From: Jerome Brunet <jbrunet@baylibre.com>
To: Neil Armstrong <narmstrong@baylibre.com>, devicetree@vger.kernel.org
Cc: linux-amlogic@lists.infradead.org, linux-clk@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH 1/2] dt-bindings: clk: add G12A AO Clock and Reset Bindings
Date: Thu, 07 Feb 2019 16:10:12 +0100 [thread overview]
Message-ID: <2f03298e4d1ca0aa08d683d6db14bc194607b974.camel@baylibre.com> (raw)
In-Reply-To: <20190204091331.9298-2-narmstrong@baylibre.com>
On Mon, 2019-02-04 at 10:13 +0100, Neil Armstrong wrote:
> Add bindings for the Amlogic G12A AO Clock and Reset controllers.
>
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> ---
> .../bindings/clock/amlogic,gxbb-aoclkc.txt | 1 +
> include/dt-bindings/clock/g12a-aoclkc.h | 43 +++++++++++++++++++
> include/dt-bindings/reset/g12a-aoclkc.h | 18 ++++++++
> 3 files changed, 62 insertions(+)
> create mode 100644 include/dt-bindings/clock/g12a-aoclkc.h
> create mode 100644 include/dt-bindings/reset/g12a-aoclkc.h
>
> diff --git a/Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.txt
> b/Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.txt
> index 79511d7bb321..c41f0be5d438 100644
> --- a/Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.txt
> +++ b/Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.txt
> @@ -10,6 +10,7 @@ Required Properties:
> - GXL (S905X, S905D) : "amlogic,meson-gxl-aoclkc"
> - GXM (S912) : "amlogic,meson-gxm-aoclkc"
> - AXG (A113D, A113X) : "amlogic,meson-axg-aoclkc"
> + - G12A (S905X2, S905D2, S905Y2) : "amlogic,meson-g12a-aoclkc"
> followed by the common "amlogic,meson-gx-aoclkc"
> - clocks: list of clock phandle, one for each entry clock-names.
> - clock-names: should contain the following:
> diff --git a/include/dt-bindings/clock/g12a-aoclkc.h b/include/dt-
> bindings/clock/g12a-aoclkc.h
> new file mode 100644
> index 000000000000..997aca16c94f
> --- /dev/null
> +++ b/include/dt-bindings/clock/g12a-aoclkc.h
> @@ -0,0 +1,43 @@
> +/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */
> +/*
> + * Copyright (c) 2016 BayLibre, SAS
> + * Author: Neil Armstrong <narmstrong@baylibre.com>
> + *
> + * Copyright (c) 2018 Amlogic, inc.
> + * Author: Qiufang Dai <qiufang.dai@amlogic.com>
> + */
> +
> +#ifndef DT_BINDINGS_CLOCK_AMLOGIC_MESON_G12A_AOCLK
> +#define DT_BINDINGS_CLOCK_AMLOGIC_MESON_G12A_AOCLK
> +
> +#define CLKID_AO_AHB 0
> +#define CLKID_AO_IR_IN 1
> +#define CLKID_AO_I2C_M0 2
> +#define CLKID_AO_I2C_S0 3
> +#define CLKID_AO_UART 4
> +#define CLKID_AO_PROD_I2C 5
> +#define CLKID_AO_UART2 6
> +#define CLKID_AO_IR_OUT 7
> +#define CLKID_AO_SAR_ADC 8
> +#define CLKID_AO_MAILBOX 9
> +#define CLKID_AO_M3 10
> +#define CLKID_AO_AHB_SRAM 11
> +#define CLKID_AO_RTI 12
> +#define CLKID_AO_M4_FCLK 13
> +#define CLKID_AO_M4_HCLK 14
> +#define CLKID_AO_CLK81 15
> +#define CLKID_AO_SAR_ADC_SEL 16
> +#define CLKID_AO_SAR_ADC_DIV 17
Do we need to export the internal part of these composite clock ?
I know the other AO controller do it but it would be nice to avoid it, like
for the EE controllers ... unless there is good reason of course.
Same for the others below.
> +#define CLKID_AO_SAR_ADC_CLK 18
> +#define CLKID_AO_CTS_OSCIN 19
> +#define CLKID_AO_32K_PRE 20
> +#define CLKID_AO_32K_DIV 21
> +#define CLKID_AO_32K_SEL 22
> +#define CLKID_AO_32K 23
> +#define CLKID_AO_CEC_PRE 24
> +#define CLKID_AO_CEC_DIV 25
> +#define CLKID_AO_CEC_SEL 26
> +#define CLKID_AO_CEC 27
> +#define CLKID_AO_CTS_RTC_OSCIN 28
> +
> +#endif
> diff --git a/include/dt-bindings/reset/g12a-aoclkc.h b/include/dt-
> bindings/reset/g12a-aoclkc.h
> new file mode 100644
> index 000000000000..bd2e2337135c
> --- /dev/null
> +++ b/include/dt-bindings/reset/g12a-aoclkc.h
> @@ -0,0 +1,18 @@
> +/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */
> +/*
> + * Copyright (c) 2016 BayLibre, SAS
> + * Author: Neil Armstrong <narmstrong@baylibre.com>
> + */
> +
> +#ifndef DT_BINDINGS_RESET_AMLOGIC_MESON_G12A_AOCLK
> +#define DT_BINDINGS_RESET_AMLOGIC_MESON_G12A_AOCLK
> +
> +#define RESET_AO_IR_IN 0
> +#define RESET_AO_UART 1
> +#define RESET_AO_I2C_M 2
> +#define RESET_AO_I2C_S 3
> +#define RESET_AO_SAR_ADC 4
> +#define RESET_AO_UART2 5
> +#define RESET_AO_IR_OUT 6
> +
> +#endif
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
next prev parent reply other threads:[~2019-02-07 15:10 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-04 9:13 [PATCH 0/2] clk: meson: Add G12A AO Clock + Reset Controller Neil Armstrong
2019-02-04 9:13 ` [PATCH 1/2] dt-bindings: clk: add G12A AO Clock and Reset Bindings Neil Armstrong
2019-02-07 15:10 ` Jerome Brunet [this message]
2019-02-07 20:10 ` Neil Armstrong
2019-02-04 9:13 ` [PATCH 2/2] clk: meson: Add G12A AO Clock + Reset Controller Neil Armstrong
2019-02-05 22:18 ` Stephen Boyd
2019-02-06 19:41 ` Neil Armstrong
2019-02-07 15:11 ` [PATCH 0/2] " Jerome Brunet
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2f03298e4d1ca0aa08d683d6db14bc194607b974.camel@baylibre.com \
--to=jbrunet@baylibre.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=narmstrong@baylibre.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).