This series adds support for the MeCool (Videostrong) KII Pro (GXL) and KIII Pro (GXM) Android STB devices. These are quite popular due to the embedded multi-standard tuner card (which is sadly not-yet supported in the kernel). Both devices closely follow the Amlogic reference designs with keys/buttons/LED details taken from known- working vendor kernel device-trees. Testing was made by Drazen Spio via the LibreELEC forums [0] as I don't own either device. Since dts files were added to LibreELEC nightly test images I've seen the number of active installs grow without reported issues. [0] https://forum.libreelec.tv/thread/23590-nightbuild-on-mecool-kiii-pro/ Christian Hewitt (3): dt-bindings: arm: amlogic: add MeCool KII/KIII Pro bindings arm64: dts: meson: add initial device-tree for MeCool KII Pro arm64: dts: meson: add initial device-tree for MeCool KIII Pro .../devicetree/bindings/arm/amlogic.yaml | 2 + arch/arm64/boot/dts/amlogic/Makefile | 2 + .../meson-gxl-s905d-mecool-kii-pro.dts | 86 +++++++++++++ .../dts/amlogic/meson-gxm-mecool-kiii-pro.dts | 113 ++++++++++++++++++ 4 files changed, 203 insertions(+) create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-s905d-mecool-kii-pro.dts create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxm-mecool-kiii-pro.dts -- 2.17.1 _______________________________________________ linux-amlogic mailing list linux-amlogic@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-amlogic
Add the board bindings for the MeCool (Videostrong Technology Co., Ltd) KII-Pro (S905D) and KIII-Pro (S912) devices. Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> --- Documentation/devicetree/bindings/arm/amlogic.yaml | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Documentation/devicetree/bindings/arm/amlogic.yaml b/Documentation/devicetree/bindings/arm/amlogic.yaml index d24334e1e166..97fb96266344 100644 --- a/Documentation/devicetree/bindings/arm/amlogic.yaml +++ b/Documentation/devicetree/bindings/arm/amlogic.yaml @@ -109,6 +109,7 @@ properties: - libretech,aml-s905d-pc - phicomm,n1 - smartlabs,sml5442tw + - videostrong,gxl-kii-pro - const: amlogic,s905d - const: amlogic,meson-gxl @@ -123,6 +124,7 @@ properties: - minix,neo-u9h - nexbox,a1 - tronsmart,vega-s96 + - videostrong,gxm-kiii-pro - wetek,core2 - const: amlogic,s912 - const: amlogic,meson-gxm -- 2.17.1 _______________________________________________ linux-amlogic mailing list linux-amlogic@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-amlogic
MeCool (Videostrong) KII Pro is based on the Amlogic P230 reference board with an S905D chip and the following specs: - 2GB DDR3 RAM - 16GB eMMC - 10/100 Base-T Ethernet - BCM4335 Wireless (802.11 b/g/n/ac, BT 4.0) - DVB-C/T/T2/S/S2 (AVL6862TA demod + R848 tuner) - HDMI 2.0a video - S/PDIF optical output - CVBS/Analogue output - 4x USB 2.0 ports - IR receiver - 1x Power button (with integrated blue LED) - 1x micro SD card slot Tested-by: Drazen Spio <drazsp@gmail.com> Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> --- arch/arm64/boot/dts/amlogic/Makefile | 1 + .../meson-gxl-s905d-mecool-kii-pro.dts | 86 +++++++++++++++++++ 2 files changed, 87 insertions(+) create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-s905d-mecool-kii-pro.dts diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile index aebd49c88719..f8f515c93055 100644 --- a/arch/arm64/boot/dts/amlogic/Makefile +++ b/arch/arm64/boot/dts/amlogic/Makefile @@ -29,6 +29,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-libretech-cc.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-libretech-cc-v2.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-nexbox-a95x.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-p212.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-mecool-kii-pro.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p230.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p231.