linux-amlogic.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: "Jernej Škrabec" <jernej.skrabec@siol.net>
To: Neil Armstrong <narmstrong@baylibre.com>
Cc: heiko@sntech.de, jonas@kwiboo.se, maxime.ripard@bootlin.com,
	hjc@rock-chips.com, dri-devel@lists.freedesktop.org,
	linux-kernel@vger.kernel.org, hverkuil@xs4all.nl,
	a.hajda@samsung.com, Laurent.pinchart@ideasonboard.com,
	linux-amlogic@lists.infradead.org
Subject: Re: [PATCH 3/5] drm/bridge: dw-hdmi: Add support for dynamic output format setup
Date: Mon, 27 May 2019 17:30:08 +0200	[thread overview]
Message-ID: <6496480.LkDOl06ZB3@jernej-laptop> (raw)
In-Reply-To: <20190520133753.23871-4-narmstrong@baylibre.com>

Hi!

Dne ponedeljek, 20. maj 2019 ob 15:37:51 CEST je Neil Armstrong napisal(a):
> In order to support the HDMI2.0 YUV420, YUV422 and the 10bit, 12bit and
> 16bits outpu use cases, add support for the recently introduced bridge
> callback format_set().
> 
> This callback will setup the new input format and encoding from encoder,
> then these information will be used instead of the default ones
> in the dw_hdmi_setup() function.
> 
> To determine the output bus format, has been added :
> - support for the connector display_info bus_formats, where a fixed
>   output bus format can be enforced by the encoder
> - support for synami output bus format depending on the input format,
>   especially the YUV420 input bus format, enforcing YUV420 as output
>   with the correct bit depth
> 
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> ---
>  drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 121 ++++++++++++++++++++--
>  1 file changed, 112 insertions(+), 9 deletions(-)
> 
> diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c index
> b50c49caf7ae..284ce59be8f8 100644
> --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> @@ -103,6 +103,8 @@ struct hdmi_vmode {
>  };
> 
>  struct hdmi_data_info {
> +	unsigned int bridge_in_bus_format;
> +	unsigned int bridge_in_encoding;
>  	unsigned int enc_in_bus_format;
>  	unsigned int enc_out_bus_format;
>  	unsigned int enc_in_encoding;
> @@ -1838,8 +1840,51 @@ static void hdmi_disable_overflow_interrupts(struct
> dw_hdmi *hdmi) HDMI_IH_MUTE_FC_STAT2);
>  }
> 
> +/*
> + * The DW-HDMI CSC can only interpolate and decimate from 4:2:2 to
> 4:4:4/RGB + * and from 4:4:4/RGB to 4:2:2.
> + * Default to RGB output except if 4:2:0 as input, which CSC cannot
> convert. + */
> +static unsigned long dw_hdmi_determine_output_bus_format(struct dw_hdmi
> *hdmi) +{
> +	unsigned int depth = hdmi_bus_fmt_color_depth(
> +					hdmi-
>hdmi_data.enc_in_bus_format);
> +	bool is_420 = hdmi_bus_fmt_is_yuv420(hdmi-
>hdmi_data.enc_in_bus_format);
> +	unsigned long fmt = MEDIA_BUS_FMT_RGB888_1X24;
> +
> +	switch (depth) {
> +	case 8:
> +		if (is_420)
> +			fmt = MEDIA_BUS_FMT_UYYVYY8_0_5X24;
> +		else
> +			fmt = MEDIA_BUS_FMT_RGB888_1X24;
> +		break;
> +	case 10:
> +		if (is_420)
> +			fmt = MEDIA_BUS_FMT_UYYVYY10_0_5X30;
> +		else
> +			fmt = MEDIA_BUS_FMT_RGB101010_1X30;
> +		break;
> +	case 12:
> +		if (is_420)
> +			fmt = MEDIA_BUS_FMT_UYYVYY12_0_5X36;
> +		else
> +			fmt = MEDIA_BUS_FMT_RGB121212_1X36;
> +		break;
> +	case 16:
> +		if (is_420)
> +			fmt = MEDIA_BUS_FMT_UYYVYY16_0_5X48;
> +		else
> +			fmt = MEDIA_BUS_FMT_RGB161616_1X48;
> +		break;
> +	}
> +
> +	return fmt;
> +}
> +
>  static int dw_hdmi_setup(struct dw_hdmi *hdmi, struct drm_display_mode
> *mode) {
> +	struct drm_display_info *display = &hdmi->connector.display_info;
>  	int ret;
> 
>  	hdmi_disable_overflow_interrupts(hdmi);
> @@ -1853,9 +1898,9 @@ static int dw_hdmi_setup(struct dw_hdmi *hdmi, struct
> drm_display_mode *mode) }
> 
>  	if ((hdmi->vic == 6) || (hdmi->vic == 7) ||
> -	    (hdmi->vic == 21) || (hdmi->vic == 22) ||
> -	    (hdmi->vic == 2) || (hdmi->vic == 3) ||
> -	    (hdmi->vic == 17) || (hdmi->vic == 18))
> +		 (hdmi->vic == 21) || (hdmi->vic == 22) ||
> +		 (hdmi->vic == 2) || (hdmi->vic == 3) ||
> +		 (hdmi->vic == 17) || (hdmi->vic == 18))
>  		hdmi->hdmi_data.enc_out_encoding = V4L2_YCBCR_ENC_601;
>  	else
>  		hdmi->hdmi_data.enc_out_encoding = V4L2_YCBCR_ENC_709;
> @@ -1863,22 +1908,29 @@ static int dw_hdmi_setup(struct dw_hdmi *hdmi,
> struct drm_display_mode *mode)
> hdmi->hdmi_data.video_mode.mpixelrepetitionoutput = 0;
>  	hdmi->hdmi_data.video_mode.mpixelrepetitioninput = 0;
> 
> -	/* TOFIX: Get input format from plat data or fallback to RGB888 */
> -	if (hdmi->plat_data->input_bus_format)
> +	if (hdmi->hdmi_data.bridge_in_bus_format)
> +		hdmi->hdmi_data.enc_in_bus_format =
> +			hdmi->hdmi_data.bridge_in_bus_format;
> +	else if (hdmi->plat_data->input_bus_format)
>  		hdmi->hdmi_data.enc_in_bus_format =
>  			hdmi->plat_data->input_bus_format;
>  	else
>  		hdmi->hdmi_data.enc_in_bus_format = 
MEDIA_BUS_FMT_RGB888_1X24;
> 
> -	/* TOFIX: Get input encoding from plat data or fallback to none */
> -	if (hdmi->plat_data->input_bus_encoding)
> +	if (hdmi->hdmi_data.bridge_in_encoding)
> +		hdmi->hdmi_data.enc_in_encoding =
> +			hdmi->hdmi_data.bridge_in_encoding;
> +	else if (hdmi->plat_data->input_bus_encoding)
>  		hdmi->hdmi_data.enc_in_encoding =
>  			hdmi->plat_data->input_bus_encoding;
>  	else
>  		hdmi->hdmi_data.enc_in_encoding = 
V4L2_YCBCR_ENC_DEFAULT;
> 
> -	/* TOFIX: Default to RGB888 output format */
> -	hdmi->hdmi_data.enc_out_bus_format = MEDIA_BUS_FMT_RGB888_1X24;
> +	if (display->num_bus_formats)
> +		hdmi->hdmi_data.enc_out_bus_format = display-
>bus_formats[0];
> +	else
> +		hdmi->hdmi_data.enc_out_bus_format =
> +				
dw_hdmi_determine_output_bus_format(hdmi);
> 
>  	hdmi->hdmi_data.pix_repet_factor = 0;
>  	hdmi->hdmi_data.hdcp_enable = 0;
> @@ -2150,6 +2202,56 @@ dw_hdmi_bridge_mode_valid(struct drm_bridge *bridge,
>  	return mode_status;
>  }
> 
> +static bool dw_hdmi_drm_bridge_format_set(struct drm_bridge *bridge,
> +					 const u32 
input_bus_format,
> +					 const u32 
input_encoding)
> +{
> +	struct dw_hdmi *hdmi = bridge->driver_private;
> +
> +	/* Filter supported input bus formats */
> +	switch (input_bus_format) {
> +	case MEDIA_BUS_FMT_RGB888_1X24:
> +	case MEDIA_BUS_FMT_RGB101010_1X30:
> +	case MEDIA_BUS_FMT_RGB121212_1X36:
> +	case MEDIA_BUS_FMT_RGB161616_1X48:
> +	case MEDIA_BUS_FMT_YUV8_1X24:
> +	case MEDIA_BUS_FMT_YUV10_1X30:
> +	case MEDIA_BUS_FMT_YUV12_1X36:
> +	case MEDIA_BUS_FMT_YUV16_1X48:
> +	case MEDIA_BUS_FMT_UYVY8_1X16:
> +	case MEDIA_BUS_FMT_UYVY10_1X20:
> +	case MEDIA_BUS_FMT_UYVY12_1X24:
> +	case MEDIA_BUS_FMT_UYYVYY8_0_5X24:
> +	case MEDIA_BUS_FMT_UYYVYY10_0_5X30:
> +	case MEDIA_BUS_FMT_UYYVYY12_0_5X36:
> +	case MEDIA_BUS_FMT_UYYVYY16_0_5X48:
> +		break;
> +	default:
> +		dev_dbg(hdmi->dev, "Unsupported Input bus format %x\n",
> +			input_bus_format);
> +		return false;
> +	}
> +
> +	/* Filter supported input bus encoding */
> +	switch (input_encoding) {
> +	case V4L2_YCBCR_ENC_DEFAULT:
> +	case V4L2_YCBCR_ENC_601:
> +	case V4L2_YCBCR_ENC_709:
> +	case V4L2_YCBCR_ENC_XV601:
> +	case V4L2_YCBCR_ENC_XV709:
> +		break;
> +	default:
> +		dev_dbg(hdmi->dev, "Unsupported Input encoding %x\n",
> +			input_bus_format);
> +		return false;
> +	}
> +
> +	hdmi->hdmi_data.bridge_in_bus_format = input_bus_format;
> +	hdmi->hdmi_data.bridge_in_encoding = input_encoding;
> +
> +	return true;
> +}
> +
>  static void dw_hdmi_bridge_mode_set(struct drm_bridge *bridge,
>  				    const struct drm_display_mode 
*orig_mode,
>  				    const struct drm_display_mode 
*mode)
> @@ -2192,6 +2294,7 @@ static const struct drm_bridge_funcs
> dw_hdmi_bridge_funcs = { .disable = dw_hdmi_bridge_disable,
>  	.mode_set = dw_hdmi_bridge_mode_set,
>  	.mode_valid = dw_hdmi_bridge_mode_valid,
> +	.format_set = dw_hdmi_drm_bridge_format_set,
>  };
> 
>  static irqreturn_t dw_hdmi_i2c_irq(struct dw_hdmi *hdmi)

Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net>

Best regards,
Jernej




_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

  reply	other threads:[~2019-05-27 15:30 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-20 13:37 [PATCH 0/5] drm/meson: Add support for HDMI2.0 YUV420 4k60 Neil Armstrong
2019-05-20 13:37 ` [PATCH 1/5] drm/bridge: dw-hdmi: allow ycbcr420 modes for >= 0x200a Neil Armstrong
2019-05-22  6:07   ` Andrzej Hajda
2019-06-05 12:59     ` Neil Armstrong
2019-05-20 13:37 ` [PATCH 2/5] drm/bridge: add encoder support to specify bridge input format Neil Armstrong
2019-05-27 15:29   ` Jernej Škrabec
2019-06-07 13:38   ` Laurent Pinchart
2019-06-07 14:11     ` Neil Armstrong
2019-05-20 13:37 ` [PATCH 3/5] drm/bridge: dw-hdmi: Add support for dynamic output format setup Neil Armstrong
2019-05-27 15:30   ` Jernej Škrabec [this message]
2019-05-20 13:37 ` [PATCH 4/5] drm/meson: Add YUV420 output support Neil Armstrong
2019-06-06 17:11   ` Kevin Hilman
2019-05-20 13:37 ` [PATCH 5/5] drm/meson: Output in YUV444 if sink supports it Neil Armstrong
2019-06-06 17:16   ` Kevin Hilman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=6496480.LkDOl06ZB3@jernej-laptop \
    --to=jernej.skrabec@siol.net \
    --cc=Laurent.pinchart@ideasonboard.com \
    --cc=a.hajda@samsung.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=heiko@sntech.de \
    --cc=hjc@rock-chips.com \
    --cc=hverkuil@xs4all.nl \
    --cc=jonas@kwiboo.se \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=maxime.ripard@bootlin.com \
    --cc=narmstrong@baylibre.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).