Linux-Amlogic Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH v2 0/3] arm64: dts: meson: add more G12/SM1 soundcards
@ 2020-07-19  2:45 Christian Hewitt
  2020-07-19  2:45 ` [PATCH v2 1/3] arm64: dts: meson: add audio playback to odroid-c4 Christian Hewitt
                   ` (2 more replies)
  0 siblings, 3 replies; 5+ messages in thread
From: Christian Hewitt @ 2020-07-19  2:45 UTC (permalink / raw)
  To: Rob Herring, Mark Rutland, Kevin Hilman, devicetree,
	linux-arm-kernel, linux-amlogic, linux-kernel
  Cc: Christian Hewitt

This series adds basic support for LPCM audio over HDMI interfaces
to the Khadas VIM3L (reusing the same config as the VIM3) and the
HardKernel ODROID-C4 devices, and HDMI + S/PDIF on U200 reference
board (reusing the config from the X96-Max box), I'm sure support
can be extended to include other hardware but this gets the HDMI
port working as a minimum capability. I have tested with VIM3L/C4
devices and a no-name S905X2 box.

v2 changes - include u200

Christian Hewitt (3):
  arm64: dts: meson: add audio playback to odroid-c4
  arm64: dts: meson: add audio playback to khadas-vim3l
  arm64: dts: meson: add audio playback to u200

 .../boot/dts/amlogic/meson-g12a-u200.dts      | 131 ++++++++++++++++++
 .../dts/amlogic/meson-sm1-khadas-vim3l.dts    |  88 ++++++++++++
 .../boot/dts/amlogic/meson-sm1-odroid-c4.dts  |  88 ++++++++++++
 3 files changed, 307 insertions(+)

-- 
2.17.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

^ permalink raw reply	[flat|nested] 5+ messages in thread

* [PATCH v2 1/3] arm64: dts: meson: add audio playback to odroid-c4
  2020-07-19  2:45 [PATCH v2 0/3] arm64: dts: meson: add more G12/SM1 soundcards Christian Hewitt
@ 2020-07-19  2:45 ` Christian Hewitt
  2020-07-19  2:45 ` [PATCH v2 2/3] arm64: dts: meson: add audio playback to khadas-vim3l Christian Hewitt
  2020-07-19  2:45 ` [PATCH v2 3/3] arm64: dts: meson: add audio playback to u200 Christian Hewitt
  2 siblings, 0 replies; 5+ messages in thread
From: Christian Hewitt @ 2020-07-19  2:45 UTC (permalink / raw)
  To: Rob Herring, Mark Rutland, Kevin Hilman, devicetree,
	linux-arm-kernel, linux-amlogic, linux-kernel
  Cc: Christian Hewitt

Add initial audio support limited to HDMI i2s.

Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
---
 .../boot/dts/amlogic/meson-sm1-odroid-c4.dts  | 88 +++++++++++++++++++
 1 file changed, 88 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts
index 00d90b30f8b4..cf5a98f0e47c 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts
@@ -8,6 +8,7 @@
 #include "meson-sm1.dtsi"
 #include <dt-bindings/gpio/meson-g12a-gpio.h>
 #include <dt-bindings/leds/common.h>
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
 
 / {
 	compatible = "hardkernel,odroid-c4", "amlogic,sm1";
@@ -186,6 +187,69 @@
 			};
 		};
 	};
+
+	sound {
+		compatible = "amlogic,axg-sound-card";
+		model = "SM1-ODROID-C4";
+		audio-aux-devs = <&tdmout_b>;
+		audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
+				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
+				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
+				"TDM_B Playback", "TDMOUT_B OUT";
+
+		assigned-clocks = <&clkc CLKID_MPLL2>,
+				  <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+		status = "okay";
+
+		dai-link-0 {
+			sound-dai = <&frddr_a>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&frddr_b>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&frddr_c>;
+		};
+
+		/* 8ch hdmi interface */
+		dai-link-3 {
+			sound-dai = <&tdmif_b>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			dai-tdm-slot-tx-mask-1 = <1 1>;
+			dai-tdm-slot-tx-mask-2 = <1 1>;
+			dai-tdm-slot-tx-mask-3 = <1 1>;
+			mclk-fs = <256>;
+
+			codec {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+			};
+		};
+
+		/* hdmi glue */
+		dai-link-4 {
+			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+			codec {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+};
+
+&arb {
+	status = "okay";
+};
+
+&clkc_audio {
+	status = "okay";
 };
 
