From: Julien Masson <jmasson@baylibre.com>
To: Neil Armstrong <narmstrong@baylibre.com>
Cc: Julien Masson <jmasson@baylibre.com>,
linux-amlogic@lists.infradead.org,
dri-devel@lists.freedesktop.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH 5/9] drm: meson: viu: use proper macros instead of magic constants
Date: Mon, 24 Jun 2019 16:48:43 +0200 [thread overview]
Message-ID: <86sgrz82em.fsf@baylibre.com> (raw)
In-Reply-To: 86zhm782g5.fsf@baylibre.com
This patch add new macros which are used to set the following
registers:
- VIU_SW_RESET
- VIU_OSD1_CTRL_STAT
- VIU_OSD2_CTRL_STAT
- VIU_OSD1_FIFO_CTRL_STAT
- VIU_OSD2_FIFO_CTRL_STAT
- VIU_MISC_CTRL0
- VIU_OSD_BLEND_CTRL
- OSD1_BLEND_SRC_CTRL
- OSD2_BLEND_SRC_CTRL
- DOLBY_PATH_CTRL
Signed-off-by: Julien Masson <jmasson@baylibre.com>
---
drivers/gpu/drm/meson/meson_plane.c | 2 +-
drivers/gpu/drm/meson/meson_registers.h | 27 ++++++++
drivers/gpu/drm/meson/meson_viu.c | 82 +++++++++++++------------
3 files changed, 72 insertions(+), 39 deletions(-)
diff --git a/drivers/gpu/drm/meson/meson_plane.c b/drivers/gpu/drm/meson/meson_plane.c
index d90427b93a51..f2b2be1e8088 100644
--- a/drivers/gpu/drm/meson/meson_plane.c
+++ b/drivers/gpu/drm/meson/meson_plane.c
@@ -318,7 +318,7 @@ static void meson_plane_atomic_disable(struct drm_plane *plane,
/* Disable OSD1 */
if (meson_vpu_is_compatible(priv, "amlogic,meson-g12a-vpu"))
- writel_bits_relaxed(3 << 8, 0,
+ writel_bits_relaxed(VIU_OSD1_POSTBLD_SRC_OSD1, 0,
priv->io_base + _REG(OSD1_BLEND_SRC_CTRL));
else
writel_bits_relaxed(VPP_OSD1_POSTBLEND, 0,
diff --git a/drivers/gpu/drm/meson/meson_registers.h b/drivers/gpu/drm/meson/meson_registers.h
index 172f0794e0cd..7a52aac7e28a 100644
--- a/drivers/gpu/drm/meson/meson_registers.h
+++ b/drivers/gpu/drm/meson/meson_registers.h
@@ -146,11 +146,19 @@
#define VIU_ADDR_START 0x1a00
#define VIU_ADDR_END 0x1aff
#define VIU_SW_RESET 0x1a01
+#define VIU_SW_RESET_OSD1 BIT(0)
#define VIU_MISC_CTRL0 0x1a06
+#define VIU_CTRL0_VD1_AFBC_MASK 0x170000
#define VIU_MISC_CTRL1 0x1a07
#define D2D3_INTF_LENGTH 0x1a08
#define D2D3_INTF_CTRL0 0x1a09
#define VIU_OSD1_CTRL_STAT 0x1a10
+#define VIU_OSD1_OSD_BLK_ENABLE BIT(0)
+#define VIU_OSD1_POSTBLD_SRC_VD1 (1 << 8)
+#define VIU_OSD1_POSTBLD_SRC_VD2 (2 << 8)
+#define VIU_OSD1_POSTBLD_SRC_OSD1 (3 << 8)
+#define VIU_OSD1_POSTBLD_SRC_OSD2 (4 << 8)
+#define VIU_OSD1_OSD_ENABLE BIT(21)
#define VIU_OSD1_CTRL_STAT2 0x1a2d
#define VIU_OSD1_COLOR_ADDR 0x1a11
#define VIU_OSD1_COLOR 0x1a12
@@ -240,6 +248,12 @@
#define VIU_OSD3_MALI_UNPACK_CTRL 0x3d9f
#define VIU_OSD3_DIMM_CTRL 0x3da0
+#define VIU_OSD_DDR_PRIORITY_URGENT BIT(0)
+#define VIU_OSD_HOLD_FIFO_LINES(lines) ((lines & 0x1f) << 5)
