Linux-Amlogic Archive on
 help / color / Atom feed
From: Kevin Hilman <>
To: Jerome Brunet <>
	Jerome Brunet <>
Subject: Re: [PATCH 0/3] arm64: dts: meson: g12a: add mmc B and C
Date: Tue, 14 May 2019 17:23:54 -0700
Message-ID: <> (raw)
In-Reply-To: <>

Jerome Brunet <> writes:

> This patchset adds the MMC controller B and C to the g12a SoC as well
> as the u200 and sei510 boards.
> MMC controller A has been left out on purpose. This controller is
> special on this SoC family and will be added later on.
> Notice the use of the pinconf DT property 'drive-strength-microamp'.
> Support for this property is not yet merged in meson pinctrl driver but
> the DT part as been acked by the DT maintainer [0] so it should be safe
> to use.
> [0]:

Queued for v5.3 with tags from Neil and Martin,


linux-amlogic mailing list

      parent reply index

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-14  9:16 Jerome Brunet
2019-05-14  9:16 ` [PATCH 1/3] arm64: dts: meson: g12a: add mmc nodes Jerome Brunet
2019-05-14 18:29   ` Martin Blumenstingl
2019-05-14  9:16 ` [PATCH 2/3] arm64: dts: meson: u200: add sd and emmc Jerome Brunet
2019-05-14 18:24   ` Martin Blumenstingl
2019-05-14  9:16 ` [PATCH 3/3] arm64: dts: meson: sei510: " Jerome Brunet
2019-05-14 18:24   ` Martin Blumenstingl
2019-05-14 10:21 ` [PATCH 0/3] arm64: dts: meson: g12a: add mmc B and C Neil Armstrong
2019-05-15  0:23 ` Kevin Hilman [this message]

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \ \ \ \ \ \ \

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-Amlogic Archive on

Archives are clonable:
	git clone --mirror linux-amlogic/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-amlogic linux-amlogic/ \
	public-inbox-index linux-amlogic

Example config snippet for mirrors

Newsgroup available over NNTP:

AGPL code for this site: git clone public-inbox