From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-14.1 required=3.0 tests=BAYES_00,DKIMWL_WL_HIGH, DKIM_SIGNED,DKIM_VALID,HEADER_FROM_DIFFERENT_DOMAINS,INCLUDES_CR_TRAILER, INCLUDES_PATCH,MAILING_LIST_MULTI,SPF_HELO_NONE,SPF_PASS autolearn=ham autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id C3893C4320A for ; Thu, 2 Sep 2021 13:06:14 +0000 (UTC) Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id 82DE160EBA for ; Thu, 2 Sep 2021 13:06:14 +0000 (UTC) DMARC-Filter: OpenDMARC Filter v1.4.1 mail.kernel.org 82DE160EBA Authentication-Results: mail.kernel.org; dmarc=fail (p=reject dis=none) header.from=lexina.in Authentication-Results: mail.kernel.org; spf=none smtp.mailfrom=lists.infradead.org DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20210309; h=Sender: Content-Transfer-Encoding:Content-Type:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To: Message-Id:Date:Subject:Cc:To:From:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=SMAYWHg6vTKE9cQDtMAHhfft7HjI7kZtHYOlnjUljVk=; b=MC2mGf9JopdLFs 61sSrYHfnFV5m5FOUpLaOprQtzZoyd6lgGEoOnjDE1EcYe6R1Yh/SNx9TLuHayd83m+fGTmO29kag JOI0HqlEmrEDDg+XDlvzTgh+rIoszbvI1P0+A1dZ6XoQz7Bng7d0utazjc+CwvzQD52ZeRNvwU5eF dYKVeYQFgwd17ARu1c9OTY1NBF5/33oGbpmJCTAB7xahGSR9LT/L758Xn4L0ZTyGZj29DRLPaq9gv p3OhgnaGtuyVxeG15Efr/OPIN9Z71WpCc8bs8jcO7szqBqsd7FxNiLvcuSsk2eDXBE8wn2TaDO4yc KmHFcs3bv3O8gmOkt8qw==; Received: from localhost ([::1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.94.2 #2 (Red Hat Linux)) id 1mLmPx-009dyI-N3; Thu, 02 Sep 2021 13:06:09 +0000 Received: from mx.msync.work ([95.217.65.204]) by bombadil.infradead.org with esmtps (Exim 4.94.2 #2 (Red Hat Linux)) id 1mLmPY-009dqd-28; Thu, 02 Sep 2021 13:05:49 +0000 Received: from [127.0.0.1] (localhost [127.0.0.1]) by localhost (Mailerdaemon) with ESMTPSA id D3CC0D3645; Thu, 2 Sep 2021 13:05:41 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=lexina.in; s=dkim; t=1630587942; h=from:subject:date:message-id:to:cc:mime-version: content-transfer-encoding:in-reply-to:references; bh=RWAoVYwEp4IMd+8dPIbqauHhMLVqn1vvfdHSoCyC0tY=; b=xs7y4AIpBCfSskPAWnTCHelPnAGGgBx3/abslaDOzfw9AeuBWOZJcXjGorPK0Xb5eWvdyj DVxJZjhSmOG+uXFO+v9LHmfnTd7npWzGi1BAG2WiFP8VbUHuFZdpBrTPZBPbaYv6FB4uxk +QrbEPDF+VltuTStyHl9ut6Abq72pggHVciz0U/dPkvVmh7Dhhq4gSNKDZi1tCWOLCz3vy OrgtiB89h6t5F6WsJgSTdfWKlUFOuLtv2oVG3C9ZbTzZ/VHq+ZlzdR1wMEG7czIEmPE4JX Sw17DhK/77R8SBJmuqc9iyPmKG37ZBelD7PmxvBrYJS4PeyigUxxEhIRT37Vdg== From: Vyacheslav Bocharov To: Neil Armstrong , Kevin Hilman Cc: linux-amlogic@lists.infradead.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org Subject: [PATCH 2/3] arm64: dts: meson-axg: add support for JetHub D1 Date: Thu, 2 Sep 2021 16:05:15 +0300 Message-Id: <20210902130516.3892452-3-adeep@lexina.in> In-Reply-To: <20210902130516.3892452-1-adeep@lexina.in> References: <20210902130516.3892452-1-adeep@lexina.in> MIME-Version: 1.0 X-Last-TLS-Session-Version: TLSv1.3 X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20210902_060544_474735_FEBF36FB X-CRM114-Status: GOOD ( 16.15 ) X-BeenThere: linux-amlogic@lists.infradead.org X-Mailman-Version: 2.1.34 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "linux-amlogic" Errors-To: linux-amlogic-bounces+linux-amlogic=archiver.kernel.org@lists.infradead.org JetHome Jethub D1 (http://jethome.ru/jethub-d1) is a home automation controller with the following features: - DIN Rail Mounting - Amlogic A113X (ARM Cortex-A53) quad-core up to 1.5GHz - no video out - 512Mb/1GB LPDDR4 - 8/16GB eMMC flash - 1 x USB 2.0 - 1 x 10/100Mbps ethernet - WiFi / Bluetooth AMPAK AP6255 (Broadcom BCM43455) IEEE 802.11a/b/g/n/ac, Bluetooth 4.2. - TI CC2538 + CC2592 Zigbee Wireless Module with up to 20dBm output power and Zigbee 3.0 support. - 2 x gpio LEDS - GPIO user Button - 1 x 1-Wire - 2 x RS-485 - 4 x dry contact digital GPIO inputs - 3 x relay GPIO outputs - DC source with a voltage of 9 to 56 V / Passive POE Signed-off-by: Vyacheslav Bocharov --- arch/arm64/boot/dts/amlogic/Makefile | 1 + .../amlogic/meson-axg-jethome-jethub-j100.dts | 439 ++++++++++++++++++ 2 files changed, 440 insertions(+) create mode 100644 arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dts diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile index 2c3ce7c401a5..3ba6f58b9833 100644 --- a/arch/arm64/boot/dts/amlogic/Makefile +++ b/arch/arm64/boot/dts/amlogic/Makefile @@ -1,5 +1,6 @@ # SPDX-License-Identifier: GPL-2.0 dtb-$(CONFIG_ARCH_MESON) += meson-axg-s400.