[PATCH 0/2] arm64: dts: meson: add more SM1 soundcards

[PATCH 0/2] arm64: dts: meson: add more SM1 soundcards

[Christian Hewitt]

This series adds basic support for LPCM audio over HDMI interfaces
to the Khadas VIM3L (reusing the same config as the VIM3) and the
HardKernel ODROID-C4 devices. I'm sure support can be extended to
include other hardware but this gets the HDMI port working as a
minimum capability. I have personally tested with both devices.

Christian Hewitt (2):
  arm64: dts: meson: add audio playback to odroid-c4
  arm64: dts: meson: add audio playback to khadas-vim3l

 .../dts/amlogic/meson-sm1-khadas-vim3l.dts    | 88 +++++++++++++++++++
 .../boot/dts/amlogic/meson-sm1-odroid-c4.dts  | 88 +++++++++++++++++++
 2 files changed, 176 insertions(+)

-- 
2.17.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH 1/2] arm64: dts: meson: add audio playback to odroid-c4

[Christian Hewitt]

Add initial audio support limited to HDMI i2s.

Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
---
 .../boot/dts/amlogic/meson-sm1-odroid-c4.dts  | 88 +++++++++++++++++++
 1 file changed, 88 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts
index 00d90b30f8b4..cf5a98f0e47c 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts
@@ -8,6 +8,7 @@
 #include "meson-sm1.dtsi"
 #include <dt-bindings/gpio/meson-g12a-gpio.h>
 #include <dt-bindings/leds/common.h>
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
 
 / {
 	compatible = "hardkernel,odroid-c4", "amlogic,sm1";
@@ -186,6 +187,69 @@
 			};
 		};
 	};
+
+	sound {
+		compatible = "amlogic,axg-sound-card";
+		model = "SM1-ODROID-C4";
+		audio-aux-devs = <&tdmout_b>;
+		audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
+				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
+				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
+				"TDM_B Playback", "TDMOUT_B OUT";
+
+		assigned-clocks = <&clkc CLKID_MPLL2>,
+				  <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+		status = "okay";
+
+		dai-link-0 {
+			sound-dai = <&frddr_a>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&frddr_b>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&frddr_c>;
+		};
+
+		/* 8ch hdmi interface */
+		dai-link-3 {
+			sound-dai = <&tdmif_b>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			dai-tdm-slot-tx-mask-1 = <1 1>;
+			dai-tdm-slot-tx-mask-2 = <1 1>;
+			dai-tdm-slot-tx-mask-3 = <1 1>;
+			mclk-fs = <256>;
+
+			codec {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+			};
+		};
+
+		/* hdmi glue */
+		dai-link-4 {
+			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+			codec {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+};
+
+&arb {
+	status = "okay";
+};
+
+&clkc_audio {
+	status = "okay";
 };
 
 &cpu0 {
@@ -237,6 +301,18 @@
 	amlogic,tx-delay-ns = <2>;
 };
 
+&frddr_a {
+	status = "okay";
+};
+
+&frddr_b {
+	status = "okay";
+};
+
+&frddr_c {
+	status = "okay";
+};
+
 &gpio {
 	gpio-line-names =
 		/* GPIOZ */
@@ -381,6 +457,18 @@
 	vqmmc-supply = <&flash_1v8>;
 };
 
+&tdmif_b {
+	status = "okay";
+};
+
+&tdmout_b {
+	status = "okay";
+};
+
+&tohdmitx {
+	status = "okay";
+};
+
 &uart_AO {
 	status = "okay";
 	pinctrl-0 = <&uart_ao_a_pins>;
-- 
2.17.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH 2/2] arm64: dts: meson: add audio playback to khadas-vim3l

[Christian Hewitt]

Add initial audio support limited to HDMI i2s, copying the config
from the existing VIM3 device-tree.

Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
---
 .../dts/amlogic/meson-sm1-khadas-vim3l.dts    | 88 +++++++++++++++++++
 1 file changed, 88 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts
index dbbf29a0dbf6..b104967dbef1 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts
@@ -8,6 +8,7 @@
 
 #include "meson-sm1.dtsi"
 #include "meson-khadas-vim3.dtsi"
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
 
 / {
 	compatible = "khadas,vim3l", "amlogic,sm1";
@@ -31,6 +32,69 @@
 		regulator-boot-on;
 		regulator-always-on;
 	};
+
+	sound {
+		compatible = "amlogic,axg-sound-card";
+		model = "SM1-KHADAS-VIM3L";
+		audio-aux-devs = <&tdmout_a>;
+		audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 0",
+				"TDMOUT_A IN 1", "FRDDR_B OUT 0",
+				"TDMOUT_A IN 2", "FRDDR_C OUT 0",
+				"TDM_A Playback", "TDMOUT_A OUT";
+
+		assigned-clocks = <&clkc CLKID_MPLL2>,
+				  <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+		status = "okay";
+
+		dai-link-0 {
+			sound-dai = <&frddr_a>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&frddr_b>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&frddr_c>;
+		};
+
+		/* 8ch hdmi interface */
+		dai-link-3 {
+			sound-dai = <&tdmif_a>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			dai-tdm-slot-tx-mask-1 = <1 1>;
+			dai-tdm-slot-tx-mask-2 = <1 1>;
+			dai-tdm-slot-tx-mask-3 = <1 1>;
+			mclk-fs = <256>;
+
+			codec {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_A>;
+			};
+		};
+
+		/* hdmi glue */
+		dai-link-4 {
+			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+			codec {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+};
+
+&arb {
+	status = "okay";
+};
+
+&clkc_audio {
+	status = "okay";
 };
 
 &cpu0 {
@@ -61,6 +125,18 @@
 	clock-latency = <50000>;
 };
 
+&frddr_a {
+	status = "okay";
+};
+
+&frddr_b {
+	status = "okay";
+};
+
+&frddr_c {
+	status = "okay";
+};
+
 &pwm_AO_cd {
 	pinctrl-0 = <&pwm_ao_d_e_pins>;
 	pinctrl-names = "default";
@@ -93,3 +169,15 @@
 	phy-names = "usb2-phy0", "usb2-phy1";
 };
  */
+
+&tdmif_a {
+	status = "okay";
+};
+
+&tdmout_a {
+	status = "okay";
+};
+
+&tohdmitx {
+	status = "okay";
+};
-- 
2.17.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH 0/2] arm64: dts: meson: add more SM1 soundcards

[Jerome Brunet]

On Sat 18 Jul 2020 at 09:25, Christian Hewitt <christianshewitt@gmail.com> wrote:

> This series adds basic support for LPCM audio over HDMI interfaces
> to the Khadas VIM3L (reusing the same config as the VIM3) and the
> HardKernel ODROID-C4 devices. I'm sure support can be extended to
> include other hardware but this gets the HDMI port working as a
> minimum capability. I have personally tested with both devices.
>
> Christian Hewitt (2):
>   arm64: dts: meson: add audio playback to odroid-c4
>   arm64: dts: meson: add audio playback to khadas-vim3l
>
>  .../dts/amlogic/meson-sm1-khadas-vim3l.dts    | 88 +++++++++++++++++++
>  .../boot/dts/amlogic/meson-sm1-odroid-c4.dts  | 88 +++++++++++++++++++
>  2 files changed, 176 insertions(+)

Acked-by: Jerome Brunet <jbrunet@baylibre.com>

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH 0/2] arm64: dts: meson: add more SM1 soundcards

[Kevin Hilman]

On Sat, 18 Jul 2020 07:25:30 +0000, Christian Hewitt wrote:
> This series adds basic support for LPCM audio over HDMI interfaces
> to the Khadas VIM3L (reusing the same config as the VIM3) and the
> HardKernel ODROID-C4 devices. I'm sure support can be extended to
> include other hardware but this gets the HDMI port working as a
> minimum capability. I have personally tested with both devices.
> 
> Christian Hewitt (2):
>   arm64: dts: meson: add audio playback to odroid-c4
>   arm64: dts: meson: add audio playback to khadas-vim3l
> 
> [...]

Applied, thanks!

[1/2] arm64: dts: meson: add audio playback to odroid-c4
      commit: 725da67ce4d77540d4d6f7ecc3ac5a885a684716
[2/2] arm64: dts: meson: add audio playback to khadas-vim3l
      commit: b8b85d01be916a30c9863a5456c218d802e01d97

Best regards,
-- 
Kevin Hilman <khilman@baylibre.com>

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic