linux-amlogic.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
To: narmstrong@baylibre.com, jmasson@baylibre.com,
	linux-amlogic@lists.infradead.org
Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
	linux-arm-kernel@lists.infradead.org,
	dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org
Subject: [PATCH RESEND v1] drm/meson: viu: fix setting the OSD burst length in VIU_OSD1_FIFO_CTRL_STAT
Date: Sat, 20 Jun 2020 17:57:52 +0200	[thread overview]
Message-ID: <20200620155752.21065-1-martin.blumenstingl@googlemail.com> (raw)

The burst length is configured in VIU_OSD1_FIFO_CTRL_STAT[31] and
VIU_OSD1_FIFO_CTRL_STAT[11:10]. The public S905D3 datasheet describes
this as:
- 0x0 = up to 24 per burst
- 0x1 = up to 32 per burst
- 0x2 = up to 48 per burst
- 0x3 = up to 64 per burst
- 0x4 = up to 96 per burst
- 0x5 = up to 128 per burst

The lower two bits map to VIU_OSD1_FIFO_CTRL_STAT[11:10] while the upper
bit maps to VIU_OSD1_FIFO_CTRL_STAT[31].

Replace meson_viu_osd_burst_length_reg() with pre-defined macros which
set these values. meson_viu_osd_burst_length_reg() always returned 0
(for the two used values: 32 and 64 at least) and thus incorrectly set
the burst size to 24.

Fixes: 147ae1cbaa1842 ("drm: meson: viu: use proper macros instead of magic constants")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
re-send of v1 [0] with no changes as I still noticed that this is
sitting in my tree and I wasn't asked to change anything in v1.


[0] https://patchwork.kernel.org/patch/11510045/


 drivers/gpu/drm/meson/meson_registers.h |  6 ++++++
 drivers/gpu/drm/meson/meson_viu.c       | 11 ++---------
 2 files changed, 8 insertions(+), 9 deletions(-)

diff --git a/drivers/gpu/drm/meson/meson_registers.h b/drivers/gpu/drm/meson/meson_registers.h
index 8ea00546cd4e..049c4bfe2a3a 100644
--- a/drivers/gpu/drm/meson/meson_registers.h
+++ b/drivers/gpu/drm/meson/meson_registers.h
@@ -261,6 +261,12 @@
 #define VIU_OSD_FIFO_DEPTH_VAL(val)      ((val & 0x7f) << 12)
 #define VIU_OSD_WORDS_PER_BURST(words)   (((words & 0x4) >> 1) << 22)
 #define VIU_OSD_FIFO_LIMITS(size)        ((size & 0xf) << 24)
+#define VIU_OSD_BURST_LENGTH_24          (0x0 << 31 | 0x0 << 10)
+#define VIU_OSD_BURST_LENGTH_32          (0x0 << 31 | 0x1 << 10)
+#define VIU_OSD_BURST_LENGTH_48          (0x0 << 31 | 0x2 << 10)
+#define VIU_OSD_BURST_LENGTH_64          (0x0 << 31 | 0x3 << 10)
+#define VIU_OSD_BURST_LENGTH_96          (0x1 << 31 | 0x0 << 10)
+#define VIU_OSD_BURST_LENGTH_128         (0x1 << 31 | 0x1 << 10)
 
 #define VD1_IF0_GEN_REG 0x1a50
 #define VD1_IF0_CANVAS0 0x1a51
diff --git a/drivers/gpu/drm/meson/meson_viu.c b/drivers/gpu/drm/meson/meson_viu.c
index 304f8ff1339c..aede0c67a57f 100644
--- a/drivers/gpu/drm/meson/meson_viu.c
+++ b/drivers/gpu/drm/meson/meson_viu.c
@@ -411,13 +411,6 @@ void meson_viu_gxm_disable_osd1_afbc(struct meson_drm *priv)
 			    priv->io_base + _REG(VIU_MISC_CTRL1));
 }
 
-static inline uint32_t meson_viu_osd_burst_length_reg(uint32_t length)
-{
-	uint32_t val = (((length & 0x80) % 24) / 12);
-
-	return (((val & 0x3) << 10) | (((val & 0x4) >> 2) << 31));
-}
-
 void meson_viu_init(struct meson_drm *priv)
 {
 	uint32_t reg;
@@ -444,9 +437,9 @@ void meson_viu_init(struct meson_drm *priv)
 		VIU_OSD_FIFO_LIMITS(2);      /* fifo_lim: 2*16=32 */
 
 	if (meson_vpu_is_compatible(priv, VPU_COMPATIBLE_G12A))
-		reg |= meson_viu_osd_burst_length_reg(32);
+		reg |= VIU_OSD_BURST_LENGTH_32;
 	else
-		reg |= meson_viu_osd_burst_length_reg(64);
+		reg |= VIU_OSD_BURST_LENGTH_64;
 
 	writel_relaxed(reg, priv->io_base + _REG(VIU_OSD1_FIFO_CTRL_STAT));
 	writel_relaxed(reg, priv->io_base + _REG(VIU_OSD2_FIFO_CTRL_STAT));
-- 
2.27.0


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

             reply	other threads:[~2020-06-20 15:59 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-06-20 15:57 Martin Blumenstingl [this message]
2020-07-02  8:36 ` [PATCH RESEND v1] drm/meson: viu: fix setting the OSD burst length in VIU_OSD1_FIFO_CTRL_STAT Neil Armstrong
2020-07-13 19:21 ` patchwork-bot+linux-amlogic

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200620155752.21065-1-martin.blumenstingl@googlemail.com \
    --to=martin.blumenstingl@googlemail.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=jmasson@baylibre.com \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=narmstrong@baylibre.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).