+#define VIU_OSD_FIFO_DEPTH_VAL(val) ((val & 0x7f) << 12)
+#define VIU_OSD_WORDS_PER_BURST(words) (((words & 0x4) >> 1) << 22)
+#define VIU_OSD_FIFO_LIMITS(size) ((size & 0xf) << 24)
+
#define VD1_IF0_GEN_REG 0x1a50
#define VD1_IF0_CANVAS0 0x1a51
#define VD1_IF0_CANVAS1 0x1a52
@@ -1620,10 +1634,18 @@
#define VPU_MAFBC_PREFETCH_CFG_S3 0x3a7c
#define DOLBY_PATH_CTRL 0x1a0c
+#define DOLBY_BYPASS_EN(val) (val & 0xf)
#define OSD_PATH_MISC_CTRL 0x1a0e
#define MALI_AFBCD_TOP_CTRL 0x1a0f
#define VIU_OSD_BLEND_CTRL 0x39b0
+#define VIU_OSD_BLEND_REORDER(dest, src) ((src) << (dest * 4))
+#define VIU_OSD_BLEND_DIN_EN(bits) ((bits & 0xf) << 20)
+#define VIU_OSD_BLEND1_DIN3_BYPASS_TO_DOUT1 BIT(24)
+#define VIU_OSD_BLEND1_DOUT_BYPASS_TO_BLEND2 BIT(25)
+#define VIU_OSD_BLEND_DIN0_BYPASS_TO_DOUT0 BIT(26)
+#define VIU_OSD_BLEND_BLEN2_PREMULT_EN(input) ((input & 0x3) << 27)
+#define VIU_OSD_BLEND_HOLD_LINES(lines) ((lines & 0x7) << 29)
#define VIU_OSD_BLEND_CTRL1 0x39c0
#define VIU_OSD_BLEND_DIN0_SCOPE_H 0x39b1
#define VIU_OSD_BLEND_DIN0_SCOPE_V 0x39b2
@@ -1665,6 +1687,11 @@
#define VD_BLEND_POSTBLD_PREMULT_EN BIT(16)
#define OSD1_BLEND_SRC_CTRL 0x1dfd
#define OSD2_BLEND_SRC_CTRL 0x1dfe
+#define OSD_BLEND_POSTBLD_SRC_VD1 (1 << 8)
+#define OSD_BLEND_POSTBLD_SRC_VD2 (2 << 8)
+#define OSD_BLEND_POSTBLD_SRC_OSD1 (3 << 8)
+#define OSD_BLEND_POSTBLD_SRC_OSD2 (4 << 8)
+#define OSD_BLEND_PATH_SEL_ENABLE BIT(20)
#define VPP_POST_BLEND_BLEND_DUMMY_DATA 0x3968
#define VPP_POST_BLEND_DUMMY_ALPHA 0x3969
diff --git a/drivers/gpu/drm/meson/meson_viu.c b/drivers/gpu/drm/meson/meson_viu.c
index 4b2b3024d371..8b7fde2de489 100644
--- a/drivers/gpu/drm/meson/meson_viu.c
+++ b/drivers/gpu/drm/meson/meson_viu.c
@@ -323,9 +323,9 @@ void meson_viu_osd1_reset(struct meson_drm *priv)
priv->io_base + _REG(VIU_OSD1_CTRL_STAT2));
/* Reset OSD1 */
- writel_bits_relaxed(BIT(0), BIT(0),
+ writel_bits_relaxed(VIU_SW_RESET_OSD1, VIU_SW_RESET_OSD1,
priv->io_base + _REG(VIU_SW_RESET));
- writel_bits_relaxed(BIT(0), 0,
+ writel_bits_relaxed(VIU_SW_RESET_OSD1, 0,
priv->io_base + _REG(VIU_SW_RESET));
/* Rewrite these registers state lost in the reset */
@@ -338,15 +338,22 @@ void meson_viu_osd1_reset(struct meson_drm *priv)
meson_viu_load_matrix(priv);
}
+static inline uint32_t meson_viu_osd_burst_length_reg(uint32_t length)
+{
+ uint32_t val = (((length & 0x80) % 24) / 12);
+
+ return (((val & 0x3) << 10) | (((val & 0x4) >> 2) << 31));
+}
+
void meson_viu_init(struct meson_drm *priv)
{
uint32_t reg;
/* Disable OSDs */
- writel_bits_relaxed(BIT(0) | BIT(21), 0,
- priv->io_base + _REG(VIU_OSD1_CTRL_STAT));
- writel_bits_relaxed(BIT(0) | BIT(21), 0,