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-axg-jethome-jethub-j100.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12a-sei510.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12a-u200.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12a-x96-max.dtb diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dts b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dts new file mode 100644 index 000000000000..68d688528c86 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dts @@ -0,0 +1,439 @@ + +/dts-v1/; + +#include "meson-axg.dtsi" +#include +#include + +/ { + compatible = "jethome,j100", "amlogic,a113d", "amlogic,meson-axg"; + model = "JetHome JetHub J100"; + amlogic-dt-id = "axg_jethubj100_v1"; + + aliases { + serial0 = &uart_AO; /* Console */ + serial1 = &uart_B; /* Bluetooth */ + serial2 = &uart_AO_B; /* External UART (Wireless Module) */ + ethernet0 = ðmac; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + /* 1024MB RAM */ + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x40000000>; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + linux,cma { + compatible = "shared-dma-pool"; + reusable; size = <0x0 0x400000>; + alignment = <0x0 0x400000>; + linux,cma-default; + }; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; + }; + + vcc_3v3: regulator-vcc_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + }; + + vcc_5v: regulator-vcc_5v { + compatible = "regulator-fixed"; + regulator-name = "VCC5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + vddao_3v3: regulator-vddao_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_5v>; + regulator-always-on; + }; + + vddio_ao18: regulator-vddio_ao18 { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_AO18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + }; + + vddio_boot: regulator-vddio_boot { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_BOOT"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + }; + + usb_pwr: regulator-usb_pwr { + compatible = "regulator-fixed"; + regulator-name = "USB_PWR"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc_5v>; + regulator-always-on; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio GPIOX_7 GPIO_ACTIVE_LOW>; + clocks = <&wifi32k>; + clock-names = "ext_clock"; + }; + + wifi32k: wifi32k { + compatible = "pwm-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + pwms = <&pwm_ab 0 30518 0>; /* PWM_A at 32.768KHz */ + }; + + partitions: partitions { + parts = <1>; + part-0 = <&rootfs>; + rootfs: rootfs { + pname = "rootfs"; + size = <0xffffffff 0xffffffff>; + mask = <4>; + }; + }; + + efusekey: efusekey { + keynum = <5>; + key0 = <&key_0>; + key1 = <&key_1>; + key2 = <&key_2>; + key3 = <&key_3>; + key4 = <&key_4>; + + key_0: key_0 { + keyname = "mac"; + offset = <0>; + size = <6>; + }; + key_1: key_1 { + keyname = "mac_bt"; + offset = <6>; + size = <6>; + }; + key_2: key_2 { + keyname = "mac_wifi"; + offset = <12>; + size = <6>; + }; + key_3: key_3 { + keyname = "usid"; + offset = <18>; + size = <32>; + }; + key_4: key_4 { + keyname = "serial"; + offset = <50>; + size = <32>; + }; + }; //End efusekey + + unifykey { + compatible = "amlogic, unifykey"; + status = "ok"; + unifykey-num = <6>; + unifykey-index-0 = <&keysn_0>; + unifykey-index-1 = <&keysn_1>; + unifykey-index-2 = <&keysn_2>; + unifykey-index-3 = <&keysn_3>; + unifykey-index-4 = <&keysn_4>; + unifykey-index-5 = <&keysn_5>; + + keysn_0: key_0 { + key-name = "usid"; + key-device = "normal"; + key-permit = "read"; + }; + keysn_1: key_1 { + key-name = "mac"; + key-device = "normal"; + key-permit = "read"; + }; + keysn_2: key_2 { + key-name = "mac_bt"; + key-device = "normal"; + key-permit = "read","write","del"; + key-type = "mac"; + }; + keysn_3: key_3 { + key-name = "mac_wifi"; + key-device = "normal"; + key-permit = "read","write","del"; + key-type = "mac"; + }; + keysn_4: key_4 { + key-name = "serial"; + key-device = "normal"; + key-permit = "read"; + }; + keysn_5:key_5 { + key-name = "deviceid"; + key-device = "normal"; + key-permit = "read","write","del"; + }; + }; //End unifykey + + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&scpi_sensors 0>; + trips { + cpu_passive: cpu-passive { + temperature = <70000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + cpu_hot: cpu-hot { + temperature = <80000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "hot"; + }; + cpu_critical: cpu-critical { + temperature = <100000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "critical"; + }; + }; + }; + cpu_cooling_maps: cooling-maps { + map0 { + trip = <&cpu_passive>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu_hot>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; +}; + +ðmac { + status = "okay"; + pinctrl-0 = <ð_rmii_x_pins>; + pinctrl-names = "default"; + phy-handle = <ð_phy0>; + phy-mode = "rmii"; + internal_phy=<0>; + interrupts = ; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + /* ICPlus IP101A/G Ethernet PHY (vendor_id=0x0243, model_id=0x0c54) */ + eth_phy0: ethernet-phy@0 { + compatible = "ethernet-phy-id0243.0c54"; + max-speed = <100>; + reg = <0>; + + reset-assert-us = <10000>; + reset-deassert-us = <10000>; + reset-gpios = <&gpio GPIOZ_5 GPIO_ACTIVE_LOW>; + }; + }; +}; + +/* Internal I2C bus (on CPU module) */ +&i2c1 { + status = "okay"; + pinctrl-0 = <&i2c1_z_pins>; + pinctrl-names = "default"; + + /* RTC */ + pcf8563: pcf8563@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + status = "okay"; + }; +}; + +/* Peripheral I2C bus (on motherboard) */ +&i2c_AO { + status = "okay"; + pinctrl-0 = <&i2c_ao_sck_10_pins>, <&i2c_ao_sda_11_pins>; + pinctrl-names = "default"; +}; + +&pwm_ab { + status = "okay"; + pinctrl-0 = <&pwm_a_x20_pins>; + pinctrl-names = "default"; +}; + +/* wifi module */ +&sd_emmc_b { + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + pinctrl-0 = <&sdio_pins>; + pinctrl-1 = <&sdio_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <4>; + cap-sd-highspeed; + sd-uhs-sdr104; + max-frequency = <200000000>; + non-removable; + disable-wp; + + mmc-pwrseq = <&sdio_pwrseq>; + + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddio_boot>; + + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; +}; + +/* emmc storage */ +&sd_emmc_c { + status = "okay"; + pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <8>; + cap-mmc-highspeed; + max-frequency = <200000000>; + non-removable; + disable-wp; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + + mmc-pwrseq = <&emmc_pwrseq>; + + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vddio_boot>; +}; + +/* UART Bluetooth */ +&uart_B { + status = "okay"; + pinctrl-0 = <&uart_b_z_pins>, <&uart_b_z_cts_rts_pins>; + pinctrl-names = "default"; + uart-has-rtscts; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + shutdown-gpios = <&gpio GPIOZ_7 GPIO_ACTIVE_HIGH>; + }; +}; + +/* UART Console */ +&uart_AO { + status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; +}; + +/* UART Wireless module */ +&uart_AO_B { + status = "okay"; + pinctrl-0 = <&uart_ao_b_pins>; + pinctrl-names = "default"; +}; + +&usb { + status = "okay"; + phy-supply = <&usb_pwr>; +}; + +&spicc1 { + status = "okay"; +}; + +&audio { + status = "disabled"; +}; + +&efuse { + status = "okay"; + compatible = "amlogic,meson-gxbb-efuse", "amlogic, efuse"; + read_cmd = <0x82000030>; + write_cmd = <0x82000031>; + get_max_cmd = <0x82000033>; + key = <&efusekey>; + clock-names = "efuse_clk"; +}; + +&gpio { + interrupt-parent = <&gpio_intc>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-line-names = + "", "", "", "", "", // 0 - 4 + "", "", "", "", "", // 5 - 9 + "UserButton", "", "", "", "", // 10 - 14 + "", "", "", "", "", // 15 - 19 + "", "", "", "", "", // 20 - 24 + "", "LEDRED", "LEDGREEN", "Output3", "Output2", // 25 - 29 + "Output1", "", "", "", "", // 30 - 34 + "", "ZigBeeBOOT", "", "", "", // 35 - 39 + "", "ZigBeeRESET", "", "Input4", "Input3", // 40 - 44 + "Input2", "Input1", "", "", "", // 45 - 49 + "", "", "", "", "", // 50 - 54 + "", "", "", "", "", // 55 - 59 + "", "", "", "", "", // 60 - 64 + "", "", "", "", "", // 65 - 69 + "", "", "", "", "", // 70 - 74 + "", "", "", "", "", // 75 - 79 + "", "", "", "", "", // 80 - 84 + "", ""; // 85-86 +}; + +&cpu0 { + #cooling-cells = <2>; +}; + +&cpu1 { + #cooling-cells = <2>; +}; + +&cpu2 { + #cooling-cells = <2>; +}; + +&cpu3 { + #cooling-cells = <2>; +}; + -- 2.30.2 _______________________________________________ linux-amlogic mailing list linux-amlogic@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-amlogic