Linux-Amlogic Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH 0/3] arm64: dts: meson: g12a: add drive strength and hwrng
@ 2019-05-20 13:48 Neil Armstrong
  2019-05-20 13:48 ` [PATCH 1/3] arm64: dts: meson: g12a: add drive-strength hdmi ddc pins Neil Armstrong
                   ` (2 more replies)
  0 siblings, 3 replies; 11+ messages in thread
From: Neil Armstrong @ 2019-05-20 13:48 UTC (permalink / raw)
  To: khilman; +Cc: linux-amlogic, linux-kernel, linux-arm-kernel, Neil Armstrong

This patchset adds :
- drive strength for the HDMI DDC and Ethernet pads
- HWRNG node

Dependencies: 
- None

Neil Armstrong (3):
  arm64: dts: meson: g12a: add drive-strength hdmi ddc pins
  arm64: dts: meson: g12a: add drive strength for eth pins
  arm64: dts: meson: g12a: Add hwrng node

 arch/arm64/boot/dts/amlogic/meson-g12a.dtsi | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

-- 
2.21.0


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

^ permalink raw reply	[flat|nested] 11+ messages in thread

end of thread, back to index

Thread overview: 11+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-05-20 13:48 [PATCH 0/3] arm64: dts: meson: g12a: add drive strength and hwrng Neil Armstrong
2019-05-20 13:48 ` [PATCH 1/3] arm64: dts: meson: g12a: add drive-strength hdmi ddc pins Neil Armstrong
2019-05-20 17:51   ` Martin Blumenstingl
2019-05-23 16:13     ` Kevin Hilman
2019-05-20 13:48 ` [PATCH 2/3] arm64: dts: meson: g12a: add drive strength for eth pins Neil Armstrong
2019-05-20 17:52   ` Martin Blumenstingl
2019-05-23 16:13     ` Kevin Hilman
2019-05-20 13:48 ` [PATCH 3/3] arm64: dts: meson: g12a: Add hwrng node Neil Armstrong
2019-05-20 17:45   ` Martin Blumenstingl
2019-05-21  8:31     ` Neil Armstrong
2019-05-23 16:13       ` Kevin Hilman

Linux-Amlogic Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-amlogic/0 linux-amlogic/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-amlogic linux-amlogic/ https://lore.kernel.org/linux-amlogic \
		linux-amlogic@lists.infradead.org linux-amlogic@archiver.kernel.org
	public-inbox-index linux-amlogic

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-amlogic


AGPL code for this site: git clone https://public-inbox.org/ public-inbox