- priv->io_base + _REG(VIU_OSD2_CTRL_STAT));
+ writel_bits_relaxed(VIU_OSD1_OSD_BLK_ENABLE | VIU_OSD1_OSD_ENABLE, 0,
+ priv->io_base + _REG(VIU_OSD1_CTRL_STAT));
+ writel_bits_relaxed(VIU_OSD1_OSD_BLK_ENABLE | VIU_OSD1_OSD_ENABLE, 0,
+ priv->io_base + _REG(VIU_OSD2_CTRL_STAT));
/* On GXL/GXM, Use the 10bit HDR conversion matrix */
if (meson_vpu_is_compatible(priv, "amlogic,meson-gxm-vpu") ||
@@ -357,19 +364,17 @@ void meson_viu_init(struct meson_drm *priv)
true);
/* Initialize OSD1 fifo control register */
- reg = BIT(0) | /* Urgent DDR request priority */
- (4 << 5); /* hold_fifo_lines */
+ reg = VIU_OSD_DDR_PRIORITY_URGENT |
+ VIU_OSD_HOLD_FIFO_LINES(4) |
+ VIU_OSD_FIFO_DEPTH_VAL(32) | /* fifo_depth_val: 32*8=256 */
+ VIU_OSD_WORDS_PER_BURST(4) | /* 4 words in 1 burst */
+ VIU_OSD_FIFO_LIMITS(2); /* fifo_lim: 2*16=32 */
+
if (meson_vpu_is_compatible(priv, "amlogic,meson-g12a-vpu"))
- reg |= (1 << 10) | /* burst length 32 */
- (32 << 12) | /* fifo_depth_val: 32*8=256 */
- (2 << 22) | /* 4 words in 1 burst */
- (2 << 24) |
- (1 << 31);
+ reg |= meson_viu_osd_burst_length_reg(32);
else
- reg |= (3 << 10) | /* burst length 64 */
- (32 << 12) | /* fifo_depth_val: 32*8=256 */
- (2 << 22) | /* 4 words in 1 burst */
- (2 << 24);
+ reg |= meson_viu_osd_burst_length_reg(64);
+
writel_relaxed(reg, priv->io_base + _REG(VIU_OSD1_FIFO_CTRL_STAT));
writel_relaxed(reg, priv->io_base + _REG(VIU_OSD2_FIFO_CTRL_STAT));
@@ -382,12 +387,9 @@ void meson_viu_init(struct meson_drm *priv)
priv->io_base + _REG(VIU_OSD2_CTRL_STAT2));
/* Disable VD1 AFBC */
- /* di_mif0_en=0 mif0_to_vpp_en=0 di_mad_en=0 */
- writel_bits_relaxed(0x7 << 16, 0,
- priv->io_base + _REG(VIU_MISC_CTRL0));
- /* afbc vd1 set=0 */
- writel_bits_relaxed(BIT(20), 0,
- priv->io_base + _REG(VIU_MISC_CTRL0));
+ /* di_mif0_en=0 mif0_to_vpp_en=0 di_mad_en=0 and afbc vd1 set=0*/
+ writel_bits_relaxed(VIU_CTRL0_VD1_AFBC_MASK, 0,
+ priv->io_base + _REG(VIU_MISC_CTRL0));
writel_relaxed(0, priv->io_base + _REG(AFBC_ENABLE));
writel_relaxed(0x00FF00C0,
@@ -396,27 +398,31 @@ void meson_viu_init(struct meson_drm *priv)
priv->io_base + _REG(VD2_IF0_LUMA_FIFO_SIZE));
if (meson_vpu_is_compatible(priv, "amlogic,meson-g12a-vpu")) {
- writel_relaxed(4 << 29 |
- 1 << 27 |
- 1 << 26 | /* blend_din0 input to blend0 */
- 1 << 25 | /* blend1_dout to blend2 */
- 1 << 24 | /* blend1_din3 input to blend1 */
- 1 << 20 |
- 0 << 16 |
- 1,
- priv->io_base + _REG(VIU_OSD_BLEND_CTRL));
- writel_relaxed(1 << 20,
- priv->io_base + _REG(OSD1_BLEND_SRC_CTRL));
- writel_relaxed(1 << 20,
- priv->io_base + _REG(OSD2_BLEND_SRC_CTRL));
+ writel_relaxed(VIU_OSD_BLEND_REORDER(0, 1) |
+ VIU_OSD_BLEND_REORDER(1, 0) |
