioninput = 0;
>
> - /* TOFIX: Get input format from plat data or fallback to RGB888 */
> if (hdmi->plat_data->input_bus_format)
> hdmi->hdmi_data.enc_in_bus_format =
> hdmi->plat_data->input_bus_format;
> - else
> + else if (hdmi->hdmi_data.enc_in_bus_format == MEDIA_BUS_FMT_FIXED)
> hdmi->hdmi_data.enc_in_bus_format = MEDIA_BUS_FMT_RGB888_1X24;
>
> /* TOFIX: Get input encoding from plat data or fallback to none */
> @@ -2109,8 +2108,8 @@ static int dw_hdmi_setup(struct dw_hdmi *hdmi, struct drm_display_mode *mode)
> else
> hdmi->hdmi_data.enc_in_encoding = V4L2_YCBCR_ENC_DEFAULT;
>
> - /* TOFIX: Default to RGB888 output format */
> - hdmi->hdmi_data.enc_out_bus_format = MEDIA_BUS_FMT_RGB888_1X24;
> + if (hdmi->hdmi_data.enc_out_bus_format == MEDIA_BUS_FMT_FIXED)
> + hdmi->hdmi_data.enc_out_bus_format = MEDIA_BUS_FMT_RGB888_1X24;
>
> hdmi->hdmi_data.pix_repet_factor = 0;
> hdmi->hdmi_data.hdcp_enable = 0;
> @@ -2388,6 +2387,267 @@ static const struct drm_connector_helper_funcs dw_hdmi_connector_helper_funcs =
> .atomic_check = dw_hdmi_connector_atomic_check,
> };
>
> +/*
> + * Possible output formats :
> + * - MEDIA_BUS_FMT_UYYVYY16_0_5X48,
> + * - MEDIA_BUS_FMT_UYYVYY12_0_5X36,
> + * - MEDIA_BUS_FMT_UYYVYY10_0_5X30,
> + * - MEDIA_BUS_FMT_UYYVYY8_0_5X24,
> + * - MEDIA_BUS_FMT_YUV16_1X48,
> + * - MEDIA_BUS_FMT_RGB161616_1X48,
> + * - MEDIA_BUS_FMT_UYVY12_1X24,
> + * - MEDIA_BUS_FMT_YUV12_1X36,
> + * - MEDIA_BUS_FMT_RGB121212_1X36,
> + * - MEDIA_BUS_FMT_UYVY10_1X20,
> + * - MEDIA_BUS_FMT_YUV10_1X30,
> + * - MEDIA_BUS_FMT_RGB101010_1X30,
> + * - MEDIA_BUS_FMT_UYVY8_1X16,
> + * - MEDIA_BUS_FMT_YUV8_1X24,
> + * - MEDIA_BUS_FMT_RGB888_1X24,
> + */
I'd drop this comment as I don't think it brings much, except for a risk
of getting out of sync with the implementation below :-)
> +
> +/* Can return a maximum of 12 possible output formats for a mode/connector */
> +#define MAX_OUTPUT_SEL_FORMATS 12
I count 11 below.
> +
> +static u32 *dw_hdmi_bridge_atomic_get_output_bus_fmts(struct drm_bridge *bridge,
> + struct drm_bridge_state *bridge_state,
> + struct drm_crtc_state *crtc_state,
> + struct drm_connector_state *conn_state,
> + unsigned int *num_output_fmts)
> +{
> + struct drm_connector *conn = conn_state->connector;
> + struct drm_display_info *info = &conn->display_info;
> + struct drm_display_mode *mode = &crtc_state->mode;
> + u8 max_bpc = conn_state->max_requested_bpc;
> + bool is_hdmi2_sink = info->hdmi.scdc.supported ||
> + (info->color_formats & DRM_COLOR_FORMAT_YCRCB420);
> + u32 *output_fmts;
> + int i = 0;
i is never negative, you can make it an unsigned int.
