Linux-Amlogic Archive on
 help / color / Atom feed
From: Linus Walleij <>
To: Guillaume La Roque <>
	<>, Kevin Hilman <>,
	"" <>,
	"open list:GPIO SUBSYSTEM" <>,
	"open list:ARM/Amlogic Meson..."
	Jerome Brunet <>
Subject: Re: [PATCH v6 0/6] Add drive-strength in Meson pinctrl driver
Date: Thu, 16 May 2019 14:52:03 +0200
Message-ID: <> (raw)
In-Reply-To: <>

On Tue, May 14, 2019 at 10:26 AM Guillaume La Roque
<> wrote:

> The purpose of this patchset is to add drive-strength support in meson pinconf
> driver. This is a new feature that was added on the g12a. It is critical for us
> to support this since many functions are failing with default pad drive-strength.
> The value achievable by the SoC are 0.5mA, 2.5mA, 3mA and 4mA and the DT property
> 'drive-strength' is expressed in mA.
> So this patch add another generic property "drive-strength-microamp". The change to do so
> would be minimal and could be benefit to other platforms later on.
> Cheers
> Guillaume
> Changes since v5:
> - restore Tested-by/Reviewed-by/Ack-by tags

All 6 patches applied for v5.3.

They will appear in the tree once v5.2-rc1 is out.

Linus Walleij

linux-amlogic mailing list

      parent reply index

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-14  8:26 Guillaume La Roque
2019-05-14  8:26 ` [PATCH v6 1/6] dt-bindings: pinctrl: add a 'drive-strength-microamp' property Guillaume La Roque
2019-05-14  8:26 ` [PATCH v6 2/6] pinctrl: generic: add new 'drive-strength-microamp' property support Guillaume La Roque
2019-05-14  8:26 ` [PATCH v6 3/6] dt-bindings: pinctrl: meson: Add drive-strength-microamp property Guillaume La Roque
2019-05-14  8:26 ` [PATCH v6 4/6] pinctrl: meson: Rework enable/disable bias part Guillaume La Roque
2019-05-14  8:26 ` [PATCH v6 5/6] pinctrl: meson: add support of drive-strength-microamp Guillaume La Roque
2019-05-14  8:26 ` [PATCH v6 6/6] pinctrl: meson: g12a: add DS bank value Guillaume La Roque
2019-05-16 12:52 ` Linus Walleij [this message]

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \ \ \ \ \ \ \ \ \ \

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-Amlogic Archive on

Archives are clonable:
	git clone --mirror linux-amlogic/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-amlogic linux-amlogic/ \
	public-inbox-index linux-amlogic

Newsgroup available over NNTP:

AGPL code for this site: git clone public-inbox