+ VIU_OSD_BLEND_REORDER(2, 0) |
+ VIU_OSD_BLEND_REORDER(3, 0) |
+ VIU_OSD_BLEND_DIN_EN(1) |
+ VIU_OSD_BLEND1_DIN3_BYPASS_TO_DOUT1 |
+ VIU_OSD_BLEND1_DOUT_BYPASS_TO_BLEND2 |
+ VIU_OSD_BLEND_DIN0_BYPASS_TO_DOUT0 |
+ VIU_OSD_BLEND_BLEN2_PREMULT_EN(1) |
+ VIU_OSD_BLEND_HOLD_LINES(4),
+ priv->io_base + _REG(VIU_OSD_BLEND_CTRL));
+
+ writel_relaxed(VIU_OSD1_POSTBLD_SRC_OSD1,
+ priv->io_base + _REG(OSD1_BLEND_SRC_CTRL));
+ writel_relaxed(OSD_BLEND_PATH_SEL_ENABLE,
+ priv->io_base + _REG(OSD2_BLEND_SRC_CTRL));
writel_relaxed(0, priv->io_base + _REG(VD1_BLEND_SRC_CTRL));
writel_relaxed(0, priv->io_base + _REG(VD2_BLEND_SRC_CTRL));
writel_relaxed(0,
priv->io_base + _REG(VIU_OSD_BLEND_DUMMY_DATA0));
writel_relaxed(0,
priv->io_base + _REG(VIU_OSD_BLEND_DUMMY_ALPHA));
- writel_bits_relaxed(0x3 << 2, 0x3 << 2,
- priv->io_base + _REG(DOLBY_PATH_CTRL));
+
+ writel_bits_relaxed(DOLBY_BYPASS_EN(0xc), DOLBY_BYPASS_EN(0xc),
+ priv->io_base + _REG(DOLBY_PATH_CTRL));
}
priv->viu.osd1_enabled = false;
--
2.17.1
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
next prev parent reply other threads:[~2019-06-24 14:50 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-24 14:20 [PATCH 0/9] drm: meson: global clean-up (use proper macros, update comments ...) Julien Masson
2019-06-24 14:47 ` [PATCH 1/9] drm: meson: mask value when writing bits relaxed Julien Masson
2019-06-24 14:48 ` [PATCH 2/9] drm: meson: crtc: use proper macros instead of magic constants Julien Masson
2019-06-24 14:48 ` [PATCH 3/9] drm: meson: drv: use macro when initializing vpu Julien Masson
2019-06-24 14:48 ` [PATCH 4/9] drm: meson: vpp: use proper macros instead of magic constants Julien Masson
2019-06-24 23:15 ` Kevin Hilman
2019-08-08 14:09 ` Neil Armstrong
2019-06-24 14:48 ` Julien Masson [this message]
2019-06-24 14:48 ` [PATCH 6/9] drm: meson: venc: " Julien Masson
2019-06-24 14:48 ` [PATCH 7/9] drm: meson: global clean-up Julien Masson
2019-06-24 14:49 ` [PATCH 8/9] drm: meson: add macro used to enable HDMI PLL Julien Masson
2019-06-24 23:20 ` Kevin Hilman
2019-08-08 14:10 ` Neil Armstrong
2019-06-24 14:49 ` [PATCH 9/9] drm: meson: venc: set the correct macrovision max amplitude value Julien Masson
2019-06-24 23:24 ` [PATCH 0/9] drm: meson: global clean-up (use proper macros, update comments ...) Kevin Hilman
2019-08-08 14:12 ` Neil Armstrong
2019-08-09 9:29 ` Neil Armstrong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=86sgrz82em.fsf@baylibre.com \
--to=jmasson@baylibre.com \
--cc=86zhm782g5.fsf@baylibre.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=narmstrong@baylibre.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).