> +
> + *num_output_fmts = 0;
> +
> + output_fmts = kcalloc(MAX_OUTPUT_SEL_FORMATS, sizeof(*output_fmts),
> + GFP_KERNEL);
> + if (!output_fmts)
> + return NULL;
> +
> + /*
> + * If the current mode enforces 4:2:0, force the output but format
> + * to 4:2:0 and do not add the YUV422/444/RGB formats
> + */
> + if (conn->ycbcr_420_allowed &&
> + (drm_mode_is_420_only(info, mode) ||
> + (is_hdmi2_sink && drm_mode_is_420_also(info, mode)))) {
> +
> + /* Order bus formats from 16bit to 8bit if supported */
> + if (max_bpc >= 16 && info->bpc == 16 &&
> + (info->hdmi.y420_dc_modes & DRM_EDID_YCBCR420_DC_48))
> + output_fmts[i++] = MEDIA_BUS_FMT_UYYVYY16_0_5X48;
> +
> + if (max_bpc >= 12 && info->bpc >= 12 &&
> + (info->hdmi.y420_dc_modes & DRM_EDID_YCBCR420_DC_36))
> + output_fmts[i++] = MEDIA_BUS_FMT_UYYVYY12_0_5X36;
> +
> + if (max_bpc >= 10 && info->bpc >= 10 &&
> + (info->hdmi.y420_dc_modes & DRM_EDID_YCBCR420_DC_30))
> + output_fmts[i++] = MEDIA_BUS_FMT_UYYVYY10_0_5X30;
> +
> + /* Default 8bit fallback */
> + output_fmts[i++] = MEDIA_BUS_FMT_UYYVYY8_0_5X24;
> +
> + *num_output_fmts = i;
> +
> + return output_fmts;
> + }
> +
> + /*
> + * Order bus formats from 16bit to 8bit and from YUV422 to RGB
> + * if supported. In any case the default RGB888 format is added
> + */
> +
> + if (max_bpc >= 16 && info->bpc == 16) {
> + if (info->color_formats & DRM_COLOR_FORMAT_YCRCB444)
> + output_fmts[i++] = MEDIA_BUS_FMT_YUV16_1X48;
> +
> + output_fmts[i++] = MEDIA_BUS_FMT_RGB161616_1X48;
> + }
> +
> + if (max_bpc >= 12 && info->bpc >= 12) {
> + if (info->color_formats & DRM_COLOR_FORMAT_YCRCB422)
> + output_fmts[i++] = MEDIA_BUS_FMT_UYVY12_1X24;
> +
> + if (info->color_formats & DRM_COLOR_FORMAT_YCRCB444)
> + output_fmts[i++] = MEDIA_BUS_FMT_YUV12_1X36;
> +
> + output_fmts[i++] = MEDIA_BUS_FMT_RGB121212_1X36;
> + }
> +
> + if (max_bpc >= 10 && info->bpc >= 10) {
> + if (info->color_formats & DRM_COLOR_FORMAT_YCRCB422)
> + output_fmts[i++] = MEDIA_BUS_FMT_UYVY10_1X20;
> +
> + if (info->color_formats & DRM_COLOR_FORMAT_YCRCB444)
> + output_fmts[i++] = MEDIA_BUS_FMT_YUV10_1X30;
> +
> + output_fmts[i++] = MEDIA_BUS_FMT_RGB101010_1X30;
> + }
> +
> + if (info->color_formats & DRM_COLOR_FORMAT_YCRCB422)
> + output_fmts[i++] = MEDIA_BUS_FMT_UYVY8_1X16;
> +
> + if (info->color_formats & DRM_COLOR_FORMAT_YCRCB444)
> + output_fmts[i++] = MEDIA_BUS_FMT_YUV8_1X24;
> +
> + /* Default 8bit RGB fallback */
> + output_fmts[i++] = MEDIA_BUS_FMT_RGB888_1X24;
> +
> + *num_output_fmts = i;
> +
> + return output_fmts;
> +}
> +
> +/*
> + * Possible input formats :
> + * - MEDIA_BUS_FMT_RGB888_1X24
> + * - MEDIA_BUS_FMT_YUV8_1X24
> + * - MEDIA_BUS_FMT_UYVY8_1X16
> + * - MEDIA_BUS_FMT_UYYVYY8_0_5X24
> + * - MEDIA_BUS_FMT_RGB101010_1X30
> + * - MEDIA_BUS_FMT_YUV10_1X30
> + * - MEDIA_BUS_FMT_UYVY10_1X20
> + * - MEDIA_BUS_FMT_UYYVYY10_0_5X30
> + * - MEDIA_BUS_FMT_RGB121212_1X36
> + * - MEDIA_BUS_FMT_YUV12_1X36
> + * - MEDIA_BUS_FMT_UYVY12_1X24
> + * - MEDIA_BUS_FMT_UYYVYY12_0_5X36
> + * - MEDIA_BUS_FMT_RGB161616_1X48
> + * - MEDIA_BUS_FMT_YUV16_1X48
> + * - MEDIA_BUS_FMT_UYYVYY16_0_5X48
> + */
Same here.