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-phicomm-n1.dtb diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-mecool-kii-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-mecool-kii-pro.dts new file mode 100644 index 000000000000..5ab5d3aa0646 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-mecool-kii-pro.dts @@ -0,0 +1,86 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/* + * Author: Christian Hewitt <christianshewitt@gmail.com> + */ + +/dts-v1/; + +#include "meson-gxl-s905d.dtsi" +#include "meson-gx-p23x-q20x.dtsi" +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> + +/ { + compatible = "videostrong,gxl-kii-pro", "amlogic,s905d", "amlogic,meson-gxl"; + model = "MeCool KII Pro"; + + adc-keys { + compatible = "adc-keys"; + io-channels = <&saradc 0>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1710000>; + + button-function { + label = "Update"; + linux,code = <KEY_VENDOR>; + press-threshold-microvolt = <10000>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <100>; + + button@0 { + label = "power"; + linux,code = <KEY_POWER>; + gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>; + }; + }; + + leds { + compatible = "gpio-leds"; + + blue { + color = <LED_COLOR_ID_BLUE>; + function = LED_FUNCTION_POWER; + gpios = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>; + default-state = "on"; + panic-indicator; + }; + }; +}; + +ðmac { + phy-mode = "rmii"; + phy-handle = <&internal_phy>; +}; + +&ir { + linux,rc-map-name = "rc-mecool-kii-pro"; +}; + +&sd_emmc_a { + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; +}; + +&uart_A { + status = "okay"; + pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; + pinctrl-names = "default"; + uart-has-rtscts; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; + max-speed = <2000000>; + clocks = <&wifi32k>; + clock-names = "lpo"; + }; +}; -- 2.17.1 _______________________________________________ linux-amlogic mailing list linux-amlogic@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-amlogic
MeCool (Videostrong) KIII Pro is based on the Amlogic Q200 reference board with an S912 chip and the following specs: - 3GB DDR3 RAM - 16GB eMMC - 10/100/1000 Base-T Ethernet - BCM4335 Wireless (802.11 b/g/n/ac, BT 4.0) - DVB-C/T/T2/S/S2 (AVL6862TA demod + R912 tuner) - HDMI 2.0a video - S/PDIF optical output - CVBS/Analogue output - 4x USB 2.0 ports - IR receiver - 1x Power button (with integrated blue LED) - 1x Update/Reset button (underside) - 1x micro SD card slot Tested-by: Drazen Spio <drazsp@gmail.com> Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> --- arch/arm64/boot/dts/amlogic/Makefile | 1 + .../dts/amlogic/meson-gxm-mecool-kiii-pro.dts | 113 ++++++++++++++++++ 2 files changed, 114 insertions(+) create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxm-mecool-kiii-pro.dts diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile index f8f515c93055..a58ccecfcb55 100644 --- a/arch/arm64/boot/dts/amlogic/Makefile +++ b/arch/arm64/boot/dts/amlogic/Makefile @@ -39,6 +39,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905w-p281.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905w-tx3-mini.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-libretech-pc.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-khadas-vim2.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-gxm-mecool-kiii-pro.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-minix-neo-u9h.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-nexbox-a1.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q200.dtb diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-mecool-kiii-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-mecool-kiii-pro.dts new file mode 100644 index 000000000000..0651756d7fb5 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-mecool-kiii-pro.dts @@ -0,0 +1,113 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/* + * Author: Christian Hewitt <christianshewitt@gmail.com> + */ + +/dts-v1/; + +#include "meson-gxm.dtsi" +#include "meson-gx-p23x-q20x.dtsi" +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> + +/ { + compatible = "videostrong,gxm-kiii-pro", "amlogic,s912", "amlogic,meson-gxm"; + model = "MeCool KIII Pro"; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0xC0000000>; + }; + + adc-keys { + compatible = "adc-keys"; + io-channels = <&saradc 0>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1710000>; + + button-function { + label = "Update"; + linux,code = <KEY_VENDOR>; + press-threshold-microvolt = <10000>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <100>; + + button@0 { + label = "power"; + linux,code = <KEY_POWER>; + gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>; + }; + }; + + leds { + compatible = "gpio-leds"; + + blue { + color = <LED_COLOR_ID_BLUE>; + function = LED_FUNCTION_POWER; + gpios = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>; + default-state = "on"; + panic-indicator; + }; + }; +}; + +ðmac { + pinctrl-0 = <ð_pins>; + pinctrl-names = "default"; + + phy-handle = <&external_phy>; + + amlogic,tx-delay-ns = <2>; + + phy-mode = "rgmii"; +}; + +&external_mdio { + external_phy: ethernet-phy@0 { + /* Realtek RTL8211F (0x001cc916) */ + reg = <0>; + max-speed = <1000>; + + reset-assert-us = <10000>; + reset-deassert-us = <80000>; + reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>; + + interrupt-parent = <&gpio_intc>; + /* MAC_INTR on GPIOZ_15 */ + interrupts = <25 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&ir { + linux,rc-map-name = "rc-mecool-kiii-pro"; +}; + +&sd_emmc_a { + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; +}; + +&uart_A { + status = "okay"; + pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; + pinctrl-names = "default"; + uart-has-rtscts; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; + max-speed = <2000000>; + clocks = <&wifi32k>; + clock-names = "lpo"; + }; +}; -- 2.17.1 _______________________________________________ linux-amlogic mailing list linux-amlogic@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-amlogic
On 29/03/2021 17:47, Christian Hewitt wrote: > MeCool (Videostrong) KII Pro is based on the Amlogic P230 reference > board with an S905D chip and the following specs: > > - 2GB DDR3 RAM > - 16GB eMMC > - 10/100 Base-T Ethernet > - BCM4335 Wireless (802.11 b/g/n/ac, BT 4.0) > - DVB-C/T/T2/S/S2 (AVL6862TA demod + R848 tuner) > - HDMI 2.0a video > - S/PDIF optical output > - CVBS/Analogue output > - 4x USB 2.0 ports > - IR receiver > - 1x Power button (with integrated blue LED) > - 1x micro SD card slot > > Tested-by: Drazen Spio <drazsp@gmail.com> > Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> > --- > arch/arm64/boot/dts/amlogic/Makefile | 1 + > .../meson-gxl-s905d-mecool-kii-pro.dts | 86 +++++++++++++++++++ > 2 files changed, 87 insertions(+) > create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-s905d-mecool-kii-pro.dts > > diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile > index aebd49c88719..f8f515c93055 100644 > --- a/arch/arm64/boot/dts/amlogic/Makefile > +++ b/arch/arm64/boot/dts/amlogic/Makefile > @@ -29,6 +29,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-libretech-cc.dtb > dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-libretech-cc-v2.dtb > dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-nexbox-a95x.dtb > dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-p212.dtb > +dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-mecool-kii-pro.dtb > dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p230.dtb > dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p231.dtb > dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-phicomm-n1.dtb > diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-mecool-kii-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-mecool-kii-pro.dts > new file mode 100644 > index 000000000000..5ab5d3aa0646 > --- /dev/null > +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-mecool-kii-pro.dts > @@ -0,0 +1,86 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > + > +/* > + * Author: Christian Hewitt <christianshewitt@gmail.com> > + */ > + > +/dts-v1/; > + > +#include "meson-gxl-s905d.dtsi" > +#include "meson-gx-p23x-q20x.dtsi" > +#include <dt-bindings/input/input.h> > +#include <dt-bindings/leds/common.h> > + > +/ { > + compatible = "videostrong,gxl-kii-pro", "amlogic,s905d", "amlogic,meson-gxl"; > + model = "MeCool KII Pro"; > + > + adc-keys { > + compatible = "adc-keys"; > + io-channels = <&saradc 0>; > + io-channel-names = "buttons"; > + keyup-threshold-microvolt = <1710000>; > + > + button-function { > + label = "Update"; > + linux,code = <KEY_VENDOR>; > + press-threshold-microvolt = <10000>; > + }; > + }; > + > + gpio-keys-polled { > + compatible = "gpio-keys-polled"; > + #address-cells = <1>; > + #size-cells = <0>; > + poll-interval = <100>; > + > + button@0 { > + label = "power"; > + linux,code = <KEY_POWER>; > + gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>; > + }; > + }; > + > + leds { > + compatible = "gpio-leds"; > + > + blue { > + color = <LED_COLOR_ID_BLUE>; > + function = LED_FUNCTION_POWER; > + gpios = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>; > + default-state = "on"; > + panic-indicator; > + }; > + }; > +}; > + > +ðmac { > + phy-mode = "rmii"; > + phy-handle = <&internal_phy>; > +}; > + > +&ir { > + linux,rc-map-name = "rc-mecool-kii-pro"; > +}; > + > +&sd_emmc_a { > + brcmf: wifi@1 { > + reg = <1>; > + compatible = "brcm,bcm4329-fmac"; > + }; > +}; > + > +&uart_A { > + status = "okay"; > + pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; > + pinctrl-names = "default"; > + uart-has-rtscts; > + > + bluetooth { > + compatible = "brcm,bcm43438-bt"; > + shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; > + max-speed = <2000000>; > + clocks = <&wifi32k>; > + clock-names = "lpo"; > + }; > +}; > Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> _______________________________________________ linux-amlogic mailing list linux-amlogic@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-amlogic
On 29/03/2021 17:47, Christian Hewitt wrote: > MeCool (Videostrong) KIII Pro is based on the Amlogic Q200 reference > board with an S912 chip and the following specs: > > - 3GB DDR3 RAM > - 16GB eMMC > - 10/100/1000 Base-T Ethernet > - BCM4335 Wireless (802.11 b/g/n/ac, BT 4.0) > - DVB-C/T/T2/S/S2 (AVL6862TA demod + R912 tuner) > - HDMI 2.0a video > - S/PDIF optical output > - CVBS/Analogue output > - 4x USB 2.0 ports > - IR receiver > - 1x Power button (with integrated blue LED) > - 1x Update/Reset button (underside) > - 1x micro SD card slot > > Tested-by: Drazen Spio <drazsp@gmail.com> > Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> > --- > arch/arm64/boot/dts/amlogic/Makefile | 1 + > .../dts/amlogic/meson-gxm-mecool-kiii-pro.dts | 113 ++++++++++++++++++ > 2 files changed, 114 insertions(+) > create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxm-mecool-kiii-pro.dts > > diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile > index f8f515c93055..a58ccecfcb55 100644 > --- a/arch/arm64/boot/dts/amlogic/Makefile > +++ b/arch/arm64/boot/dts/amlogic/Makefile > @@ -39,6 +39,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905w-p281.dtb > dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905w-tx3-mini.dtb > dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-libretech-pc.dtb > dtb-$(CONFIG_ARCH_MESON) += meson-gxm-khadas-vim2.dtb > +dtb-$(CONFIG_ARCH_MESON) += meson-gxm-mecool-kiii-pro.dtb > dtb-$(CONFIG_ARCH_MESON) += meson-gxm-minix-neo-u9h.dtb > dtb-$(CONFIG_ARCH_MESON) += meson-gxm-nexbox-a1.dtb > dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q200.dtb > diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-mecool-kiii-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-mecool-kiii-pro.dts > new file mode 100644 > index 000000000000..0651756d7fb5 > --- /dev/null > +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-mecool-kiii-pro.dts > @@ -0,0 +1,113 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > + > +/* > + * Author: Christian Hewitt <christianshewitt@gmail.com> > + */ > + > +/dts-v1/; > + > +#include "meson-gxm.dtsi" > +#include "meson-gx-p23x-q20x.dtsi" > +#include <dt-bindings/input/input.h> > +#include <dt-bindings/leds/common.h> > + > +/ { > + compatible = "videostrong,gxm-kiii-pro", "amlogic,s912", "amlogic,meson-gxm"; > + model = "MeCool KIII Pro"; > + > + memory@0 { > + device_type = "memory"; > + reg = <0x0 0x0 0x0 0xC0000000>; > + }; > + > + adc-keys { > + compatible = "adc-keys"; > + io-channels = <&saradc 0>; > + io-channel-names = "buttons"; > + keyup-threshold-microvolt = <1710000>; > + > + button-function { > + label = "Update"; > + linux,code = <KEY_VENDOR>; > + press-threshold-microvolt = <10000>; > + }; > + }; > + > + gpio-keys-polled { > + compatible = "gpio-keys-polled"; > + #address-cells = <1>; > + #size-cells = <0>; > + poll-interval = <100>; > + > + button@0 { > + label = "power"; > + linux,code = <KEY_POWER>; > + gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>; > + }; > + }; > + > + leds { > + compatible = "gpio-leds"; > + > + blue { > + color = <LED_COLOR_ID_BLUE>; > + function = LED_FUNCTION_POWER; > + gpios = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>; > + default-state = "on"; > + panic-indicator; > + }; > + }; > +}; > + > +ðmac { > + pinctrl-0 = <ð_pins>; > + pinctrl-names = "default"; > + > + phy-handle = <&external_phy>; > + > + amlogic,tx-delay-ns = <2>; > + > + phy-mode = "rgmii"; > +}; > + > +&external_mdio { > + external_phy: ethernet-phy@0 { > + /* Realtek RTL8211F (0x001cc916) */ > + reg = <0>; > + max-speed = <1000>; > + > + reset-assert-us = <10000>; > + reset-deassert-us = <80000>; > + reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>; > + > + interrupt-parent = <&gpio_intc>; > + /* MAC_INTR on GPIOZ_15 */ > + interrupts = <25 IRQ_TYPE_LEVEL_LOW>; > + }; > +}; > + > +&ir { > + linux,rc-map-name = "rc-mecool-kiii-pro"; > +}; > + > +&sd_emmc_a { > + brcmf: wifi@1 { > + reg = <1>; > + compatible = "brcm,bcm4329-fmac"; > + }; > +}; > + > +&uart_A { > + status = "okay"; > + pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; > + pinctrl-names = "default"; > + uart-has-rtscts; > + > + bluetooth { > + compatible = "brcm,bcm43438-bt"; > + shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; > + max-speed = <2000000>; > + clocks = <&wifi32k>; > + clock-names = "lpo"; > + }; > +}; > Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> _______________________________________________ linux-amlogic mailing list linux-amlogic@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-amlogic
On Mon, 29 Mar 2021 15:47:51 +0000, Christian Hewitt wrote: > Add the board bindings for the MeCool (Videostrong Technology Co., Ltd) > KII-Pro (S905D) and KIII-Pro (S912) devices. > > Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> > --- > Documentation/devicetree/bindings/arm/amlogic.yaml | 2 ++ > 1 file changed, 2 insertions(+) > Acked-by: Rob Herring <robh@kernel.org> _______________________________________________ linux-amlogic mailing list linux-amlogic@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-amlogic
Christian Hewitt <christianshewitt@gmail.com> writes: > This series adds support for the MeCool (Videostrong) KII Pro (GXL) > and KIII Pro (GXM) Android STB devices. These are quite popular due > to the embedded multi-standard tuner card (which is sadly not-yet > supported in the kernel). Both devices closely follow the Amlogic > reference designs with keys/buttons/LED details taken from known- > working vendor kernel device-trees. > > Testing was made by Drazen Spio via the LibreELEC forums [0] as I > don't own either device. Since dts files were added to LibreELEC > nightly test images I've seen the number of active installs grow > without reported issues. Great, thanks for the new board. Do you mind rebasing this on top of my v5.13/dt64 branch, since it has some conflicts with the Minix NEO U9-H series. Thanks, Kevin _______________________________________________ linux-amlogic mailing list linux-amlogic@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-amlogic
On Mon, 29 Mar 2021 15:47:50 +0000, Christian Hewitt wrote: > This series adds support for the MeCool (Videostrong) KII Pro (GXL) > and KIII Pro (GXM) Android STB devices. These are quite popular due > to the embedded multi-standard tuner card (which is sadly not-yet > supported in the kernel). Both devices closely follow the Amlogic > reference designs with keys/buttons/LED details taken from known- > working vendor kernel device-trees. > > [...] Applied, thanks! [1/3] dt-bindings: arm: amlogic: add MeCool KII/KIII Pro bindings commit: 0bbfea7c0469cbe0914c1800b70f607ed7638870 [2/3] arm64: dts: meson: add initial device-tree for MeCool KII Pro commit: d5454e7ce24a28bd22beb2fc02f1571b5748dfbb [3/3] arm64: dts: meson: add initial device-tree for MeCool KIII Pro commit: 727d93ed3ba67307a82c3ac5ebc7e335265e8b9e Best regards, -- Kevin Hilman <khilman@baylibre.com> _______________________________________________ linux-amlogic mailing list linux-amlogic@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-amlogic