 &cpu0 {
@@ -237,6 +301,18 @@
 	amlogic,tx-delay-ns = <2>;
 };
 
+&frddr_a {
+	status = "okay";
+};
+
+&frddr_b {
+	status = "okay";
+};
+
+&frddr_c {
+	status = "okay";
+};
+
 &gpio {
 	gpio-line-names =
 		/* GPIOZ */
@@ -381,6 +457,18 @@
 	vqmmc-supply = <&flash_1v8>;
 };
 
+&tdmif_b {
+	status = "okay";
+};
+
+&tdmout_b {
+	status = "okay";
+};
+
+&tohdmitx {
+	status = "okay";
+};
+
 &uart_AO {
 	status = "okay";
 	pinctrl-0 = <&uart_ao_a_pins>;
-- 
2.17.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

^ permalink raw reply	[flat|nested] 5+ messages in thread

* [PATCH v2 2/3] arm64: dts: meson: add audio playback to khadas-vim3l
  2020-07-19  2:45 [PATCH v2 0/3] arm64: dts: meson: add more G12/SM1 soundcards Christian Hewitt
  2020-07-19  2:45 ` [PATCH v2 1/3] arm64: dts: meson: add audio playback to odroid-c4 Christian Hewitt
@ 2020-07-19  2:45 ` Christian Hewitt
  2020-07-19  2:45 ` [PATCH v2 3/3] arm64: dts: meson: add audio playback to u200 Christian Hewitt
  2 siblings, 0 replies; 5+ messages in thread
From: Christian Hewitt @ 2020-07-19  2:45 UTC (permalink / raw)
  To: Rob Herring, Mark Rutland, Kevin Hilman, devicetree,
	linux-arm-kernel, linux-amlogic, linux-kernel
  Cc: Christian Hewitt

Add initial audio support limited to HDMI i2s, copying the config
from the existing VIM3 device-tree.

Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
---
 .../dts/amlogic/meson-sm1-khadas-vim3l.dts    | 88 +++++++++++++++++++
 1 file changed, 88 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts
index dbbf29a0dbf6..b104967dbef1 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts
@@ -8,6 +8,7 @@
 
 #include "meson-sm1.dtsi"
 #include "meson-khadas-vim3.dtsi"
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
 
 / {
 	compatible = "khadas,vim3l", "amlogic,sm1";
@@ -31,6 +32,69 @@
 		regulator-boot-on;
 		regulator-always-on;
 	};
+
+	sound {
+		compatible = "amlogic,axg-sound-card";
+		model = "SM1-KHADAS-VIM3L";
+		audio-aux-devs = <&tdmout_a>;
+		audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 0",
+				"TDMOUT_A IN 1", "FRDDR_B OUT 0",
+				"TDMOUT_A IN 2", "FRDDR_C OUT 0",
+				"TDM_A Playback", "TDMOUT_A OUT";
+
+		assigned-clocks = <&clkc CLKID_MPLL2>,
+				  <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+		status = "okay";
+
+		dai-link-0 {
+			sound-dai = <&frddr_a>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&frddr_b>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&frddr_c>;
+		};
+
+		/* 8ch hdmi interface */
+		dai-link-3 {
+			sound-dai = <&tdmif_a>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			dai-tdm-slot-tx-mask-1 = <1 1>;
+			dai-tdm-slot-tx-mask-2 = <1 1>;
+			dai-tdm-slot-tx-mask-3 = <1 1>;
+			mclk-fs = <256>;
+
+			codec {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_A>;
+			};
+		};
+
+		/* hdmi glue */
+		dai-link-4 {
+			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+			codec {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+};
+
+&arb {
+	status = "okay";
+};
+
+&clkc_audio {
+	status = "okay";
 };
 
 &cpu0 {
@@ -61,6 +125,18 @@
 	clock-latency = <50000>;
 };
 