> +
> +/* Can return a maximum of 4 possible input formats for an output format */
> +#define MAX_INPUT_SEL_FORMATS 4
As Boris pointed out, that should be 3.
> +
> +static u32 *dw_hdmi_bridge_atomic_get_input_bus_fmts(struct drm_bridge *bridge,
> + struct drm_bridge_state *bridge_state,
> + struct drm_crtc_state *crtc_state,
> + struct drm_connector_state *conn_state,
> + u32 output_fmt,
> + unsigned int *num_input_fmts)
> +{
> + u32 *input_fmts;
> + int i = 0;
i is never negative, you can make it an unsigned int.
> +
> + *num_input_fmts = 0;
> +
> + input_fmts = kcalloc(MAX_INPUT_SEL_FORMATS, sizeof(*input_fmts),
> + GFP_KERNEL);
> + if (!input_fmts)
> + return NULL;
> +
> + switch (output_fmt) {
> + /* 8bit */
> + case MEDIA_BUS_FMT_RGB888_1X24:
> + input_fmts[i++] = MEDIA_BUS_FMT_RGB888_1X24;
> + input_fmts[i++] = MEDIA_BUS_FMT_YUV8_1X24;
> + input_fmts[i++] = MEDIA_BUS_FMT_UYVY8_1X16;
> + break;
> + case MEDIA_BUS_FMT_YUV8_1X24:
> + input_fmts[i++] = MEDIA_BUS_FMT_YUV8_1X24;
> + input_fmts[i++] = MEDIA_BUS_FMT_UYVY8_1X16;
> + input_fmts[i++] = MEDIA_BUS_FMT_RGB888_1X24;
> + break;
> + case MEDIA_BUS_FMT_UYVY8_1X16:
> + input_fmts[i++] = MEDIA_BUS_FMT_UYVY8_1X16;
> + input_fmts[i++] = MEDIA_BUS_FMT_YUV8_1X24;
> + input_fmts[i++] = MEDIA_BUS_FMT_RGB888_1X24;
> + break;
> +
> + /* 10bit */
> + case MEDIA_BUS_FMT_RGB101010_1X30:
> + input_fmts[i++] = MEDIA_BUS_FMT_RGB101010_1X30;
> + input_fmts[i++] = MEDIA_BUS_FMT_YUV10_1X30;
> + input_fmts[i++] = MEDIA_BUS_FMT_UYVY10_1X20;
> + break;
> + case MEDIA_BUS_FMT_YUV10_1X30:
> + input_fmts[i++] = MEDIA_BUS_FMT_YUV10_1X30;
> + input_fmts[i++] = MEDIA_BUS_FMT_UYVY10_1X20;
> + input_fmts[i++] = MEDIA_BUS_FMT_RGB101010_1X30;
> + break;
> + case MEDIA_BUS_FMT_UYVY10_1X20:
> + input_fmts[i++] = MEDIA_BUS_FMT_UYVY10_1X20;
> + input_fmts[i++] = MEDIA_BUS_FMT_YUV10_1X30;
> + input_fmts[i++] = MEDIA_BUS_FMT_RGB101010_1X30;
> + break;
> +
> + /* 12bit */
> + case MEDIA_BUS_FMT_RGB121212_1X36:
> + input_fmts[i++] = MEDIA_BUS_FMT_RGB121212_1X36;
> + input_fmts[i++] = MEDIA_BUS_FMT_YUV12_1X36;
> + input_fmts[i++] = MEDIA_BUS_FMT_UYVY12_1X24;
> + break;
> + case MEDIA_BUS_FMT_YUV12_1X36:
> + input_fmts[i++] = MEDIA_BUS_FMT_YUV12_1X36;
> + input_fmts[i++] = MEDIA_BUS_FMT_UYVY12_1X24;
> + input_fmts[i++] = MEDIA_BUS_FMT_RGB121212_1X36;
> + break;
> + case MEDIA_BUS_FMT_UYVY12_1X24:
> + input_fmts[i++] = MEDIA_BUS_FMT_UYVY12_1X24;
> + input_fmts[i++] = MEDIA_BUS_FMT_YUV12_1X36;
