From: Maxime Jourdan <mjourdan@baylibre.com>
To: Hans Verkuil <hverkuil@xs4all.nl>,
Mauro Carvalho Chehab <mchehab@kernel.org>,
Hans Verkuil <hans.verkuil@cisco.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>,
Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
Kevin Hilman <khilman@baylibre.com>,
linux-kernel@vger.kernel.org, linux-amlogic@lists.infradead.org,
Jerome Brunet <jbrunet@baylibre.com>,
linux-arm-kernel@lists.infradead.org,
linux-media@vger.kernel.org
Subject: Re: [PATCH 0/2] media: meson: vdec: Add compliant H264 support
Date: Mon, 7 Oct 2019 18:24:21 +0200 [thread overview]
Message-ID: <977c48e8-8275-c96a-688b-ccfbb873eb79@baylibre.com> (raw)
In-Reply-To: <8563127e-fe2c-a633-556b-8a883cebb171@xs4all.nl>
On 07/10/2019 17:12, Hans Verkuil wrote:
> On 10/7/19 4:59 PM, Maxime Jourdan wrote:
>> Hello,
>>
>> This patch series aims to bring H.264 support as well as compliance update
>> to the amlogic stateful video decoder driver.
>>
>> There is 1 issue that remains currently:
>>
>> - The following codepath had to be commented out from v4l2-compliance as
>> it led to stalling:
>>
>> if (node->codec_mask & STATEFUL_DECODER) {
>> struct v4l2_decoder_cmd cmd;
>> buffer buf_cap(m2m_q);
>>
>> memset(&cmd, 0, sizeof(cmd));
>> cmd.cmd = V4L2_DEC_CMD_STOP;
>>
>> /* No buffers are queued, call STREAMON, then STOP */
>> fail_on_test(node->streamon(q.g_type()));
>> fail_on_test(node->streamon(m2m_q.g_type()));
>> fail_on_test(doioctl(node, VIDIOC_DECODER_CMD, &cmd));
>>
>> fail_on_test(buf_cap.querybuf(node, 0));
>> fail_on_test(buf_cap.qbuf(node));
>> fail_on_test(buf_cap.dqbuf(node));
>> fail_on_test(!(buf_cap.g_flags() & V4L2_BUF_FLAG_LAST));
>> for (unsigned p = 0; p < buf_cap.g_num_planes(); p++)
>> fail_on_test(buf_cap.g_bytesused(p));
>> fail_on_test(node->streamoff(q.g_type()));
>> fail_on_test(node->streamoff(m2m_q.g_type()));
>>
>> /* Call STREAMON, queue one CAPTURE buffer, then STOP */
>> fail_on_test(node->streamon(q.g_type()));
>> fail_on_test(node->streamon(m2m_q.g_type()));
>> fail_on_test(buf_cap.querybuf(node, 0));
>> fail_on_test(buf_cap.qbuf(node));
>> fail_on_test(doioctl(node, VIDIOC_DECODER_CMD, &cmd));
>>
>> fail_on_test(buf_cap.dqbuf(node));
>> fail_on_test(!(buf_cap.g_flags() & V4L2_BUF_FLAG_LAST));
>> for (unsigned p = 0; p < buf_cap.g_num_planes(); p++)
>> fail_on_test(buf_cap.g_bytesused(p));
>> fail_on_test(node->streamoff(q.g_type()));
>> fail_on_test(node->streamoff(m2m_q.g_type()));
>> }
>>
>> The reason for this is because the driver has a limitation where all
>> capturebuffers must be queued to the driver before STREAMON is effective.
>> The firmware needs to know in advance what all the buffers are before
>> starting to decode.
>> This limitation is enforced via q->min_buffers_needed.
>> As such, in this compliance codepath, STREAMON is never actually called
>> driver-side and there is a stall on fail_on_test(buf_cap.dqbuf(node));
>
> That's interesting. I will have to look more closely at this.
>
>>
>>
>> One last detail: V4L2_FMT_FLAG_DYN_RESOLUTION is currently not recognized
>> by v4l2-compliance, so it was left out for the test. However, it is
>> present in the patch series.
>
> It is definitely recognized by v4l2-compliance.
>
>>
>> The second patch has 3 "Alignment should match open parenthesis" lines
>> where I preferred to keep them that way.
>>
>> Thanks Stanimir for sharing your HDR file creation tools, this was very
>> helpful :).
>>
>> Maxime
>>
>> # v4l2-compliance --stream-from-hdr test-25fps.h264.hdr -s250
>> v4l2-compliance SHA: a162244d47d4bb01d0692da879dce5a070f118e7, 64 bits
>
> But this SHA isn't in the v4l-utils repo, so this makes me wonder where you
> got this repo from.
>
I am based off the hverkuil/vicodec branch. The SHA I am on is actually
05387265053bc6f9 ("test-media: add vicodec tests"), but it wasn't
updated as I found out it requires a new bootstrap to refresh the SHA.
Maybe some rebasing at some point got rid of a162244d.