+&frddr_a {
+	status = "okay";
+};
+
+&frddr_b {
+	status = "okay";
+};
+
+&frddr_c {
+	status = "okay";
+};
+
 &pwm_AO_cd {
 	pinctrl-0 = <&pwm_ao_d_e_pins>;
 	pinctrl-names = "default";
@@ -93,3 +169,15 @@
 	phy-names = "usb2-phy0", "usb2-phy1";
 };
  */
+
+&tdmif_a {
+	status = "okay";
+};
+
+&tdmout_a {
+	status = "okay";
+};
+
+&tohdmitx {
+	status = "okay";
+};
-- 
2.17.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

^ permalink raw reply	[flat|nested] 5+ messages in thread

* [PATCH v2 3/3] arm64: dts: meson: add audio playback to u200
  2020-07-19  2:45 [PATCH v2 0/3] arm64: dts: meson: add more G12/SM1 soundcards Christian Hewitt
  2020-07-19  2:45 ` [PATCH v2 1/3] arm64: dts: meson: add audio playback to odroid-c4 Christian Hewitt
  2020-07-19  2:45 ` [PATCH v2 2/3] arm64: dts: meson: add audio playback to khadas-vim3l Christian Hewitt
@ 2020-07-19  2:45 ` Christian Hewitt
  2020-07-21  9:06   ` Jerome Brunet
  2 siblings, 1 reply; 5+ messages in thread
From: Christian Hewitt @ 2020-07-19  2:45 UTC (permalink / raw)
  To: Rob Herring, Mark Rutland, Kevin Hilman, devicetree,
	linux-arm-kernel, linux-amlogic, linux-kernel
  Cc: Christian Hewitt

Add initial support limited to HDMI i2s and S/PDIF (LPCM).

Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
---
 .../boot/dts/amlogic/meson-g12a-u200.dts      | 131 ++++++++++++++++++
 1 file changed, 131 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts
index a26bfe72550f..dde7e258a184 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts
@@ -8,6 +8,7 @@
 #include "meson-g12a.dtsi"
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/gpio/meson-g12a-gpio.h>
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
 
 / {
 	compatible = "amlogic,u200", "amlogic,g12a";
@@ -18,6 +19,13 @@
 		ethernet0 = &ethmac;
 	};
 
+	spdif_dit: audio-codec-1 {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+		status = "okay";
+		sound-name-prefix = "DIT";
+	};
+
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
@@ -147,6 +155,91 @@
 		regulator-boot-on;
 		regulator-always-on;
 	};
+
+
+	sound {
+		compatible = "amlogic,axg-sound-card";
+		model = "G12A-U200";
+		audio-aux-devs = <&tdmout_b>;
+		audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
+				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
+				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
+				"TDM_B Playback", "TDMOUT_B OUT",
+				"SPDIFOUT IN 0", "FRDDR_A OUT 3",
+				"SPDIFOUT IN 1", "FRDDR_B OUT 3",
+				"SPDIFOUT IN 2", "FRDDR_C OUT 3";
+
+		assigned-clocks = <&clkc CLKID_MPLL2>,
+				  <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+		status = "okay";
+
+		dai-link-0 {
+			sound-dai = <&frddr_a>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&frddr_b>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&frddr_c>;
+		};
+
+		/* 8ch hdmi interface */
+		dai-link-3 {
+			sound-dai = <&tdmif_b>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			dai-tdm-slot-tx-mask-1 = <1 1>;
+			dai-tdm-slot-tx-mask-2 = <1 1>;
+			dai-tdm-slot-tx-mask-3 = <1 1>;
+			mclk-fs = <256>;
+
+			codec {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+			};
+		};
+
+		/* spdif hdmi or toslink interface */
+		dai-link-4 {
+			sound-dai = <&spdifout>;
+
+			codec-0 {
+				sound-dai = <&spdif_dit>;
+			};
+
+			codec-1 {
+				sound-dai = <&tohdmitx TOHDMITX_SPDIF_IN_A>;
+			};
+		};
+
+		/* spdif hdmi interface */
+		dai-link-5 {
+			sound-dai = <&spdifout_b>;
+
+			codec {
+				sound-dai = <&tohdmitx TOHDMITX_SPDIF_IN_B>;
+			};
+		};
+
+		/* hdmi glue */
+		dai-link-6 {
+			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+			codec {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+};
+
+&arb {
+	status = "okay";
 };
 