> + input_fmts[i++] = MEDIA_BUS_FMT_RGB121212_1X36;
> + break;
> +
> + /* 16bit */
> + case MEDIA_BUS_FMT_RGB161616_1X48:
> + input_fmts[i++] = MEDIA_BUS_FMT_RGB161616_1X48;
> + input_fmts[i++] = MEDIA_BUS_FMT_YUV16_1X48;
> + break;
> + case MEDIA_BUS_FMT_YUV16_1X48:
> + input_fmts[i++] = MEDIA_BUS_FMT_YUV16_1X48;
> + input_fmts[i++] = MEDIA_BUS_FMT_RGB161616_1X48;
> + break;
> +
> + /* 420 */
s/420/YUV 4:2:0/ ?
> + case MEDIA_BUS_FMT_UYYVYY8_0_5X24:
> + case MEDIA_BUS_FMT_UYYVYY10_0_5X30:
> + case MEDIA_BUS_FMT_UYYVYY12_0_5X36:
> + case MEDIA_BUS_FMT_UYYVYY16_0_5X48:
> + input_fmts[i++] = output_fmt;
> + break;
> + }
> +
> + *num_input_fmts = i;
> +
> + if (*num_input_fmts == 0) {
> + kfree(input_fmts);
> + input_fmts = NULL;
> + }
> +
> + return input_fmts;
> +}
> +
> +static int dw_hdmi_bridge_atomic_check(struct drm_bridge *bridge,
> + struct drm_bridge_state *bridge_state,
> + struct drm_crtc_state *crtc_state,
> + struct drm_connector_state *conn_state)
> +{
> + struct dw_hdmi *hdmi = bridge->driver_private;
> +
> + dev_dbg(hdmi->dev, "selected output format %x\n",
s/%x/0x%04x/
> + bridge_state->output_bus_cfg.format);
Misalignment ?
> +
> + hdmi->hdmi_data.enc_out_bus_format =
> + bridge_state->output_bus_cfg.format;
> +
> + dev_dbg(hdmi->dev, "selected input format %x\n",
> + bridge_state->input_bus_cfg.format);
Same here. I would combine both messages:
dev_dbg(hdmi->dev, "input format: 0x%04x, output format: 0x04x\n",
bridge_state->input_bus_cfg.format,
bridge_state->output_bus_cfg.format);
> +
> + hdmi->hdmi_data.enc_in_bus_format =
> + bridge_state->input_bus_cfg.format;
> +
> + return 0;
> +}
> +
> static int dw_hdmi_bridge_attach(struct drm_bridge *bridge)
> {
> struct dw_hdmi *hdmi = bridge->driver_private;
> @@ -2499,6 +2759,9 @@ static const struct drm_bridge_funcs dw_hdmi_bridge_funcs = {
> .atomic_reset = drm_atomic_helper_bridge_reset,
> .attach = dw_hdmi_bridge_attach,
> .detach = dw_hdmi_bridge_detach,
> + .atomic_check = dw_hdmi_bridge_atomic_check,
> + .atomic_get_output_bus_fmts = dw_hdmi_bridge_atomic_get_output_bus_fmts,
> + .atomic_get_input_bus_fmts = dw_hdmi_bridge_atomic_get_input_bus_fmts,
> .enable = dw_hdmi_bridge_enable,
> .disable = dw_hdmi_bridge_disable,
> .mode_set = dw_hdmi_bridge_mode_set,
> @@ -2963,6 +3226,7 @@ __dw_hdmi_probe(struct platform_device *pdev,
>
> hdmi->bridge.driver_private = hdmi;
> hdmi->bridge.funcs = &dw_hdmi_bridge_funcs;
> +
This seems unrelated.
