From: Jerome Brunet <jbrunet@baylibre.com>
To: Kevin Hilman <khilman@baylibre.com>
Cc: linux-amlogic@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
Jerome Brunet <jbrunet@baylibre.com>
Subject: [PATCH 5/7] arm64: dts: meson: libretech-pc: add internal DAC support
Date: Thu, 7 May 2020 00:16:54 +0200 [thread overview]
Message-ID: <20200506221656.477379-6-jbrunet@baylibre.com> (raw)
In-Reply-To: <20200506221656.477379-1-jbrunet@baylibre.com>
Add the internal DAC support on the libretech CC. The output of this
DAC is provided on the 9J4 connector.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
.../dts/amlogic/meson-gx-libretech-pc.dtsi | 31 +++++++++++++++++++
1 file changed, 31 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi
index 514fed57a5ce..c2480bab8d33 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi
@@ -30,6 +30,13 @@ aliases {
spi0 = &spifc;
};
+ dio2133: analog-amplifier {
+ compatible = "simple-audio-amplifier";
+ sound-name-prefix = "AU2";
+ VCC-supply = <&vcc5v>;
+ enable-gpios = <&gpio GPIOH_5 GPIO_ACTIVE_HIGH>;
+ };
+
chosen {
stdout-path = "serial0:115200n8";
};
@@ -180,6 +187,13 @@ vddio_card: regulator-vddio-card {
sound {
compatible = "amlogic,gx-sound-card";
model = "GXL-LIBRETECH-S9XX-PC";
+ audio-aux-devs = <&dio2133>;
+ audio-widgets = "Speaker", "7J4-14 LEFT",
+ "Speaker", "7J4-11 RIGHT";
+ audio-routing = "AU2 INL", "ACODEC LOLN",
+ "AU2 INR", "ACODEC LORN",
+ "7J4-14 LEFT", "AU2 OUTL",
+ "7J4-11 RIGHT", "AU2 OUTR";
assigned-clocks = <&clkc CLKID_MPLL0>,
<&clkc CLKID_MPLL1>,
<&clkc CLKID_MPLL2>;
@@ -201,6 +215,10 @@ dai-link-1 {
codec-0 {
sound-dai = <&aiu AIU_HDMI CTRL_I2S>;
};
+
+ codec-1 {
+ sound-dai = <&aiu AIU_ACODEC CTRL_I2S>;
+ };
};
dai-link-2 {
@@ -210,9 +228,22 @@ codec-0 {
sound-dai = <&hdmi_tx>;
};
};
+
+ dai-link-3 {
+ sound-dai = <&aiu AIU_ACODEC CTRL_OUT>;
+
+ codec-0 {
+ sound-dai = <&acodec>;
+ };
+ };
};
};
+&acodec {
+ AVDD-supply = <&vddio_ao18>;
+ status = "okay";
+};
+
&aiu {
status = "okay";
};
--
2.25.4
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
next prev parent reply other threads:[~2020-05-06 22:17 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-06 22:16 [PATCH 0/7] arm64: dts: meson: add internal audio DAC support Jerome Brunet
2020-05-06 22:16 ` [PATCH 1/7] arm64: dts: meson: gxl: add acodec support Jerome Brunet
2020-05-06 22:16 ` [PATCH 2/7] arm64: dts: meson: p230-q200: add internal DAC support Jerome Brunet
2020-05-06 22:16 ` [PATCH 3/7] arm64: dts: meson: libretech-cc: " Jerome Brunet
2020-05-06 22:16 ` [PATCH 4/7] arm64: dts: meson: libretech-ac: " Jerome Brunet
2020-05-06 22:16 ` Jerome Brunet [this message]
2020-05-06 22:16 ` [PATCH 6/7] arm64: dts: meson: g12: add internal DAC Jerome Brunet
2020-05-06 22:16 ` [PATCH 7/7] arm64: dts: meson: g12: add internal DAC glue Jerome Brunet
2020-05-20 0:01 ` [PATCH 0/7] arm64: dts: meson: add internal audio DAC support patchwork-bot+linux-amlogic
2020-05-20 0:07 ` Kevin Hilman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200506221656.477379-6-jbrunet@baylibre.com \
--to=jbrunet@baylibre.com \
--cc=devicetree@vger.kernel.org \
--cc=khilman@baylibre.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).