 &cec_AO {
@@ -163,6 +256,10 @@
 	hdmi-phandle = <&hdmi_tx>;
 };
 
+&clkc_audio {
+	status = "okay";
+};
+
 &cpu0 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
@@ -203,6 +300,18 @@
 	phy-mode = "rmii";
 };
 
+&frddr_a {
+	status = "okay";
+};
+
+&frddr_b {
+	status = "okay";
+};
+
+&frddr_c {
+	status = "okay";
+};
+
 &hdmi_tx {
 	status = "okay";
 	pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
@@ -288,6 +397,28 @@
 	vqmmc-supply = <&flash_1v8>;
 };
 
+&spdifout {
+	pinctrl-0 = <&spdif_out_h_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&spdifout_b {
+	status = "okay";
+};
+
+&tdmif_b {
+	status = "okay";
+};
+
+&tdmout_b {
+	status = "okay";
+};
+
+&tohdmitx {
+	status = "okay";
+};
+
 &uart_AO {
 	status = "okay";
 	pinctrl-0 = <&uart_ao_a_pins>;
-- 
2.17.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [PATCH v2 3/3] arm64: dts: meson: add audio playback to u200
  2020-07-19  2:45 ` [PATCH v2 3/3] arm64: dts: meson: add audio playback to u200 Christian Hewitt
@ 2020-07-21  9:06   ` Jerome Brunet
  0 siblings, 0 replies; 5+ messages in thread
From: Jerome Brunet @ 2020-07-21  9:06 UTC (permalink / raw)
  To: Christian Hewitt, Rob Herring, Mark Rutland, Kevin Hilman,
	devicetree, linux-arm-kernel, linux-amlogic, linux-kernel


On Sun 19 Jul 2020 at 04:45, Christian Hewitt <christianshewitt@gmail.com> wrote:

> Add initial support limited to HDMI i2s and S/PDIF (LPCM).

Nack.

#1. Same comment as before on spdifout B and SPDIF HDMI input.
#2. the u200 is a special reference device with 2 onboards codecs,
    external connector for audio daugther boards and internal codec.
    I don't see another board using that configuration, which would make
    them incompatible
#3. TDM B is a bad choice on this board as it connected to one of the
    i2s codecs of the board, which won't take 4 lines ine.