> #ifdef CONFIG_OF
> hdmi->bridge.of_node = pdev->dev.of_node;
> #endif
--
Regards,
Laurent Pinchart
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
next prev parent reply other threads:[~2020-03-02 10:18 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-06 19:18 [PATCH v4 00/11] drm/bridge: dw-hdmi: implement bus-format negotiation and YUV420 support Neil Armstrong
2020-02-06 19:18 ` [PATCH v4 01/11] drm/bridge: dw-hdmi: set mtmdsclock for deep color Neil Armstrong
2020-03-02 9:05 ` Laurent Pinchart
2020-03-02 9:21 ` Neil Armstrong
2020-03-02 15:54 ` Neil Armstrong
2020-03-02 16:01 ` Laurent Pinchart
2020-02-06 19:18 ` [PATCH v4 02/11] drm/bridge: dw-hdmi: add max bpc connector property Neil Armstrong
2020-02-17 6:38 ` Jernej Škrabec
2020-02-21 8:50 ` Neil Armstrong
2020-03-02 9:18 ` Laurent Pinchart
2020-03-02 15:55 ` Neil Armstrong
2020-02-06 19:18 ` [PATCH v4 03/11] drm/bridge: dw-hdmi: Plug atomic state hooks to the default implementation Neil Armstrong
2020-02-07 10:57 ` Boris Brezillon
2020-03-02 9:56 ` Laurent Pinchart
2020-03-02 15:55 ` Neil Armstrong
2020-02-06 19:18 ` [PATCH v4 04/11] drm/bridge: synopsys: dw-hdmi: add bus format negociation Neil Armstrong
2020-02-07 11:02 ` Boris Brezillon
2020-02-07 13:36 ` Neil Armstrong
2020-02-29 7:42 ` Jernej Škrabec
2020-02-29 10:09 ` Jonas Karlman
2020-02-29 11:07 ` Jernej Škrabec
2020-02-29 12:15 ` Jonas Karlman
2020-02-29 14:42 ` Jernej Škrabec
2020-03-02 8:08 ` Neil Armstrong
2020-03-02 8:04 ` Neil Armstrong
2020-03-02 10:18 ` Laurent Pinchart [this message]
2020-03-02 15:57 ` Neil Armstrong
2020-02-06 19:18 ` [PATCH v4 05/11] drm/bridge: synopsys: dw-hdmi: allow ycbcr420 modes for >= 0x200a Neil Armstrong
2020-02-07 13:38 ` Neil Armstrong
2020-03-02 10:03 ` Laurent Pinchart
2020-03-02 15:58 ` Neil Armstrong
2020-02-06 19:18 ` [PATCH v4 06/11] drm/meson: venc: make drm_display_mode const Neil Armstrong
2020-02-07 13:39 ` Neil Armstrong
2020-03-02 9:59 ` Laurent Pinchart
2020-02-06 19:18 ` [PATCH v4 07/11] drm/meson: meson_dw_hdmi: add bridge and switch to drm_bridge_funcs Neil Armstrong
2020-02-07 14:57 ` Boris Brezillon
2020-02-07 15:36 ` Neil Armstrong
2020-02-06 19:18 ` [PATCH v4 08/11] drm/meson: dw-hdmi: stop enforcing input_bus_format Neil Armstrong
2020-02-06 19:18 ` [PATCH v4 09/11] drm/meson: venc: add support for YUV420 setup Neil Armstrong
2020-02-06 19:18 ` [PATCH v4 10/11] drm/meson: vclk: " Neil Armstrong
2020-02-06 19:18 ` [PATCH v4 11/11] drm/meson: Add YUV420 output support Neil Armstrong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200302101815.GJ11960@pendragon.ideasonboard.com \
--to=laurent.pinchart@ideasonboard.com \
--cc=a.hajda@samsung.com \
--cc=boris.brezillon@collabora.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=jernej.skrabec@siol.net \
--cc=jonas@kwiboo.se \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=narmstrong@baylibre.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).