linux-amlogic.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
To: Neil Armstrong <narmstrong@baylibre.com>, hexdump0815@googlemail.com
Cc: ottuzzi@gmail.com, linux.amoon@gmail.com, khilman@baylibre.com,
	linux-kernel@vger.kernel.org, linux-amlogic@lists.infradead.org,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 1/2] ARM: dts: meson8b: add the nvmem cell with the board's MAC address
Date: Mon, 29 Jul 2019 23:45:51 +0200	[thread overview]
Message-ID: <CAFBinCC5Bz-Oe4G1dtABrU+RFWUmqpdgyuDdRPp=Mo_Cucz7Wg@mail.gmail.com> (raw)
In-Reply-To: <9814939f-8580-c8f6-5c2f-7e64db60e6ae@baylibre.com>

On Mon, Jul 29, 2019 at 9:11 AM Neil Armstrong <narmstrong@baylibre.com> wrote:
>
> Hi Martin,
>
> On 27/07/2019 21:46, Martin Blumenstingl wrote:
> > Amlogic's BSP kernel defines that all boards with a MAC address stored
> > in the eFuse have it at offset 0x1b4. It is up to the board to
> > decide whether to use this MAC address or not:
> > - Odroid-C1 uses the MAC address from the eFuse
> > - EC-100 seems to read the MAC address from eMMC
> >
> > Add the nvmem cell which describes the Ethernet MAC address. Don't
> > assign it to the Ethernet controller, because depending on the board the
> > actual MAC address may be read from somewhere else.
> >
> > Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> > ---
> >  arch/arm/boot/dts/meson8b.dtsi | 4 ++++
> >  1 file changed, 4 insertions(+)
> >
> > diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi
> > index 30fca9bb4bbe..c7de58b71d08 100644
> > --- a/arch/arm/boot/dts/meson8b.dtsi
> > +++ b/arch/arm/boot/dts/meson8b.dtsi
> > @@ -402,6 +402,10 @@
> >       clocks = <&clkc CLKID_EFUSE>;
> >       clock-names = "core";
> >
> > +     ethernet_mac_address: mac@1b4 {
> > +             reg = <0x1b4 0x6>;
> > +     };
>
> Is this a fixed position for all boards ? if not, I'll suggest moving
> it to the odroid-c1 dt until you have more users.
the 0x1b4 offset is hardcoded in Amlogic's kernel sources
if some board uses another offset then the manufacturer had to patch
the kernel to make it work (like Endless did)

+Cc hexdump0815 - can you please run the following command on your
Meson8b MXQ board:
$ hexdump -C /sys/bus/nvmem/devices/meson8b-efuse0/nvmem | grep
000001b0 | cut -d' ' -f7,8,9,10,12,13

this should print the MAC address that is also used by the stock
firmware and/or printed on the board
if it is then I'm happy to provide a patch also for your MXQ board so
it also uses the correct MAC address


Martin

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

  reply	other threads:[~2019-07-29 21:46 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-07-27 19:46 [PATCH 0/2] ARM: dts: meson8b: persistent MAC address for Odroid-C1 Martin Blumenstingl
2019-07-27 19:46 ` [PATCH 1/2] ARM: dts: meson8b: add the nvmem cell with the board's MAC address Martin Blumenstingl
2019-07-29  7:11   ` Neil Armstrong
2019-07-29 21:45     ` Martin Blumenstingl [this message]
2019-08-05 19:16       ` Martin Blumenstingl
2019-07-27 19:46 ` [PATCH 2/2] ARM: dts: meson8b: odroidc1: use the MAC address stored in the eFuse Martin Blumenstingl
2019-08-05 21:23 ` [PATCH 0/2] ARM: dts: meson8b: persistent MAC address for Odroid-C1 Kevin Hilman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CAFBinCC5Bz-Oe4G1dtABrU+RFWUmqpdgyuDdRPp=Mo_Cucz7Wg@mail.gmail.com' \
    --to=martin.blumenstingl@googlemail.com \
    --cc=hexdump0815@googlemail.com \
    --cc=khilman@baylibre.com \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux.amoon@gmail.com \
    --cc=narmstrong@baylibre.com \
    --cc=ottuzzi@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).