>
> Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
> ---
>  .../boot/dts/amlogic/meson-g12a-u200.dts      | 131 ++++++++++++++++++
>  1 file changed, 131 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts
> index a26bfe72550f..dde7e258a184 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts
> @@ -8,6 +8,7 @@
>  #include "meson-g12a.dtsi"
>  #include <dt-bindings/gpio/gpio.h>
>  #include <dt-bindings/gpio/meson-g12a-gpio.h>
> +#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
>  
>  / {
>  	compatible = "amlogic,u200", "amlogic,g12a";
> @@ -18,6 +19,13 @@
>  		ethernet0 = &ethmac;
>  	};
>  
> +	spdif_dit: audio-codec-1 {
> +		#sound-dai-cells = <0>;
> +		compatible = "linux,spdif-dit";
> +		status = "okay";
> +		sound-name-prefix = "DIT";
> +	};
> +
>  	chosen {
>  		stdout-path = "serial0:115200n8";
>  	};
> @@ -147,6 +155,91 @@
>  		regulator-boot-on;
>  		regulator-always-on;
>  	};
> +
> +
> +	sound {
> +		compatible = "amlogic,axg-sound-card";
> +		model = "G12A-U200";
> +		audio-aux-devs = <&tdmout_b>;
> +		audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
> +				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
> +				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
> +				"TDM_B Playback", "TDMOUT_B OUT",
> +				"SPDIFOUT IN 0", "FRDDR_A OUT 3",
> +				"SPDIFOUT IN 1", "FRDDR_B OUT 3",
> +				"SPDIFOUT IN 2", "FRDDR_C OUT 3";
> +
> +		assigned-clocks = <&clkc CLKID_MPLL2>,
> +				  <&clkc CLKID_MPLL0>,
> +				  <&clkc CLKID_MPLL1>;
> +		assigned-clock-parents = <0>, <0>, <0>;
> +		assigned-clock-rates = <294912000>,
> +				       <270950400>,
> +				       <393216000>;
> +		status = "okay";
> +
> +		dai-link-0 {
> +			sound-dai = <&frddr_a>;
> +		};
> +
> +		dai-link-1 {
> +			sound-dai = <&frddr_b>;
> +		};
> +
> +		dai-link-2 {
> +			sound-dai = <&frddr_c>;
> +		};
> +
> +		/* 8ch hdmi interface */
> +		dai-link-3 {
> +			sound-dai = <&tdmif_b>;
> +			dai-format = "i2s";
> +			dai-tdm-slot-tx-mask-0 = <1 1>;
> +			dai-tdm-slot-tx-mask-1 = <1 1>;
> +			dai-tdm-slot-tx-mask-2 = <1 1>;
> +			dai-tdm-slot-tx-mask-3 = <1 1>;
> +			mclk-fs = <256>;
> +
> +			codec {
> +				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
> +			};
> +		};
> +
> +		/* spdif hdmi or toslink interface */
> +		dai-link-4 {
> +			sound-dai = <&spdifout>;
> +
> +			codec-0 {
> +				sound-dai = <&spdif_dit>;
> +			};
> +
> +			codec-1 {
> +				sound-dai = <&tohdmitx TOHDMITX_SPDIF_IN_A>;
> +			};
> +		};
> +
> +		/* spdif hdmi interface */
> +		dai-link-5 {
> +			sound-dai = <&spdifout_b>;
> +
> +			codec {
> +				sound-dai = <&tohdmitx TOHDMITX_SPDIF_IN_B>;
> +			};
> +		};
> +
> +		/* hdmi glue */
> +		dai-link-6 {
> +			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
> +
> +			codec {
> +				sound-dai = <&hdmi_tx>;
> +			};
> +		};
> +	};
> +};
> +
> +&arb {
> +	status = "okay";
>  };
>  
>  &cec_AO {
> @@ -163,6 +256,10 @@
>  	hdmi-phandle = <&hdmi_tx>;
>  };
>  
> +&clkc_audio {
> +	status = "okay";
> +};
> +
>  &cpu0 {
>  	cpu-supply = <&vddcpu>;
>  	operating-points-v2 = <&cpu_opp_table>;
> @@ -203,6 +300,18 @@
>  	phy-mode = "rmii";
>  };
>  
> +&frddr_a {
> +	status = "okay";
> +};
> +
> +&frddr_b {
> +	status = "okay";
> +};
> +
> +&frddr_c {
> +	status = "okay";
> +};
> +
>  &hdmi_tx {
>  	status = "okay";
>  	pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
> @@ -288,6 +397,28 @@
>  	vqmmc-supply = <&flash_1v8>;
>  };
>  
> +&spdifout {
> +	pinctrl-0 = <&spdif_out_h_pins>;
> +	pinctrl-names = "default";
> +	status = "okay";
> +};
> +
> +&spdifout_b {
> +	status = "okay";
> +};
> +
> +&tdmif_b {
> +	status = "okay";
> +};
> +
> +&tdmout_b {
> +	status = "okay";
> +};
> +
> +&tohdmitx {
> +	status = "okay";
> +};
> +
>  &uart_AO {
>  	status = "okay";
>  	pinctrl-0 = <&uart_ao_a_pins>;


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

^ permalink raw reply	[flat|nested] 5+ messages in thread

end of thread, back to index

Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-07-19  2:45 [PATCH v2 0/3] arm64: dts: meson: add more G12/SM1 soundcards Christian Hewitt
2020-07-19  2:45 ` [PATCH v2 1/3] arm64: dts: meson: add audio playback to odroid-c4 Christian Hewitt
2020-07-19  2:45 ` [PATCH v2 2/3] arm64: dts: meson: add audio playback to khadas-vim3l Christian Hewitt
2020-07-19  2:45 ` [PATCH v2 3/3] arm64: dts: meson: add audio playback to u200 Christian Hewitt
2020-07-21  9:06   ` Jerome Brunet

Linux-Amlogic Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-amlogic/0 linux-amlogic/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-amlogic linux-amlogic/ https://lore.kernel.org/linux-amlogic \
		linux-amlogic@lists.infradead.org
	public-inbox-index linux-amlogic

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-amlogic


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git