I started fresh and ran it again. As you can see,
V4L2_FMT_FLAG_DYN_RESOLUTION is still problematic (removing it makes all
the checks pass):
-------------------------------
# v4l2-compliance --stream-from-hdr test-25fps.h264.hdr -s250
v4l2-compliance SHA: 05387265053bc6f9c8c98e112543adb28ae39cfa, 64 bits
Compliance test for meson-vdec device /dev/video0:
Driver Info:
Driver name : meson-vdec
Card type : Amlogic Video Decoder
Bus info : platform:meson-vdec
Driver version : 5.4.0
Capabilities : 0x84204000
Video Memory-to-Memory Multiplanar
Streaming
Extended Pix Format
Device Capabilities
Device Caps : 0x04204000
Video Memory-to-Memory Multiplanar
Streaming
Extended Pix Format
Detected Stateful Decoder
Required ioctls:
test VIDIOC_QUERYCAP: OK
Allow for multiple opens:
test second /dev/video0 open: OK
test VIDIOC_QUERYCAP: OK
test VIDIOC_G/S_PRIORITY: OK
test for unlimited opens: OK
Debug ioctls:
test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
test VIDIOC_LOG_STATUS: OK (Not Supported)
Input ioctls:
test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
test VIDIOC_ENUMAUDIO: OK (Not Supported)
test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
test VIDIOC_G/S_AUDIO: OK (Not Supported)
Inputs: 0 Audio Inputs: 0 Tuners: 0
Output ioctls:
test VIDIOC_G/S_MODULATOR: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_ENUMAUDOUT: OK (Not Supported)
test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
test VIDIOC_G/S_AUDOUT: OK (Not Supported)
Outputs: 0 Audio Outputs: 0 Modulators: 0
Input/Output configuration ioctls:
test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
test VIDIOC_G/S_EDID: OK (Not Supported)
Control ioctls:
test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
test VIDIOC_QUERYCTRL: OK
test VIDIOC_G/S_CTRL: OK
test VIDIOC_G/S/TRY_EXT_CTRLS: OK
test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
Standard Controls: 2 Private Controls: 0
Format ioctls:
fail: v4l2-test-formats.cpp(263): unknown flag 00000009 returned
test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: FAIL
test VIDIOC_G/S_PARM: OK (Not Supported)
test VIDIOC_G_FBUF: OK (Not Supported)
fail: v4l2-test-formats.cpp(457): pixelformat 34363248 (H264) for
buftype 10 not reported by ENUM_FMT
test VIDIOC_G_FMT: FAIL
fail: v4l2-test-formats.cpp(457): pixelformat 34363248 (H264) for
buftype 10 not reported by ENUM_FMT
test VIDIOC_TRY_FMT: FAIL
fail: v4l2-test-formats.cpp(457): pixelformat 3247504d (MPG2) for
buftype 10 not reported by ENUM_FMT
test VIDIOC_S_FMT: FAIL
test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
test Cropping: OK (Not Supported)
test Composing: OK (Not Supported)
test Scaling: OK
Codec ioctls:
test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
test VIDIOC_G_ENC_INDEX: OK (Not Supported)
test VIDIOC_(TRY_)DECODER_CMD: OK
Buffer ioctls:
test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
test VIDIOC_EXPBUF: OK
test Requests: OK (Not Supported)
Test input 0:
Streaming ioctls:
test read/write: OK (Not Supported)
test blocking wait: OK
Video Capture Multiplanar: Captured 250 buffers
test MMAP (select): OK
Video Capture Multiplanar: Captured 250 buffers
test MMAP (epoll): OK
test USERPTR (select): OK (Not Supported)
test DMABUF: Cannot test, specify --expbuf-device
Total for meson-vdec device /dev/video0: 49, Succeeded: 45, Failed: 4,
Warnings: 0
-------------------------------
Should I be using another branch than vicodec ?
> Regards,
>
> Hans
>
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
next prev parent reply other threads:[~2019-10-07 16:24 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-07 14:59 [PATCH 0/2] media: meson: vdec: Add compliant H264 support Maxime Jourdan
2019-10-07 14:59 ` [PATCH 1/2] media: meson: vdec: bring up to compliance Maxime Jourdan
2019-10-16 12:38 ` Hans Verkuil
2019-10-07 14:59 ` [PATCH 2/2] media: meson: vdec: add H.264 decoding support Maxime Jourdan
2019-10-08 20:27 ` Nicolas Dufresne
2019-10-08 20:44 ` Nicolas Dufresne
2019-10-08 21:23 ` Maxime Jourdan
2019-10-07 15:12 ` [PATCH 0/2] media: meson: vdec: Add compliant H264 support Hans Verkuil
2019-10-07 16:24 ` Maxime Jourdan [this message]
2019-10-07 16:39 ` Hans Verkuil
2019-10-08 13:40 ` Maxime Jourdan
2019-10-08 13:45 ` Hans Verkuil
2019-10-09 12:01 ` Hans Verkuil
2019-10-18 7:50 ` Maxime Jourdan
2019-10-18 9:23 ` Maxime Jourdan
2019-10-21 13:13 ` Hans Verkuil
2019-10-13 1:08 ` Nicolas Dufresne
2019-10-13 7:30 ` Maxime Jourdan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=977c48e8-8275-c96a-688b-ccfbb873eb79@baylibre.com \
--to=mjourdan@baylibre.com \
--cc=hans.verkuil@cisco.com \
--cc=hverkuil@xs4all.nl \
--cc=jbrunet@baylibre.com \
--cc=khilman@baylibre.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=martin.blumenstingl@googlemail.com \
--cc=mchehab@kernel.org \
--cc=narmstrong@baylibre.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).